Fully Automatic Electric Welded Wire Mesh Machine For Mining / Transportation

Full Automatic Electric Welded Wire Netting Machine / Wire Mesh Welding Machine In Roll

Machine Description

1. This machine is fully automatic to feed wires, weld mesh, cut edge and roll mesh.

2. The raw material is applicable for low-carbon steel wire, galvanizing wire and stainless steel wire.

3. It has advantages of reasonable design, low noise, stable working, easier operation etc.

4. The mesh size is precise and can be set according to customers’ requirements.

5.  It adopts sealed &water cooling welding transformers, the scoria can not easily goes in.

Technical Parameters

Applications;

1. The large part of the construction industry small wire welding network is used for the wall insulation and cracking engineering, the internal (outer) wall plaster hanging net, the specification adopts the wire diameter of 0.3-0.9mm, the mesh hole is 1/2, 3/4, 1 and 2 inches.Inner wall insulation welding wire mesh: 0.3-0.5mm, wire diameter of external wall insulation: 0.5-0.7mm.

2. Breeding industry fox, mink, chicken and duck pigeon, etc. are used in the enclosure, and use 2mm silk diameter, 1 inch mesh, special specification can be customized.

3. The enclosure of agricultural crops, with a coil of electric welding net, the inside of the corn, popularly known as the corn net, the ventilation performance is good, saving the floor area.The silk diameter is thicker.

4, Industry is used for filtering and separating.

5. Highway and roadways of the transportation industry, such as plastic welding network, etc.The steel structure industry mainly sets off the insulation cotton, which is used for the roof insulation, and is used for 1, 2 inch mesh, and the wire diameter is about 1mm