Active Member
|
[China]
Address: CANGZHOU, HEBEI, CHINA
Contact name:Linda
DLY Metal Roofing Machine |
|
|
1250mm 380V Sinus Corrugated Machine With Hydraulic Cutting
1. Description of Corrugated Roofing Machine
Now our corrugated sheet roll former have been exported to many countries, the most important is that all you need can be customized. There are different popular width of coils in different market, so there are different width of corrugated sheets.
If you have coil width is 1250mm, the width of corrugated sheet will be 1064mm.
If you have coil width is 1200mm, the width of corrugated sheet will be 988mm
If you have coil width is 1000mm, the width of corrugated sheet will be 836mm
If you have coil width is 914mm, the width of corrugated sheet will be 762mm
2. Specifications of Corrugated Roofing Machine
Item | Name | Description |
1 | Feeding device | with two hand wheels to adjust the feeding of the material,with
bearing inside of the feeding rollers. |
2 | Machine body | 350H steel welded |
3 | Machine frame | 18mm middle plate welded |
4 | Roller station | 16 stations |
5 | Roller material | 45# steel with quenched treatment and hard chroming |
6 | Shaft diameter | 80mm,solid |
7 | Shaft material | 45# steel with tempering treatment |
8 | Motor power | 5.5 kw |
9 | Speed | 0-20m/min |
10 | Transmission | By Double chains |
11 | Voltage | 380V,50HZ,3PH |
3. workflow of Corrugated Roofing Machine
Manual decoiler——Feeding——Roll forming——Hydraulic stamp and cutting——Output table
4. Service of our Corrugated Roofing Machine
5. details of Corrugated Roofing Machine
