High Working Temperature Plastic Material PTFE Mesh Pad Mist Eliminator

High Working Temperature Plastic Material PTFE Mesh Pad Mist Eliminator
 
 
1. High temperature PTFE mesh pad mist eliminator features,
 
Polytetrafluoroethylene (PTFE) is a kind of material with the characteristics of acid and alkali resistance and resistance to various organic solvents, which is almost insoluble in all solvents. At the same time, polytetrafluoroethylene has the characteristics of high temperature resistance, and its friction coefficient is very low, so it can be used for lubrication, and also become an ideal coating for easy cleaning of the inner layer of water pipes.
 
PTFE is a kind of high molecular compound which is polymerized from tetrafluoroethylene. Its structure formula is - [- cf2-cf2 -] n- With excellent chemical stability and corrosion resistance, it is one of the best materials with corrosion resistance in the world. Besides molten alkali metal, chlorine trifluoride, chlorine pentafluoride and liquid fluorine, it is also resistant to all other chemicals and can not change when boiling in aqua regia. It is widely used in various occasions requiring acid-base resistance and organic solvents. It has tightness, high lubrication, no sticky, electrical insulation, good aging resistance and excellent temperature resistance. It can work long term from 250℃ to -180℃ degrees. Polytetrafluoroethylene itself is not toxic to humans. The operating temperature is - 190 ~ 250 ℃, and sudden cooling and heating, or alternate operation of cooling and heating is allowed. The pressure is - 0.1-6.4mpa.
 
2. Where are mesh pad mist eliminator units used?
 

• Knockout drums and separators – save on capital costs by decreasing vessel size-recover costly fatty acids from stream-reduce compressor maintenance by preventing scale build-up.

• Absorbers – reduce overhead losses of glycols in dehydrators to no more than 0.1 gal/MMSCF natural gas-cut losses of absorption oil and amines in CO2 systems.

• Scrubbers – reduce chemical discharges from Kraft mill smelt dissolver tank to less than 0.11 kg/dry ton (0.25 lb/dry ton) of pulp-improve scrubber efficiency by removing particulates carried in entrained liquids.

• Distillation columns – improve product purities and increase throughput capacities for petrochemicals, organic intermediates, fine chemicals.

• Evaporators – prevent carryover loss of valuable products, keep condensate TDS <10 ppm for highest quality boiler feed water-clean up vacuum ejector stream discharge-lower maintenance in vapor re-compression systems.

• High pressure steam systems – provide dry steam- cut TDS to <10 ppb in condensate-eliminate build-up on turbine blades.

• Refinery towers – increase throughput capacity-take deeper cuts for greater product yields – prolong catalyst life in downstream cracking and reforming units by reducing carbon and metals in side draws-use lower grade crudes.

 
3. High temperature PTFE mesh pad mist eliminator Inquiry Table if Calculation Suggestions and Service are needed
 

Please pay attention to the Unit when refering to this sheet.
 
Hualai Team is ready to help with what you need. Welcome your inquiry to Hualai!