|
[China]
Trade Verify
Address: No.28,Shunyuan Road,Xinbei Dist,Changzhou,Jiangsu,China(Mainland)
Contact name:Kangtai Lee
Changzhou Vic-Tech Motor Technology Co., Ltd. |
|
Verified Suppliers
|
|
|
Motor basic step angle is 18 degrees, that is, 20 steps per turn, plus the deceleration box deceleration effect, the final motor rotation angle resolution can reach 0.05~6 degrees, can be used in many requirements
ApplicationAbout Micro stepper motor
Our micro stepper motors generally have 18 degrees step angle.(Full
step driving)
That means it takes 20 steps to rotate one turn.
Motor’s step angle is related to internal stator’s design.
We have micro stepper motors with different diameters, and motor’s
torque is related to its size.
Here is relationship between motor’s diameter and torque(with
suitable running frequency, at rated voltage):
6mm motor: about 1 g*cm
8mm motor: about 3g*cm
10mm motor: about 5 g*cm
15mm motor: about 15 g*cm
20mm motor: about 40 g*cm
Intelligent Security Products
Camera Lenses
Door Locks
Wearable device
| Product Name | 10mm micro stepper motor | |||
| Model | VSM1070 | |||
| Rated Voltage | 3.3V | |||
| Current Per Phase | 100 mA /phase | |||
| Coil Resistance | 40 Ω±7% | |||
| No. Of phase | 2 Phases | |||
| Step Angle | 18 degree | |||
| Excitation Method | 2 Phase Excitation | |||
| Drive Mode | Bipolar Drive | |||
| Pull-In Torque | 5.4 gf.cm ,(AT 5.0 V DC) | |||
| Pull-Out Torque | 6.0 gf.cm ,(AT 5.0 V DC) | |||
| Max. Response Frequency | 1250 pps,(AT 900 PPS , 5.0 V DC) | |||
| Max. Starting Frequency | 1950 pps,(AT 900 PPS , 5.0 V DC) | |||
| Insulation Class | Class E for Coils | |||
| Insulation Strength | 100 V AC for One Second | |||
| Insulation Resistance | 1.0 MΩ (DC 100 V) | |||
| Operating Temperature Range | -10~+60 ℃ | |||
| Weight | 4 g(Ref.) | |||
| OEM & ODM SERVICE | AVAILABLE | |||
Competitive Advantage
Customization service
Motor’s design can be adjusted based on customer’s requirement
including:
Motor’s diameter: we have 6mm, 8mm, 10mm, 15mm and 20 mm diameter
motor
Coil resistance/ rated voltage: coil resistance is adjustable, and
with higher resistance, motor’s rated voltage is higher.
Bracket design/ lead screw length: if customer want the bracket to
be longer/short, with special design such as mounting holes, it’s
adjustable.
PCB + cables + connector: PCB’s design, cable length and connector
pitch are all adjustable, they can be replaced into FPC if
customers require.
Motor input method with Pin type, FPC, PCB, Lead wire etc.
These can be customized according to customer needs.
The regular models are shown in the figure, and the special sizes can be customized.
