Active Member
|
[China]
Address: No. 1, Xingyuan Road, Gu Shan Town, Jiangyin city, Jiangsu Province, China
Contact name:Emma Teng
Jiangyin Dingbo Technology CO., Ltd. |
|
|
(1-4mm)x1250mm Slitting line
Brief descriptions
The steel coil slitting line is used to roll the metal strip, leveling, According to the required length of lateral slitting, and neatly stacked. Unit adopts dc speed control system, pneumatic, hydraulic control system and PLC control system. The seep of slitting, single machine adjustment and full automatic operation control all concentrated in the console, stable performance, safe and convenient operation.
Working flow
From right to left are: Entry coil car→Hydraulic decoiler →Hydraulic press and pinch device→Hydraulic cutter→Looper 1→Side guide device→ Slitter→Scrap winder→Looper 2→Tension stand →Recoielr→Exit coil car
Main technical parameter
| Items | Specifications | |
| Material | Material | PPGI/GI |
| Material Width | 1250mm | |
| Material Thickness | 1mm to 4 mm | |
| Slitting | Rolling Speed | 0-30m/min |
| Shaft DIA | D250mm | |
| Main Motor Power | 22kw | |
| Structure | Wall plate(20mm) | |
| Slitting Blades | 10blades | |
| Material of Blade | Cr12Mov, quenching 58-62° | |
| Transmission | Chain | |
| Damping | 3rollers | 45#steel |
| Scrap winder | Power | 4KW |
| Electric Source | 380V, 50HZ(Customized) |
Machine components
| No | Name | Quantity |
| 1 | Entry coil car | 1 set |
| 2 | Hydraulic decoiler | 1 set |
| 3 | Hydraulic press and pinch device | 1 set |
| 4 | Hydraulic cutter | 1 set |
| 5 | Looper 1 | 1 set |
| 6 | Side guide device | 1 set |
| 7 | Slitter | 1 set |
| 8 | Scrap winder | 1 set |
| 9 | Looper 2 | 1 set |
| 10 | Tension stand | 1 set |
| 11 | Recoiler | 1 set |
| 12 | Exit coil car | 1 set |
| 13 | Hydraulic system | 1 set |
| 14 | Electrical system | 1 set |
Usually, you just provide some basic parameters, and then we can offer a slitting line machine for you
(1) Material of the steel coil
(2) The thickness of the sheet
(3) The width the steel coil
(4) The original coil Inner diameter
(5) The original coil outer diameter
(6) The maximum weight of one original coil
(7) The maximum slitting strips quantity
(8) The output coil Inner diameter
(9) The output coil outer diameter
(10) The maximum weight of output coil
(11) Slitting machine speed requirements
(12)Production output, daily output / monthly output
Machine picture
Package&Delivery
We will book cabins before delivery, and arrange land transportation before customs declaration. After all the parts were packed into the container, we repaired all parts of the machine and reminded the driver to pay attention to safety and our salespeople will always pay attention to logistics.
Customers visit
Our showroom
FAQ
1. Q: What's the warranty period? (24hours online)
12 months warranty period, starting from the date of the successful installation and commissioning of the equipment at the Buyer’s Installation site. During which all parts damaged because of quality problem will be changed for free.
2. Q: Do you have installation and commissioning service?
A.If buyers come to our factory to inspect, the training to install and operate is provided face to face. If not, manual and video is provided to show how to install and operate.
B. If buyer need we will send technician to buyer site to do installation and commissioning and training.
C.installation and commissioning cost: One engineer will visit Buyer’s workshop for installing, commission and training. The buyer has to pay USD100/per day and visa fee, air tickets fee, accommodation and food, necessary communication, etc.
(Normally ,It takes about a week to install )
3. Q: What’s your after-sales service ?
We provide 24-hour online service for our customers.
And we are happy to give advice and also have skilled technicians available to maintain the machine overseas to customers’ workshop if needed.
4. Q: What's your delivery time ?
Normally we can finish production and testing within 45-70 days after receiving deposit. Some machines in stock, can be delivered at any time
5. Q: You are trading company or factory?
We are Manufacturer, and we export our machine by ourselves.
6. Q: Do you provide customized machine?
Sure, we can design the machine according to the requirement and profile drawing you provide. Our engineers can offer the best professional solution to our worldwide clients.
7. Q: How to visit your factory?
We are in jiangyin city,belongs to Jiangsu province,
near Shanghai. If you arrive at Shanghai Airport,we can pick you up
It is 160 kilometers from Pudong Airport, about 3 hours.
It's 110 kilometers from Hongqiao airport, about 2 hours; It's 125 kilometers from downtown Shanghai about two and a half hours.
It is very convenient.Please let me know if you have booked the tickets
so that I can prepare and book a hotel for you,we will arrange for car to pick you up.
By high speed train from Shanghai to East Wuxi (Wuxi Dong station), half an hour.
8. Q: How to place order ?
Inquiry---confirm the profile drawings and technical specification and price----confirm the PI---arrange the deposit or L/C---start production-- do inspection--- Shipment
9. What are your terms of payment ?
First payment: 30 % by T/T, second payment: 70% by T/T, after the successful inspection at seller’s workshop, and before delivery.
