3.2m Copper Mesh For Distilling Knitted Style Rohs Certificated

Copper mesh is also ideal for distilling.,We recommend using a pound of copper mesh inside your still column. Copper will react with the hydrogen sulfide and isobutyl mercaptan vapors and form copper sulfate.This copper sulfate then bonds with fatty acids and oils to eliminate skunky and rotten egg smells, creating a better tasting for final product

Copper Mesh For Distilling specifications

Copper Mesh For Distilling Application

1. Copper mesh for screw cleaning.

Steps to clean the screws and barrels efficiently with copper gauze and grease.

Step 1: Use a purging compound to clean the extruder. Then use small ball of copper mesh with some silicone grease on it to clean the die face. Also please clean the valve when it is still hot.

Step 2: Remove the die from the extruder head. It is best to clean it by silicone coated copper gauze forced through the die with a wooden dowel.

Step 3: Pull back and forth the copper gauze to complete the cleaning after it pass through the die.

Step 4: Make sure that no residual trace of adhered plastic is left, nor causing a scratch on the metal surface, so the die is thoroughly clean.

Step 5: Remove the hot screw partly, wrap the copper gauze with silicone coating 3 times around the screw, pull back and forth to do the cleaning.

Step 6: Keep sliding the copper gauze when removing the screw out of barrel slowly, until the screw is clean. It takes only 5 minutes for step 5 and 6 operations.

Step 7: Wrap copper mesh at end of a long rod and pass it through the barrel. Then, chuck the rod into power drill, insert fresh gauze and pass back and forth through barrel until clean.

Step 8: Please do all the operations with silicone grease coated copper mesh. Now all parts is clean and ready for reassemble

Copper Mesh For Distilling advantages