Home Companies Shandong Chuangxin Building Materials Complete Equipments Co., Ltd

Fiber Cement Board Sheet Forming Machine for House Building / Partition Board

Contact Us

[China]

Trade Verify

Address: #11667 erhuanxi road jinan city shandong province china

Contact name:Kevin

Shandong Chuangxin Building Materials Complete Equipments Co., Ltd

Verified Suppliers

Trust
Seal
Verified
Supplier
Credit
Check
Capability
Assessment

Fiber Cement Board Sheet Forming Machine for House Building / Partition Board

Country/Region	china
City & Province	jinan shandong

Product Details

Fiber Cement Board Sheet Forming Machine for House Building / Partition Board

Fiber Cement Board Roofing Sheets Manufacturing Machine for House Building

Fiber Cement Board Making Machinery Production Machine With 2000 SQM Capacity

Product Description

Cement fiber board is a new type light-weight and high-strength material. It is made of siliceous materials (main component is SiO2), cement and fiber of certain quantity. It is made in such procedures: Making slurry, shaping, curing &maintaining, drying, etc. The cement fiber board which is different from traditional building material production has higher requirements on techniques and equipments. The high quality cement fiber board production depends on the quality of product's raw material, technology, advanced equipment and management experience.

No	Equipment name	Qty	Unit
1	Water return setting tank	2	Pcs
2	Asbestos wheel rolling machine	1	Set
3	Asbestos defibered machine	1	Set
4	pulp making machine	1	Set
5	600grinding pulp machine	1	Set
6	Hopper slurry convey machine	1	Set
7	Board makingmachine	1	Set
8	Green board beltconveyor	1	Set
9	Three-station stacking machine	1	Set
10	Electrical control device	1	Set
11	Three-station demoulding machine	1	Set
12	Mould oil-brushing macine	1	Set
13	Lifting device	2	Set
14	Return material mixer	1	Set
15	Trolley	25	Set
16	Transmit cart	4	Set
17	Two-station stacking machine	1	Set
18	Slurry making machine	1	Set
19	Platform pressure machine	1	Set
20	Bulk cement measure device	1	Set
21	Cement silo	1	Pc

Basic technical data
1. Product name: Non-asbestos fiber cement board
2. Standard: In conformity with National Building Material Industry Standard JC/T 412.1-2006. < Non-asbestos fiber cement board>
3. Raw material: Cement, reinforced fiber, coal ash additives
4. Product specification: ( L*W*T) 2440× 1220× 6-30mm
5. Capacity: 3 million -5million /year( calculate by 2440× 1220× 6mm board, 24 working hours continous production )
6. Production organization arrangement: 1) 3 shifts per day, 8 hours per shift, 300working days per year 2)total wokers need for this line is 52 staff, including 2 management staff, 2 techincal staff and 48 workers.
No. Test items Standard indicators Test results
1 Bending degrees
Horizontal > =22Mpa 24.9Mpa Qualified
Vertical > =17 Mpa 21.4Mpa
2 Impact strength > =2.0 KJ/m2 3.7KJ/m2 Qualified
3 Indensity > =1.6g/cm3 1.72g/cm3 Qualified
4 Water absorption < =24% 16.8% Qualified
5 Waterproofness According to the National standard GB8041 tested -24H checking allow damp mark on the back of the board, but no water drop Meet the National standard GB8041 Qualified
6 Freezing resistance According to the National standard GB8041 tested- after 25 times Cycliccrackingno break and layer appear Meet the National standard GB804

Compressive Strength	~20 MPa (3, 000 PSI)
Impact Resistance	> 6 kJ/m2
Tensile Strength	> 5.5 MPa
Density (Specific Mass)	~1000 Kg/m3 (+/-< 2%)
Moisture Absorption	~26% maximum saturation (slow absorption rate)
Moisture Content	~6%
Water Vapour Diffusion	~28 / 35
Specific Heat	~930 J/kgK
Thermal Conductivity	~0.44 W / mK
Modulus of elasticity	~6045 N/mm2
Flexibility UNI E 12372	~20.1 N/mm2 maximum 12mm x 1220 x 2440 = 10 N/mm2
Surface Alkalinity	~10 Ph
Thermal Expansion Hot/Cold	0, 01 mm/mC (from temp +20C to -20C)
Expansion in Water	less than < 0.02% from ambient to saturation
Freeze / Thaw - UNI EN 520	100 cycles without notable effects
Frost Resistance	no water drops form on surface
Combustibility / Fire Ratings	non-combustible / 12mm exceeds 1 hr fire rating
Dimensional tolerance	thick 0.2mm / width 2mm / length 3mm / Sq. 3mm
Toxicity Pollutants Heavy Metals - UNI EN 12457-2	Below measurable levels of test instruments
Asbestos Analysis	Absent - not measurable
Formaldehyde Analysis	Absent - not measurable
Sound Attenuation (9mm)	tested design ASTM E90 = STC 48, 50, 55, & 60
Color	Slate Grey and Chalk White
Surface texture	smooth one side; uniform machine textured back
Basic Compounds	(MgO)+(natural silicates)+(glass fibre)+(wood fibre)