|
[China]
Trade Verify
Address: No.28,Shunyuan Road,Xinbei Dist,Changzhou,Jiangsu,China(Mainland)
Contact name:Kangtai Lee
Changzhou Vic-Tech Motor Technology Co., Ltd. |
|
Verified Suppliers
|
|
|
6mm Micro Slider Linear Stepper Motor Screw Motor With Bracket Stepper Motor
VSM0632 is a precision micro stepping motor. The screw pitch of the output shaft is M1.7P0.3mm, and the screw is rotated into thrust through the screw and screw support.
The basic step angle of the motor is 18degrees, and the motor runs 40 steps every week, so the displacement resolution can reach 0.015mm, achieving the goal of precision control.
Because of its small size, high precision, easy control and other excellent characteristics, it is applied to precision equipment
The output of the motor is a bare needle. PCB, FPC, connecting wire and other output connection methods can be customized according to customer needs
| PRODUCT NAME | 6MM MICRO LINEAR STEPPER MOTOR |
| MODEL | VSM0632 |
| RATED VOLTAGE | 4.6 V |
| COIL RESISTANCE | 40Ω±10% |
| PHASE | 1-2 PHASE |
| MAX. STARTING FREQUENCY | 1100 pps min. (AT 4.6 VDC) |
| MAX. SLEWING FREQUENCY | 2000 PPS min. (AT 4.6 VDC) |
| PULL IN TORQUE | 40g min. (AT 500 PPS , 5.0V DC) |
| INSULATION CLASS | CLASS E FOR COILS |
| INSULATION STRENGTH | 300 V AC FOR ONE SECOND |
| INSULATION RESISTENCE | 1.0 MΩ (DC 100 V) |
| OPERATING TEMPERATURE RANGE | -10 ~+60 ℃ |
| OEM & ODM SERVICE | AVAILABLE |
Medical devices, robotics field, smart home, automotive drive, aircraft, consumer electronics, industrial automation, optical instruments and equipment field, etc.
1. cheaper (compared to stepper motors)
2. Smaller size
3. Direct connection, easy to use
4. Wide range of use
5. Fast speed of rotation
6. Higher efficiency (compared with stepper motors)
Motor’s design can be adjusted based on customer’s requirement
including:
Motor’s diameter: we have 6mm, 8mm, 10mm, 15mm and 20 mm diameter
motor
Coil resistance/ rated voltage: coil resistance is adjustable, and
with higher resistance, motor’s rated voltage is higher.
Bracket design/ lead screw length: if customer want the bracket to
be longer/short, with special design such as mounting holes, it’s
adjustable.
PCB + cables + connector: PCB’s design, cable length and connector
pitch are all adjustable, they can be replaced into FPC if
customers require.
Lead time for samples:
Standard motors in stock: within 3 days
Standard motors not in stock: within 15 days
Customized products: About 25~30 days (based on complexity of
customization)
Lead time for building a new mold: generally about 45 days
Lead time for mass production: based on order quantity
Packaging:
Samples are packed in foam sponge with a paper box, shipped by
express
Mass production, motors are packed in corrugated cartons with
transparent film outside. (shipping by air)
If shipped by sea, product will be packed on pallets
On samples and air shipping, we use Fedex/TNT/UPS/DHL. (5~12 days for express service)
For sea shipping, we use our shipping agent, and ship from Shanghai
port. (45~70 days for sea shipping)
1.Are you a manufacturer?
Yes, we are a manufacture, and we produces mainly stepper motors.
2.Where is your factory location? Can we visit your factory?
Our factory is located in Changzhou, Jiangsu. Yes, you are very
welcome to visit us.
3.Can you provide free samples?
No, we don’t provide free samples. Customers won’t treat free
samples fairly.
4.Who pays for shipping cost? Can I use my shipping account?
Customers pay for shipping cost. We will quote you shipping cost.
If you think you have cheaper/more convenient shipping method, we
can use you shipping account.
5.What’s you MOQ? Can I order one motor?
We don’t have MOQ, and you can order only one piece sample.
But we recommend you to order a little bit more, just in case the
motor is damaged during your testing, and you can have a back-up.
6.We are developing a new project, do you provide customization
service? Can we sign a NDA contract?
We have over 20 years of experience in stepper motor industry.
We have developed many projects, we can provide full set
customization from design drawing to production.
We are confident we can give you few advice/suggestions for your
stepper motor project.
If you are worrying about confidential issues, yes, we can sign a
NDA contract.
7.Do you sell drivers? Do you produce them?
Yes, we do sell drivers. They are only suitable for temporary
sample test, not suitable for mass production.
We do not produce drivers, we only produce stepper motors
