Active Member
|
[China]
Address: Wire Mesh Industry Zone, Anping County,Hengshui City,Hebei Province.China
Contact name:
ANPING MOLONGGANG SPOT WELDING EQUIPMENT COMPANY LIMITED |
|
|
High Speed Welded Mesh Spot Welding Machine For 1/2 inch 1 inch 2 inches
Machine Description
1. This machine is fully automatic to feed wires, weld mesh, cut edge and roll mesh.
2. The raw material is applicable for low-carbon steel wire, galvanizing wire and stainless steel wire.
3. It has advantages of reasonable design, low noise, stable working, easier operation etc.
4. The mesh size is precise and can be set according to customers’ requirements.
5. It adopts sealed &water cooling welding transformers, the scoria can not easily goes in.
Technical Parameters
| Model | MLG-DNW-1 | MLG-DNW-2 | MLG-DNW-3 |
| Wire diameter | 0.45-0.65mm | 0.65-1.2/1.8mm | 1.0-2.2mm |
| Aperture/pitch | 1/4”-1/2” | 1/2”-4” | 1”-4” |
| Mesh width | 3 feet, 4feet | 4 feet, 5 feet | 4 feet, 5 feet, 6 feet, 7feet |
| Motor | 2.2kw 1.5kw | 2.2kw 1.5kw | 2.2kw;4.0kw |
| Welding speed | Max. 75 rows/min | Max. 120 rows/min | Max. 80 rows/min |
| Measurement | 2.3*1.3*1.4m | 2.5/2.9*1.3*1.4m | 2.5/2.9*1.3*1.4m |
| Weight | 1.5T | 2T, 2.5T | 2T, 2.5T, 3T, 3.5T |
| Transformers | 50kva*3 | 60kva*4;60kva*5 | 60kva*4/5/6/7 |
After-sales Service
1. Guarantee time: one year since machine was at buyer's factory
but within 18 months against B/L date.
2. Within guarantee time, if any components are broken under normal
condition, we can change for free.
3. We can send our best technician to buyer’s factory for
installation, debugging and training.
4. Complete installation instructions, circuit diagram, manual
operations and machine layout.
5. Timely reply for your machine questions.
