|
[China]
Trade Verify
Address: Room 901,Building 1,Jinhuizhibo Square,No.199 Yanhu West Road,Haiyan,Zhejiang,China
Contact name:Gu Juan Ping
Haiyan Hager Fastener Co., Ltd. |
|
Verified Suppliers
|
|
|
A193 B16 Stainless Steel full threaded rods,thread stud
ASTM A193 Grade B16 bolts and threaded studs are manufactured from a chromium-molybdenum-vanadium alloy steel. Although A193 Grade B16 bolts and studs have similar strength requirements as Grade B7, the vanadium and higher tempering temperature helps the fasteners retain their molecular structure and strength under higher ambient temperatures than Grade B7. Grade B16 bolts and studs are used in the power and petrochemical industries on boilers, turbines, and other pressurized equipment with elevated temperatures. Unlike the stainless steel grades within the A193 specification, Grade B16 has no corrosion-resistant properties unless they are coated.
The ASME A193 designation covers fasteners intended for use in pressure vessels, valves, flanges, and fittings. The addition of vanadium makes this heat treated chromoly steel (AISI 4140) particularly resilient in high temperature environments. A-193 B16 is considered as the most suitable for bolts used at temperature below 450°C with a minimum effect on its structural strength up to 1,100°F.
ASTM A193 B16 Chemical Properties and Physical Characteristics
| C | Mn | P | S | Si | Cr | Mo | Al | V |
| 0.36-0.47 | 0.45-0.70 | 0.035 Max | 0.04 Max | 0.15-0.35 | 0.80-1.15 | 0.50-0.65 | 0.015Max | 0.25-0.35 |
| Dia | Minimum Temperature ° F (°C) | Tensile Strength min, ksi ( MPa) | Yield Strength. min, 0.2% offset, Ksi ( MPa) | Elongation in 4D min % | Reduction of Area min % | Hardness max | ||
| 21/2" and under | 1200(650) | 125(860) | 105(725) | 18 | 50 | 321HB or 35 HRC | ||
| over 21/2" to 4" | 1200(650) | 110(760) | 95(655) | 17 | 45 | 302HB or 33 HRC | ||
| over 4" to 7" | 1200(650) | 100(690) | 85(586) | 16 | 45 | 227HB or 29 HRC | ||
