34293DA/34478 Skf Taper Roller Bearing High Carbon Chromium Bearing Steel

34293DA/34478 Taper Roller Bearing

Product Introduction:

Tapered roller bearings have specially designed raceways and asymmetrical rollers. The bearings can accommodate axial loads acting in one direction and simultaneously acting radial loads. The load is transmitted between the raceways via the rollers at an angle to the bearing axis, while the flange guides the rollers.

Taper roller bearings contain four main components:the inner rings,the outer ring(or cup),the tapered rolling elements,and the roller retainer(or cage).These bearings are specially engineered with tapered angles to accommodate both radial loads and thrust in housings and on rotating shaft assemblies.The sheerer the angel of the cup taper,the higher the thrust load tolerance of the taper roller bearing.

Features of Taper Roller Bearing

The roller and the raceway are in line contact or underline contact.

Large radial load, carrying capacity and friction coefficient is small.

Suitable for high speed runing equipment.

inner ring and outer ring can be separated, easy to install and remove.

Type:34293/34478Type :combination bearing
Inside diameter :74.8 (mm)Diameter :120 (mm)
Thickness:114 (mm)Weight :2.6 (kg)
Cage and material :J steel plate stampingPerformance :high speed
Use :engineering mechanical Rolling body column number :single row
Groove type:racewaySample or spot:spot
Bearing material :high carbon chromium bearing steel (full multiplying type) (GCr15)

NSK H2348 ,NSK SD3152S/SD3152SG ,NSK 5310 ,NSK 644/632 ,NSK 7918C ,NSK H3068 ,NSK LM29748/LM