|
[China]
Trade Verify
Address: Room 2508, 25 / f, Unit 1, Block B, Wanrun International Plaza, Gaoxin 4th Road, Baoji City, Shaanxi Province, China
Contact name:Myrna
Baoji Lihua Nonferrous Metals Co., Ltd. |
|
Verified Suppliers
|
|
|
Titanium Gr 2 Bar, ASTM B348 Titanium Grade 2 Round Bars, Titanium UNS R50400 Bright Bar, Titanium Gr 2 Hexagonal Bar, Titanium Round Bar, Titanium Alloy Grade 2 Rods Suppliers and Dealer in Baoji, China.
Titanium Grade 2 Square Bars is the most generally used and extensively obtainable grade of unalloyed titanium.
These Titanium Grade 2 Flat Bars is characteristically used in applications that need higher corrosion resistance
in different hostile media. Titanium Grade 2 Threaded Bars as well offers superior strength and formability between
grades 1 and 3. Titanium Grade 2 Hollow Bars provides soaring corrosion resistance and a better operational array
than aluminum. By means of outstanding corrosion resistance, formability and moderate strength, Titanium Grade 2
Hexagonal Bars signifies the most extensively used form of titanium. Meanwhile, Titanium Grade 2 Triangular Bars
are also being offered in different sizes and shapes to our customers. Titanium Grade 2 Bars has a minimum yield
strength of 275 Mpa (40 ksi), and relatively low levels of impurity elements, which places it between Grades 1 and 3
in terms of strength. This is partly due to low density and corrosion resistance of Titanium Grade 2 Rods which can
be easily welded, hot and cold worked and machined. Ti Alloy Gr. 2 Round Bars is used where corrosion resistance
is an important criterion, or where operating temperatures preclude the use of aluminum. Ti Alloy Gr. 2 Bars is used
in a wide range of industrial applications from oil & gas and chemical to marine industries.
Titanium Alloy Gr 2 Round Bar Specifications | ||
| Specifications | : | ASTM B348/ ASTM SB348 |
| Material | : | Grade titanium |
| Diameter | : | 3 mm to 100 mm |
| Length | : | 100 mm To 3000 mm |
| Finish | : | Bright |
| Tolerance | : | H8, H9, H10, H11, H12, H13K9, K10, K11, K12 or as per clients’ requirements |
| Form | : | Round, Square, Hex (A/F), Rectangle, Billet, Ingot, Forging Etc. |
Chemical composition (Wt%)
| ASTM No. | Fe max | O max | N max | C max | H max | Pd | Al | Bal |
| Grade 2 | 0.3 | 0.25 | 0.03 | 0.1 | 0.015 | - | - | Ti |
Physical Properties (Min)
| ASTM Grade | Alloy Composition | Tensile Strength | Yield Strength | Elongation min % | ||
| ksi | Mpa | ksi | Mpa | |||
| Grade 2 | Unalloyed Ti ("Pure") 50A -CP2 | 58 | 400 | 40 | 275 | 25 |
Material Testing:
We,Baoji Lihua ensure that all our materials go through strict
quality tests before dispatching them to our clients.
• Mechanical Testing Such as Tensile of Area
• Hardness Test
• Chemical Analysis – Spectro Analysis
• Positive Material Identification – PMI Testing
• Flattening Test
• Micro and MacroTest
• Pitting Resistance Test
• Flaring Test
• Intergranular Corrosion (IGC) Test
Grade 2 Titanium Rods Test Certificates
We,Baoji Lihua provide Manufacturer TC (Test Certificate) in accordance to EN 10204/3.1B, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection Report. We also provide Standard certificates like EN 10204 3.1 and additional requirement like. NACE MR 01075. FERRIT CONTENT as per norms if requested by clients.
• EN 10204/3.1B,
• Raw Materials Certificate
• 100% Radiography Test Report
• Third Party Inspection Report, etc
