HEBEI PENGXIN PIPELINE EQUIPMENT GROUP CO.,LTD |
|
API 5L Gr.X60 PSL2 LSAW Carbon Steel Pipe, 30 Inch, SCH STD DRL, Painting
Overview
Carbon steel pipe can be divided into seamless steel pipe, straight
seam steel pipe, spiral steel pipe, high frequency welded steel
pipe and so on. The raw material of rolling seamless carbon steel
pipe is round tube billet. The round tube embryo must be cut by
cutting machine to process the billet with a growth degree of about
1 meter, and sent to the furnace by conveyor belt for heating. The
billet is heated into the furnace at a temperature of about 1200
degrees Celsius. The fuel is hydrogen or acetylene. Furnace
temperature control is a key problem. After the round tube billet
is out of the oven, it must pass through the pressure perforation
machine to carry on the empty.
Steel pipe or all kinds of conventional weapons indispensable
materials, barrel, barrel and so on are made of steel pipe. The
steel pipe can be divided into round pipe and special-shaped pipe
according to the shape of cross-sectional area. Because the
circular area is the largest under the condition of equal
circumference, more fluid can be transported by circular pipe. In
addition, the ring section under internal or external radial
pressure, the force is more uniform, therefore, most of the steel
pipe is a circular pipe.
Making ring parts with steel pipe can improve the utilization ratio
of materials, simplify the manufacturing process, save materials
and processing hours, such as rolling bearing ring, Jack sleeve,
etc. At present, steel pipe has been widely used to manufacture.
It is divided into 10# seamless steel pipe ,20# seamless steel pipe
,4# seamless steel pipe and so on.
Folding Material Factors
(1) The importance of structure The importance of heavy-duty
industrial building structures, long-span structures, high-rise or
super-high-rise civil building structures or structures, etc.,
should consider the selection of seamless steel pipes of good
quality, and for general industrial and civil building structures,
the selection of seamless steel pipes of ordinary quality can be
made according to the nature of work.
(2) Seamless steel pipes with good comprehensive performance should
be used for structures directly bearing dynamic loads and those in
strong seismic zones under load conditions, while seamless steel
pipes with lower prices can be used for structures generally
bearing static loads.
(3) The welding process of the connection method results in welding
deformation, welding stress and other welding defects, and there is
a risk of cracks or brittle fracture of the structure. Therefore,
the welding structure should be strict with the material
requirements.
(4) The temperature and environment environment of the structure,
seamless steel pipe is easy to be cold and brittle at low
temperature, so the structure working at low temperature,
especially the welding structure, should choose the sedative steel
with good resistance to low temperature brittle fracture. In
addition, Taiyuan seamless steel pipe with open-air structure is
easy to produce aging, and seamless steel pipe with harmful medium
is easy to corrode, fatigue and fracture, so different materials
should be selected differently.
(5) Too seamless steel pipe thickness, thin seamless steel pipe roll rolling times, rolling compression ratio is large, the thickness of seamless steel pipe compression ratio is small, so the thickness of precision steel pipe not only less strength, but also poor plasticity, impact toughness and welding performance. Therefore, the welding structure with large thickness should adopt seamless steel pipe with better material
Chinese name | 碳钢无缝钢管 | kind | 10#,20#,45# seamless steel pipe |
act on | conveyance fluid | point out | Selected by Environment and Use |
characteristic | Hollow section, no seams around |