Home Companies Beijing Silk Road Enterprise Management Services Co.,LTD

Flue Gas Desulphurization Tower Ridge Vane Pack Demister Self Cleaning

Beijing Silk Road Enterprise Management Services Co.,LTD

Contact Us

[China] country

Trade Verify

Contact name:

Inquir Now

Beijing Silk Road Enterprise Management Services Co.,LTD

Verified Suppliers
  • Trust
    Seal
  • Verified
    Supplier
  • Credit
    Check
  • Capability
    Assessment

Flue Gas Desulphurization Tower Ridge Vane Pack Demister Self Cleaning

Country/Region china
City & Province hengshui hebei
Categories Rare Earth & Products
InquireNow

Product Details

 

Flue Gas Desulphurization Tower Ridge Vane Pack Demister Self Cleaning

 

 

Ridge type vane pack demister consists of two layers of vane packs and three layers of washing water. The gas stream flow through the first and second vane packs to eliminate the target-size mist. The standard module of the first stage vane pack demister is with pitch of vane 30mm, and the standard module of the second stage vane pack demister is with pitch of vane 25mm. The vane plates are fixed by positioning rods (both the upper part and the lower part are fixed). The positioning rods and each chevron plate have corresponding round holes, which are penetrated vertically with round rods, and the chevron plates and positioning rods are penetrated into the fastener layer by layer. Then it is welded with the blade to ensure that the positioning rod and the round rod will not fall off, and at the same time, the bearing capacity of the vane pack demister is increased.

 

Technical characteristics of ridge vane pack demister:

 

Unique design, without dead angle of demisting in the whole tower, triangle installation form, good stability, unique angle design. Hook on the chevron plate is an option, to gain droplet collection acceleration, and improve separation efficiency.

 

Technical Parameters of ridge type vane pack mist eliminator:

 

Mist content at exit≤75 mg/Nm3
Eliminated droplet size≥26 um
Pressure drop≤120 Pa
Flue gas velocity2.8 - 7.8 m/s (empty tower gas velocity)

 

Vane Plate Parameters for Ridge Demister:

 

1. Height of the first stage vane plate: 170mm,

         plate thickness: 3mm; pitch of vane 30mm;

         Vane plate shape: streamline 2-channel.

2. Height of the first stage vane plate: 170mm,

         plate thickness: 3mm; pitch of vane 25mm;

         Vane plate shape: streamline 2-channel; hook in the middle of plate is an option.

3. Molding process: extrusion molding

 

Flue gas desulphurization industry is becoming more and more important as we pay more attention and effort to the environmental protection all over the world. In Hualai we produce vane pack demister mist eliminators for years, we are expecting to make more contributions to this global action. Welcome your contact anytime!

 

Hot Products

Distillation Column And Stainless Steel Material Structured Packing Metal structured packing refers ...
Wire mesh demister used in knock out drum mist eliminator specification Wire mesh demister used in ...
Wire mesh demister pad made for low pressure rectifying column Wire mesh demister pad made for low ...
CO2 Absorbers use Hualai wire mesh demister standard specification Wire Mesh Demister for Absorbers ...
50 Kg / M3 Wire Mesh Demister Hualai wire mesh pad demister designed to be used in Lubricant ...
Hualai wire mesh pad demister is mostly used in distilling equipment Wire Mesh Demister for ...