|
[China]
Trade Verify
Address: 101-1101, Building 17, Dianda Guyuan Industrial Park, Mashantou Community, Matan Street, Guangming District, Shenzhen
Contact name:June Zhao
Shenzhen Merrytek Technology Co., Ltd. |
|
Verified Suppliers
|
|
|
IP20 Surface Mounted infrared pir motion sensor detector for
corridor with max. 6m mounting height
1. Features
1) Using PIR infrared pyroelectric sensing technology
2) Accurate ON/OFF output
3) Daylight sensor detection is available
4) Detection area, hold time, and daylight threshold can be set by
remote/DIP switch
5) Max detection range: 5-8m in diameter
6) Max loading capacity:800w resistive loading and 400w inductive
loading (LED)
7) Corridors, hallway, and toilet motion detection is highly
recommended
8) Ultra-thin size, integrated with the ceiling after ceiling
installation
2. Parameters
| Input/Output | Input voltage | 100-240V AC |
| Rated voltage | 220V AC | |
| Working current | 20mA max | |
| Power consumption | ≤0.2W @220V DC | |
| Output signal | ON/OFF | |
| Load capacity | 800w resistive loading or 400w inductive loading | |
| Sensor parameter | Function | PIR motion detection+ daylight sensor |
| Detection Area | DIP or remote setting: 100%/75%/50%/25% | |
| Hold Time | DIP: 5s/1min/3min/5min/10min/20min/30min | |
| Daylight Sensor | DIP: 5Lux/50Lux/100Lux/150Lux/Disable | |
| Radius detection range(based on 100% sensitivity) | 2.5-4m based on 3m mounting height | |
| Remote control | Available | |
| Mounting height | 2.5-6m typical value:3m | |
| Application environment | Installation | Surface Mounted |
| Working temperature | 0℃...+35℃ | |
| Storage temperature | -40℃~+80℃ | |
| Certificate Standard | Certificate | Compliant to CE |
| Environmental requirements | Compliant to RoHS | |
| IP rating | IP20 | |
| “N/A” means not available | ||
3. Dimension
4. Wiring Diagram & Function
5. Start Process & Initialization
When powered on, the sensor indicator will turn off after flashing
for 10S and will not detect a moving signal during this time. After
10S, you can use our MH10 remote or dip switch to adjust the
detection area, hold time, and daylight sensor.
6. Factory Settings
Detection Area: 100% Hold Time: 5s Daylight Sensor: Disable
7. Detection radiation
8. DIP Settings
Detection Area
| 1 | 2 | |
| 100% | ON | ON |
| 75% | - | ON |
| 50% | ON | - |
| 25% | - | - |
Hold Time
| 3 | 4 | 5 | 6 | ||
| Ⅰ | ON | ON | ON | ON | 5S |
| Ⅱ | ON | - | ON | ON | 1min |
| Ⅲ | ON | ON | - | ON | 3min |
| Ⅳ | ON | ON | ON | - | 5min |
| Ⅴ | ON | ON | - | - | 10min |
| Ⅵ | - | - | ON | ON | 20min |
| Ⅶ | - | - | - | - | 30min |
Daylight Sensor
| 7 | 8 | 9 | ||
| Ⅰ | ON | ON | ON | 5Lux |
| Ⅱ | - | ON | ON | 50Lux |
| III | ON | - | ON | 100Lux |
| Ⅳ | ON | ON | - | 150Lux |
| Ⅴ | - | - | - | Disable* |
**Once the daylight sensor is set as
Disable, our motion sensor will detect human movement regardless of
the environment lux
10. Remote Control
