Nanpi Haoxinyuan Technology Co., Ltd. |
Verified Suppliers
|
|
Cooper Battery Starter Cable Wiring Lead Power Positive
Removal steps of car starter battery cable
1. Confirm the location of the battery: Generally, the battery of
the vehicle is distributed in the following locations: near the
spare tire in the trunk, under the driver's seat, under the
passenger seat, and on the left front or right front of the engine
compartment.
2. Prepare disassembly tools: generally prepare a No. 10 casing
wrench and a flat-blade screwdriver. First, use a wrench to loosen
the screw on the negative pole of the battery. For a newly
installed battery or a new car, grab the negative pole of the
battery and twist it left and right. It can be removed with a few
clicks, and the old car needs to be removed by prying up a few
times at the opening of the negative wire with a flat-blade
screwdriver.
3. Wrap the negative electrode of the battery well: avoid the
negative electrode line returning to its original position due to
internal stress, and misconnecting the negative electrode of the
battery will cause unnecessary damage to the vehicle. At the end of
the installation, you can install it in reverse order.
Product parameters:
products name | Cooper Battery Starter Cable Wiring Lead Power Positive |
Material | Wire: high temperature resistant wire or irradiated wire [QVR-105℃,
AEX(F), STX, SGX]; Bellows: Nylon (PA); Dust jacket: fluorine rubber, EPDM or neoprene; Tape: cloth base or high temperature resistant tape (gray); Terminals: matt tin plated; battery clips - copper tin plated or zinc, lead-tin alloy; Heat shrinkable tube: cross-linked polyolefin (PE), continuous use temperature -55~125℃. |
Connector | All kinds of connectors are available |
Color | All colors are available |
MOQ | Welcome Small quantity, even 100pcs |
Standards | Under IPC/WHMA-620 Standards |
Quality | 100% tested before delivery, Never use Fake materials |