Haiyan Hager Fastener Co., Ltd. |
Verified Suppliers
|
|
A ANSI 304 stainless steel hex Head bolt that is produced as ASTM F593 Group 1 must have additional processes performed that exceed the requirements of A193 grade B8. These bolts must be stamped with manufacturer’s identifier, “F593″, and the proper condition designation, and if the bolts are hot formed, they must also be carbide solution annealed. Additionally, F593 bolts must pass an intergranular corrosion test, which is not required when bolts are ordered as type 304 stainless steel or under the ASTM A193 grade B8 specification. F593 does not have the same 8UN series thread requirement above 1″ diameter as A193 grade B8, and is typically provided with Unified National Coarse threads. The F593 specification is also characterized by a maximum diameter of 1-1/2”.
Group | Alloy | Condition |
---|---|---|
1 | 303, 304, 304L, 305, 384, XM1, 18-9LW, 302HQ, 303Se | (CW) Cold worked |
2 | 316, 316L | (CW) Cold worked |
3 | 321, 347 | (CW) Cold worked |
4 | 430, 430F | (CW) Cold worked |
5 | 410, 416, 416Se | (H) Hardened and Tempered |
6 | 431 | (H) Hardened and Tempered |
7 | 630 (17-4) | (AH) age Hardened |