Active Member
|
[China]
Address: Building 2, Chaoloft Cultural Creative Park, Liukou Community, Dalang Street, Longhua District, Shenzhen
Contact name:Enya
Shenzhen Secore Technology Co.,Ltd |
|
|
Built-In Driver 36mm Brushless Motor Low Noise Water Pump Bldc
Motor
DC Brushless inner rotor Motors :
Size: diameter 36*22mm length
Built-in driver
PWM pulse wide speed range
FG speed feedback signal
Low EMC,Low noise
Power: 15W ( internal driver )
| Model # | RATED Voltage | NO LOAD | AT MAXIMUM EFFICIENCY | STALL | |||||
| SPEED | CURRENT | SPEED | TORQUE | CURRENT | Out. Power | TORQUE | CURRENT | ||
| VDC | ±10% r/min | mA | ±10% r/min | g.cm | mA | W | g.cm | A | |
| BLS-3625-12 | 12 | 4500 | 90 | 3650 | 50 | 280 | 1.9 | 280 | 1.25 |
| BLS-3625-24 | 24 | 4500 | 60 | 3700 | 50 | 160 | 1.9 | 310 | 0.65 |
Motor dimensions
A Brushless motor overcomes the need of a mechanical
commutator by reversing the motor set-up; The windings become the
stator and the permanent magnets become part of the rotor. The
stator typically consists of steel laminations, slotted axially to
accommodate an even number of windings along their inner perimeter.
The rotor consists of a shaft and a hub with permanent magnets
arranged in two to eight pole pairs alternating between "N" and
"S". Because the windings are fixed, a permanent connection can be
made to energize them. In order for the stationary windings to move
the permanent magnets, the windings need to be energized (or
commutated) in a controlled sequence to produce rotating magnetic.
