Ceiling / Wall skirting / Decorating Magnesium Oxide Board
Production Line Adjustable Thick
Full Auto-Matic MGO Board Production Line Making Machine,Panel
Making Machines
MGO board machine
Product Description
AUTO-MATIC mgo board production line
1. Production Line
MGO Board Production Line can produces all kinds of magnesium oxide
boards, they can be used for ceiling, wall skirting, decorating of
indoor wall and lining board for furniture. It can replace
three-ply board, five-ply board, flakeboard, MDF (Medium Density
Fiberboard ) and Gypsum Board. It is really environment product and
lower cost.
2. Raw material and cost analysis
The product is formed with crushed crop straw or sawdust and some
inorganic chemical materials at one time after roller-extruding.
The source of raw materials is widely and they are purchased easily
for customers.
Take specification of 1.22mX2.44mX3mm as example, the cost is 7~8
Yuan, and the market price is generally 13~16 Yuan.
3. Technology features
There is not any requirement about high temperature and high
pressure during production processing. The board will be formed at
one time after roller-extruding under the conditions of normal
temperature and normal pressure. This is a green
environmental-protection project, because that there is no waste
water, waste materials and waste gas during its production
processing. The finished board don't need high temperature drying,
air-drying and watering, and under the normal temperature, they
will dry well indoor.
4. Equipment Model and Product Specification
According to different production, our equipment has 6 models for
large-scale, middle-scale and small-scale. Our all equipment can
produce board with same quality and specification but different
production.
The board with the thickness of 2-60mm, the biggest width of 1,
300mm and unlimited length. So you can adjust the thickness of
board at will. The standard specification of the board is
1.22mX2.44m.
5. After-sale
After purchased the equipment, we will teach relevant technology
for free, and will go to your factory for installation and testing
until you can produce the qualified product by yourself. Our
company will train 2-3 technical personnel for free until he can
get the skill. We will take responsibility for provide technical
consultation and following-up service for a long time, the
equipment warranty period is one year.
Advantages of our machine:
1. Automatically control the temperature (electricity, water, steam
can heat it), hydraulic pressure for moulds, configured secondary
net, accurate positioning
2. Whole machine vibration, hydraulic pressure whole damper, mother
slot and son slot forming at one time, with high rate of
mechanization.
3. This machine can produce pre-stress board for outside use and
inside use (foaming board, composite board and core board)
4. Plastic core, NO need to wash it.
5...Multi-function: Cement light panel, GRC partition wall board,
etc 
