|
[China]
Trade Verify
Address: #11667 erhuanxi road jinan city shandong province china
Contact name:Kevin
Shandong Chuangxin Building Materials Complete Equipments Co., Ltd |
|
Verified Suppliers
|
|
|
EPS roof and wall panel iron sheet forming machine production line
Specifications of Wall Panel Machine
The equipment has high automatization degree, simple production
technology, low labor intensity and production line, and there is no noise
and three-wastes during production.
| capacity | 1200 sheets / shift |
Main process | Processing |
warranry | 1 year |
| Features of machine | Long Worklife |
| Raw materials | mgo/mgcl/fiber glass mesh |
| Type | free standing |
| power | 50HZ |
| Materials | strenghten steel |
| Product Keywords | wall panel machine
|
Technology Features
There is not any requirement about high temperature and high pressure
during production processing. the boarad will be formed at one time after
roller-extruding under the conditions of normal temperation and normal
pressure .this is a green environmental-protection project, because that
there is no waste water ,waste materials and waste gas during its production
processing .the finised board don’t need high temperature drying ,air-drying
and watering ,and under the normal temperature ,they will dry well indoor.
| Oxygenic index % | >90 |
| Level combustion | SO |
| Vertical combustion | SO |
| Water content rate | 10.9% |
| Capacity | 1.15g/cm3 |
| Static bending intentsity | 169.46Mpa |
| Density | T/m3 1.13 |
Wall board production line has workshop and raw material warehouse.
Workshop: over 300m2-800m2,
worker: 10-16 person; fresh water; electricity:8-20KW
