|
[China]
Trade Verify
Address: No.28,Shunyuan Road,Xinbei Dist,Changzhou,Jiangsu,China(Mainland)
Contact name:Kangtai Lee
Changzhou Vic-Tech Motor Technology Co., Ltd. |
|
Verified Suppliers
|
|
|
M3 Screw Shaft 2 Phase 10mm Mini Gear Type Stepper Motor 18 Degree Step Angle
This is a combination of a miniature stepper motor with a motor
diameter of 10MM plus a precision metal gearbox. In addition, we
have 6mm, 8mm, 10mm, 15mm and 20mm diameter motors for customers to
choose from.
The step angle of this motor is 18 degrees, i.e. 20 steps per
revolution. With the deceleration effect of the gearbox, the final
motor rotation angle resolution can reach 0.05~6 degrees, which can
be used for a variety of requirements and precise control of
rotation position.
Customers can match the gear speed ratio according to different
requirements of using torque speed, and the gearbox has 1:2 -
1:1000 gear ratio for customers to choose.
| Model No. | SM10-816G |
| Motor diameter | 10mm |
| Coil resistance | 30Ω±10%/phase |
| Number of phase | 2 phases |
| Step angle | 18°/step |
| Weight | 15 g |
| OEM&ODM SERVICE | AVAILABLE |
| EFFICIENCY | 10-20% |
The gear box has high precision, high efficiency and low noise,
which makes the product have good reliability.
The power input position of the stepper motor can be in the form of
FPC, FFC, PCB cable, etc.
The output shaft of the motor can adopt various output structures,
such as circular shaft, D-shaft and wire bar.
Geared stepper motors, widely used in Smart home, personal care, home appliance equipment, smart medical equipment, smart robot, smart logistics, smart cars, communication equipment, smart wearable devices, consumer electronics, camera equipment, and other industries.
1. Coil resistance/rated voltage: The coil resistance is
adjustable, the higher the resistance, the higher the rated voltage
of the motor.
2. Bracket design/slider length: If customers want longer or
shorter bracket, there are special design, such as mounting holes,
it is adjustable.
3. Slider design: the current slider is brass, it can be replaced
with plastic to save cost
4. PCB+cable+connector: PCB design, cable length, connector pitch
are adjustable, can be replaced with FPC according to customer's
need.
Lead time for samples:
Standard motors in stock: within 3 days
Standard motors not in stock: within 15 days
Customized products: About 25~30 days (based on complexity of
customization)
Lead time for building a new mold: generally about 45 days
Lead time for mass production: based on order quantity
Packaging:
Samples are packed in foam sponge with a paper box, shipped by
express
Mass production, motors are packed in corrugated cartons with
transparent film outside. (shipping by air)
If shipped by sea, product will be packed on pallets
On samples and air shipping, we use Fedex/TNT/UPS/DHL. (5~12 days for express service)
For sea shipping, we use our shipping agent, and ship from Shanghai
port. (45~70 days for sea shipping)
1.Are you a manufacturer?
Yes, we are a manufacture, and we produces mainly stepper motors.
2.Where is your factory location? Can we visit your factory?
Our factory is located in Changzhou, Jiangsu. Yes, you are very
welcome to visit us.
3.Can you provide free samples?
No, we don’t provide free samples. Customers won’t treat free
samples fairly.
4.Who pays for shipping cost? Can I use my shipping account?
Customers pay for shipping cost. We will quote you shipping cost.
If you think you have cheaper/more convenient shipping method, we
can use you shipping account.
5.What’s you MOQ? Can I order one motor?
We don’t have MOQ, and you can order only one piece sample.
But we recommend you to order a little bit more, just in case the
motor is damaged during your testing, and you can have a back-up.
6.We are developing a new project, do you provide customization
service? Can we sign a NDA contract?
We have over 20 years of experience in stepper motor industry.
We have developed many projects, we can provide full set
customization from design drawing to production.
We are confident we can give you few advice/suggestions for your
stepper motor project.
If you are worrying about confidential issues, yes, we can sign a
NDA contract.
7.Do you sell drivers? Do you produce them?
Yes, we do sell drivers. They are only suitable for temporary
sample test, not suitable for mass production.
We do not produce drivers, we only produce stepper motors
