Product Description
Stainless steel abrasive belt flat sheet grinding sanding machine
is designed for grinding, polishing and satin finishing various
metal parts, like metal plates, profiles, square or rectangular
section tubes, tools, iron bases, door plates, locks, etc. It also
can grinding many kinds of materials like: stainless steel ,copper,
aluminum, brass alloy etc. The features of this plate grinding
sanding machine as below:
- can be supplied with several belt grinding heads from one head to
six heads (depending on the grinding effect you required)
- wet type or dry type working condition
- can be installed abrasive wheel to get satin grinding or hairline
finishing
- continuously working time more than 10 years and safety operation
- less Maintenance rate than common machine
- because special design, So less deformation rate after polishing
(almost less than 2%)
Specification
Stainless steel abrasive belt flat sheet grinding sanding machine |
---|
Model | JZ-L6011-B |
Main motor | 5.5kw *4 |
Conveyor motor | 0.75kw |
Worktable size | 150mm( can be customized width according to you needed) |
Input speed | 0–8 m/min |
Spindle speed | 1440 r/min |
Belt size | 2100 mm*150 mm |
Voltage | 380 V,50/60 HZ,3 Phase |
Mechanical operation | PLC control |
Working condition | wet type or dry type |
Remark | with dust cover |
Detail image
Instructions of operating Stainless steel abrasive belt flat plate
grinding sanding machine
- Step one, turn on the power switch to see power indicator whether
there is electricity.
- Step two, shake the hand wheel lift table, to lift the working
table to a certain height, the space around the workpiece is higher
than 2 MM.
- Step three, press the Start button to start the belt conveyor,
adjust the distance between the workpiece and the belt.
- Step four, start pump and spindle switch, so that grinding is
processing between the belt and the workpiece.
- Step five, watch the workpiece surface quality meets the
requirements, if not, please use the hand wheel to move slowly
adjusting the distance between the workpiece and the sanding belt.
- Step six, press the emergency stop button if there is something
wrong in the work
- Step seven, after work, shut the power, clean machinery and fill
lubrication to the regularly moving parts
Consumables usage