|
[China]
Trade Verify
Address: 500 M North of Taicheng Industrial Area, Anping County,Hengshui City,Hebei Province.China.
Contact name:Jack Zhang
Anping Dixun Wire Mesh Products Co., Ltd |
|
Verified Suppliers
|
|
|
Water Cooling Welding Transformer Villa Fence Welded Fence Mesh Welding Machine
Welded Fence Mesh Welding Machine Introduction:
The Welded Fence Mesh Welding Machine adopt air cylinder to control the welding pressure. The Welded Fence Mesh Welding Machine use 30mm thickness iron plate to make the body structure. Ensure the machine working stable. The Welded Fence Mesh Welding Machine can produce wire diameter 656mm and 868mm double wire.This two wire diameters are widely used in the machine. Mesh size 200*50mm. Length of mesh max 3000mm.The welding point is very strong and the surface is plain and beautiful.
Welded Fence Mesh Welding Machine Features:
1. We are best manufacturer of welded fence mesh welding machine in China. We are direct factory in this field for many years.
2. This is our latest design machine to make 3d double wire fence mesh panel.
3. The Welded Fence Mesh Welding Machine adopt Mitsubishi PLC, Mitsubishi servo drivers, Schneider
relays etc.
4. The line wires and cross wires should be pre-straightened and
pre-cut, then put into wire into the dies by the storage hopper
automatically
5. There are two storage hopper, One is for the line wire storage
hopper, another is for cross wire storage hopper. Firstly. Put the
line wire into the storage hopper. The storage hopper drop the line
wire into the die automatically. Then put the cross wire into the
storgae hopper. The cross wire storage hopper drop the wire into
the dies automatically. Finally. the line wire storage hopper drop
the line wire to the dies automatically again. The cycle chain will
send the line wire and cross wire to the welding machine. The
welding machine start to weld one by one. The pulling mesh car to
pull out the fence mesh panel automatically.
6. The upper welding electrodes and lower welding electrodes are
both controlled by SMC air cylinders. The welding pressure are firm
and even.
7. The Steel Wire Fence Mesh Welding Machine suitable for material; galvanized wire, round bar, stainless steel wire.
8. The Welded Fence Mesh Welding Machine need power transformer at least 300KVA to running. We could make the machine according to your local industrial voltage.
Welded Fence Mesh Welding Machine Technical Parameters:
| Model | DX-GWC-2000C | DX-GWC-2500C | DX-GWC-3000C |
| Wire diameter | 6+5+6mm,8+6+8mm | 6+5+6mm,8+6+8mm | 6+5+6mm,8+6+8mm |
| Line wire space | 200mm or as your required | 200mm or as your required | 200mm or as your required |
| Cross wire space | 50mm,100mm,150mm | 50mm,100mm,150mm | 50mm,100mm,150mm |
| Mesh width | 2000mm | 2500mm | 3000mm |
| Mesh length | 3000mm | 3000mm | 3000mm |
| Welding electrodes | 11PCS | 14PCS | 16PCS |
| Welding transformer | 160KVA*4PCS | 160KVA*5PCS | 160KVA*8PCS |
| Welding speed | 30 times per min | 30 times per min | 30 times per min |
| Line wire feeding | pre-cut | pre-cut | pre-cut |
| Cross wire feeding | pre-cut | pre-cut | pre-cut |
Welded Fence Mesh Welding Machine Applications:
The finished product 3D double wire fence mesh panel is widely used in villa fence,park fence,road fence.
Welded Fence Mesh Welding Machine Packing:
Welded Fence Mesh Welding Machine Photos:
