ANPING MOLONGGANG SPOT WELDING EQUIPMENT COMPANY LIMITED |
|
Automatic 5--12mm Concrete Reinforced Steel Bar Mesh Welding Machine
Main features:
1.The control system adopts synchronous CNC technology, Mitsubishi
PLC program. It is easy and convenient to operate with the touching
screen.
2. The fallen wire system sends weft wires one by one automatically
instead of putting wefts wires by manual work, increasing
productivity.
3. The sending mesh system controlled by computer can
make—Adjustable distance of line wire that allows different opening
size between the line wire, when input the distance of cross wire
to computer, any character can be reach. Welding aperture can
adjust randomly within range.
4. The main engine adopts imported and famous pneumatic components,
making the service life long.
5. The welding wire is accurate and the welding points are firm for
the big pressure.
6. This machine equips typical and efficient transformer, which
gearless adjusted, enlarging the welding range.
7. Mesh drawing system is controlled by servo-motor that adopts
elastic tension and opening positioning mesh, which improves the
precision of mesh opening size.
8, Transformer:125KVA*12(24welding heads) ——every two welding heads
need a water cooling transformer
9, Wire feeding way:The line wires and cross wires should be
pre-straightened and pre-cut, then be put by manual work.
10, Mesh pulling method:controlled by servo-motor.
11, Material:Suitable for low carbon iron wire, deformed bar, round bar black annealed wire or galvanized (cold galvanized, hot galvanized) processing
12, Product pulling system the mesh is pulled by gearing system below the mesh.
Technical details
Wire diameter | 5--12mm | Line wire form | pre-cut wire |
Weft wire distance | 100mm--300mm (adjustable) | Weft wire form | pre-cut wire |
Line wire distance | 100mm--300mm (adjustable) | Rated voltage | 380V/50HZ 3 phase |
Mesh width | 2500mm | Water cooling Transformer power | 125KVA X 12 |
Welding speed | 40-- 60times/min | Overall dimension | 11X 3.4X 2.4M |
Welding spot heads. | 24 | Max. mesh length | 6m |
Total weight | 7.5T | Motor | 11KW |