Active Member
|
[China]
Address: Area 4,8#, no.5 Jingyi Road, East District of Industrial Zone, Anping County
Contact name:WU
Anping County Anhesheng Hardware Mesh Products Co., Ltd. |
|
|
125X 250X Plastic Structured Packing Polypropylene For Sewage Treatment
Plastic Structured Packing Classification
Plastic perforated plate packing has similar structure with metal structured packing, which can be divided into plate packings and wire gauze packings.
The materials used for the filler are polypropylene, polyethylene, polyvinyl chloride and reinforced polypropylene.
The surface of the packing is pressed with a special stripe, and the selection of the packing is based on the operating conditions. The corrugated plate is an improved corrugated plate. The corrugated plate shall be installed vertically parallel to the longitudinal axis of the container. The corrugated direction on the plate is 30°-60° with the length direction of the plate. The ripples on the same corrugated plate are parallel to each other; The corrugations of the adjacent plates form an intersection.
When the fluid flows in this part, it moves up and down, which helps to coalesce, float up or settle the dispersed phase droplets, and greatly improves the processing capacity and separation efficiency.
Plastic Structured Packing Application
It is widely used in the operation of absorption and decomposition
absorption devices, especially in the production process with heavy
liquid load and high operating pressure, such as (HCl) and (H2SO4)
production, degassing CO2 and H2S from natural gas, drying
chlorine, liquid production, waste gas purification and
decomposition absorption deoxygenation devices.
Plastic Structured Packing Specification
Structured packaging has two slants, "X" and "Y". The "Y" type
packing, with an inclination of approximately 45º to the horizontal
axis, is the most widely used packing. They offer higher filtration
efficiency than the "X" type, but at the cost of higher pressure
drop/lower capacity. The "X" type packing has an inclination of 60°
to the horizontal axis and is suitable for high volume and low
pressure drop applications.
| Packing type | Theoretical Plate Number(piece/m) | Surface area (m²/m³) | Void Volume (m³) | Bulk Density (kg/m³) | Liquid Loading(m³/m²·h |
| 125Y | 1-2 | 125 | 0.985 | 37.5 | 0.2-100 |
| 250Y | 2-2.5 | 250 | 0.97 | 75 | 0.2-100 |
| 350Y | 3.5-4 | 350 | 0.95 | 105 | 0.2-100 |
| 500Y | 4-4.5 | 500 | 0.93 | 150 | 0.2-100 |
| 125X | 0.8-1.9 | 125 | 0.985 | 37.5 | 0.2-100 |
| 250X | 1.5-2 | 250 | 0.97 | 75 | 0.2-100 |
| 350X | 2.3-2.8 | 350 | 0.958 | 105 | 0.2-100 |
| 500X | 2.8-3.2 | 500 | 0.93 | 150 | 0.2-100 |
Anping County Hardware Mesh Products Co., Ltd. is located in Anping
County, Hebei Province, known as the "Hometown of Chinese Wire
Mesh". The company is a dedicated manufacturer of wire mesh
demisters. The company has more than 90 sets of knitted mesh
equipment. The wire mesh demister is the main product of our
company. Most of our employees are operation, maintenance, and
installation personnel with practical experience, who can provide
customers with the required engineering consultation and
installation of tank filtration. solution.Nearly 20 years of
experience in the production of mist eliminator mats, knitted wire
mesh, and other packaging materials.
We have ISO9001 certification and a strict quality control system
in the QC department of the enterprise.
We claim that all mist eliminator pads our customers receive are
qualified and perform perfectly. We have different specifications.
The filtration fineness can reach 3μm~5μm. In addition to standard
and popular sizes, we can also customize specific applications
according to customer needs.
During the company's development, through continuous on-the-spot
inspections, personal exchanges and cooperation with customers, and
comprehensive discounts and technical support, we have won strong
customer support and praise.
The company's performance has maintained an annual output value
growth rate of 30-40. Our employees pursue the policy of
"enterprising, truth-seeking, rigorous and united", continue to
develop and innovate, take technology as the core, and
wholeheartedly provide you with cost-effective products,
high-quality engineering design, and services.
Welcome customer consultation and I sincerely look forward to
cooperating with you!
Q: If I want to know the price, what information should I give you?
A: Material, size, application/purpose, quantity, payment term FOB
or CIF, packaging term, etc.
Q: Is the size fixed?
A: No, except for table size. Can be customized according to
demand!
Q: Can I negotiate the price?
A: Yes, we will give discounts according to the quantity and type
of products you need.
Q: How long is the delivery time?
A: It usually takes 7-10 working days; it depends on the specific
quantity and type.
