|
[China]
Trade Verify
Address: No.28,Shunyuan Road,Xinbei Dist,Changzhou,Jiangsu,China(Mainland)
Contact name:Kangtai Lee
Changzhou Vic-Tech Motor Technology Co., Ltd. |
|
Verified Suppliers
|
|
|
VSM10152 is a 10mm diameter precision screw motor with a 0.4mm pitch screw on the output shaft. The screw is supported by the screw and rotates into thrust.
The stepping angle of the motor is 18 degrees, and the motor runs 20 steps per week, so the displacement resolution can reach 0.02mm, achieving precise control.
The actuator adopts a subdivision driving method to meet the requirements.
Our team has over 10 years of experience in stepper motor design, development, and production, and can achieve product development and auxiliary design based on customers' special needs!
The customer's needs are our efforts, please feel free to contact us!
Intelligent Security Products
Camera Lenses
Door Locks
Wearable device
| Product Name | 10mm micro stepper motor | |||
| Model | VSM10152 | |||
| Rated Voltage | 3.3V | |||
Coil Resistance | 10±10%ohm | |||
No.Of Phases | 2 Phases | |||
Step Angle | 18°/Step | |||
MAX. STARTING FREQUENCY | 1000 PPS min. (AT 3.3 V DC) | |||
MAX. SLEWING FREQUENCY | 1200 PPS min. (AT 3.3 V DC) | |||
PULL IN TORQUE | 3.5 gf-cm min. (AT 500 PPS , 3.3V DC) | |||
PULL OUT TORQUE | 4.5gf-cm min. (AT 500 PPS , 3.3V DC) | |||
INSULATION CLASS | CLASS E FOR COILS | |||
INSULATION STRENGTH | 300V AC FOR ONE SECOND | |||
INSULATION RESISTENCE | 50 MΩ (DC 100 V) | |||
OPERATING TEMPERATURE RANGE | -20~+70℃ | |||
OEM & ODM SERVICE | AVAILABLE | |||
Competitive Advantage
Motor input method with Pin type, FPC, PCB, Lead wire etc.
These can be customized according to customer needs.
The regular models are shown in the figure, and the special sizes can be customized.
