Hardware Custom Sheet Metal Fabrication Parts For Box Enclosure

Custom Precision Hardware Sheet Metal Fabrication For Box Enclosure

Sheet metal fabrication is actually the processing of metal products. It is more about transforming metal sheets so that they can be used in many different places. Its processing methods include many, including stamping, cutting, cutting and other methods to change the properties and shape of the metal. The use of this processing technology can bring a lot of convenience to people's lives, and also promote the development of China's machinery manufacturing industry. For the sheet metal processing industry, it can be applied in many insights.

Rules for stainless steel sheets fabrication:

1. Select blanking, after completion, enter the next process, and process different stainless steel workpieces into corresponding processes as needed;

2. When a bend is based on the scale and thickness of the stainless steel material on the drawing, the key to preventing the product from colliding and causing deformation is the key to the selection (in the same product, different types of upper and lower dies may be used) to determine the thickness of the sheet;

3. When we press riveting, we should consider that the stud height is the same, select the same mold, and then adjust the pressure of the press to ensure that the stud and the surface of the workpiece are neat to prevent the stud from being pressed into or over the surface of the workpiece and forming artifact. Welding includes argon arc welding, spot welding, carbon dioxide repair welding, technical welding, etc. Spot welding first considers the welding direction of the workpiece, and considers the position of the stainless steel plate during mass production to ensure spot welding accuracy.

4. In order to weld firmly, if bumped workpieces are welded, the bumps can be evenly welded before and on the plane to ensure that the common contact points are heated, and the welding direction can also be determined. It should also be welded, and the pre-pressure time, pressure holding time, Maintenance time and rest time to ensure that the workpiece can be set on site;

Product parameters: