|
[China]
Trade Verify
Address: Room 901,Building 1,Jinhuizhibo Square,No.199 Yanhu West Road,Haiyan,Zhejiang,China
Contact name:Gu Juan Ping
Haiyan Hager Fastener Co., Ltd. |
|
Verified Suppliers
|
|
|
A193 B16 Stainless Steel full threaded rods,thread stud
All thread rod is manufactured in 3 ways: mass-produced, cut-to-length, and cut thread. Common grades and diameters are mass produced and available across the country. Cut-to-length all thread rod uses mass-produced rods which are then cut to the finished length with the ends chamfered. Cut thread all thread rod is manufactured for special grades of steel that are not mass produced. These rods are cut slightly longer than the finished length, fully threaded, then cut to the finished length and chamfered on each end. For all manufacturing styles, the all thread rod can then be galvanized or coated per the customer’s requirements
ASTM A193 B16 Chemical Properties and Physical Characteristics
| C | Mn | P | S | Si | Cr | Mo | Al | V |
| 0.36-0.47 | 0.45-0.70 | 0.035 Max | 0.04 Max | 0.15-0.35 | 0.80-1.15 | 0.50-0.65 | 0.015Max | 0.25-0.35 |
| Dia | Minimum Temperature ° F (°C) | Tensile Strength min, ksi ( MPa) | Yield Strength. min, 0.2% offset, Ksi ( MPa) | Elongation in 4D min % | Reduction of Area min % | Hardness max | ||
| 21/2" and under | 1200(650) | 125(860) | 105(725) | 18 | 50 | 321HB or 35 HRC | ||
| over 21/2" to 4" | 1200(650) | 110(760) | 95(655) | 17 | 45 | 302HB or 33 HRC | ||
| over 4" to 7" | 1200(650) | 100(690) | 85(586) | 16 | 45 | 227HB or 29 HRC | ||
