Shandong Chuangxin Building Materials Complete Equipments Co., Ltd |
Verified Suppliers
|
|
Manufacture Prodcution Line Magnesium Oxide Sheets Machine for
Building Materials
The production line mainly produce all kinds of magnesium oxide
boards ,they can be used for ceiling,wall skirting ,decorating of
wall indoor and lining board for furniture .
Product features
The product manufactured by this equipment has following
features:fireproof ,waterproof,environment protection and no
toxicity .at the same time it is resistant against acid,alkali and
aging. This product can be nailed,planed ,sawed and sticked.in the
view of that its fireproofing grade is A .so our product will not
be combustible when the fire is 800-1000C.at the same time when our
product is fell to the water for a week ,there are not the
following phenomenon such as chalking,deformation and warp.in light
of there is not glue in the raw materials.so there is not
formaldhyde and benzenz for our boards .
1 | Air-dry density | ≤ (Standard index)50kg/m2 | (Test Value) 30.0kg/ m2 |
2 | Drying shrinkage rate of the board | ≤0.08% | 0.015% |
3 | Anti-breaking load | ≥1400N | 5640N |
4 | Anti-impact | No breakage phenomenon such as cracking after three impacts | No breakage phenomenon such as cracking after three impacts |
5 | Thermal resistance of main section (T=90mm) | ≥1.35(m2.k)/w | ≥1.36(m2.k)/w |
6 | Thermal bridges area ratio | ≤8% | 2.22% |
7 | Sound reduction Index | 36dB | |
8 | Radioactivity | None |
Structure principle and specification
Production line for mgo board with fashionable design ,reasonable
structure, stable running manufactures even thickness board in
large production once through double ways roll-in technology .This
production line is equipped with shaking device which can remove
inside and outside air bubble .so our board is more compact .in
addition,we use the no-woven cloth as the separating film to
increase the toughness and the strength of the board .The machine
can be adjusted arbitrarily ,and then produce the board with the
thickness of 2-25mm,the biggest width of 1,300mm and unlimited
length .so you can adjust the thickness of board at will.
The one machine can manufacture several board
simulated wooden board :After national grade testing ,its appearance is the same as that
of the wooden board ,and its decorating effect, performance and
performance-to-price atio are all better than the same board .with
a large breadth ,it not only has the features which the wooden
board owns ,such as nailed ,sawed ,planed and stuck,but also don’t
need painting ,so it is green environment-friendly. For example :
simulation beech board red(black) walaut board and
bubinga(canthor).
Fireproof embossed door:after province-level detection ,it has such features:fireproof
,water-proof ,sound insulation ,heat preservation,variety and low
cost.
Wall decorating mural painting:The board produced by the board-making machine can be made into
various decorating art mural painting about landscape,
flower-and-bird,insect-and-fish as well as character.the product
gets popularity from customers with excellent quality and
reasonable price
Vent-pipe :The polystylrene sandwich panle produced by this machine can be
made into the vent-pipe used by the central air-conditioning system
and all kinds of ventilation facility ,and the product is fireproof
,damp-proof,antiseptic,light-weight,heat-preservation
,long-performance life and low-price.In view of the above
features,it wins much favor from users.
Building mould board :The strengthened mould plate with this technology can replace
steel mould board ,bamboo&wood mould board and multiayer board
.Being a high-profit product ,this board is applied widely in all
kinds of concrete engineering with low-cost,high strength,long life
and convenient to use .the board is high-profit product
In addition , in view of unique effect and great profit,various
embossed board with decorative pattern and glazd pantile can
replace carved wall board of wallpaper
Benefit Analysis
Cost accounting
raw material cost:15 yuan/piece;0.5 yuan/piece;
water-electricity fee:0.2 yuan/piece
depreciation of the workshop:0.2yuan/piece
Total:15.90yuan/piece
Profit analysis(take the middle-scale equipment as example), 400 pieces per day
,at the common price of 40 yuan/piece to sell,and then the profit
per piece is that: 40 yuan/piece-15.9yuan/piece=24.1 yuan/piece,the
profit per day is that:400 pieces*24.1yuan/piece=9640yuan
Advantages | ||
Number | Item | Content |
1 | Low cost | Low labour and raw materials costs |
2 | Long life | Up to 30 years |
3 | Recycling use | Reused for more than 8 times |
4 | Environment protection | Environment-friendly raw materials used |
5 | Flexible layout | adjusted according to your requirement |