Higbay application 15m mouting height DC Motion Sensor with zhaga
book 18 connector
【Product Feature】
- Low impedance planar antenna; High-gain
- Thimble interface; Zhaga interface
- 12 meters maximum installation height, suitable for most warehouses
- Mini Microwave motion detector for High Bay Lights.
- Junction box free design, IP65 waterproof
- Ultra-low RF power output, harmless to human health
- Sensor parameters can be adjusted by remote
- The sensing range is adjustable (high sense/low sense) , suitable
for different installation environments
- Not affected by temperature, humidity, noise, airflow, dust, light
etc.
- Automatic swing structure , easy to plug and play.
MC079D 99 A
MC079D 99 Z
【Parameters】
Input |
Rated voltage | 11-13VDC |
Working current | <30mA |
Ripple voltage | <100mVp-p |
output |
Output signal | 0 -10VDC dimming signal |
Sensor parameters |
Working frequency | 5.8GHz ±75MHz, ISM band |
Transmitting power | 3mW Max. |
Daylight Sensor | 5lux/15Lux/30Lux/50Lux/100lux/150lux/Disable |
Daylight priority | ON | 5Lux/15Lux/30Lux/50Lux | 100Lux | 150Lux |
OFF | 150Lux | 200Lux | 300Lux |
Dimming level | 10%(1.4-1.6V) 20%(1.9-2.1V) 30%(2.9-3.1V) 50% (4.9-5.1V) |
Detection range (radius) | Ceiling installation 12m high: 0.3m/s≥4m, 1m/s≥3m; |
Installation height | 12m (15m Max ) |
3db beam angle | 82°@XZ plane |
95°@YZ plane |
Environment |
Working temperature | -35~60℃ |
Storage temperature | -40℃~80℃, humidity ≤85% (non-condensing) |
Certification standards |
Certified | CE |
Environmental requirements | Comply with RoHS 2.0 , Reach requirements |
IP Rating | IP65 |
Other |
Wiring | MC079D 99 A | MC079D 99 Z |
Thimble interface | Zhaga interface |
Installation requirements | built-in installation |
Packaging requirements | Clapboard + Carton(K=A) |
Net weight | Body: 40.6±5g |
Lifetime | 5 years warranty @Ta |
【Function description】
ON-OFF function | Stand-by Period be set to “0s” |
2-step dimming | Stand-by Period be set to “+∞” |
3-step dimming | Stand-by Period be set to “10s/1min/3min/5min/10min/30min” |
Daylight priority | Remote set DH Mode+Daylight Sensor set to
“5Lux/15Lux/30Lux/50Lux/100Lux/150Lux”N/A |
Daylight harvesting | N/A |
【Product Information】
MC079D 99 A
MC079D 99 Z
MC079D 99 A
MC079D 99 Z
【Installation Instruction】
Installation environment
Note |
When installing, please pay attention to the distance between the
microwave antenna and the metal frame. |
【Detection Range】
【Remote】
【Initialization】
- On/Off function / 3-Step dimming function: the sensor turns on the
light at 100% brightness, and will be turned off after 10 seconds.
During initialization,the sensor is not able to detect movement.
- 2-Step dimming function: the sensor turns on the light at 100%
brightness. After 10 seconds, it dims the light to low light level
(the brightness set by stand-by dim level). During initialization,
the sensor is not able to detect the movement.
【Default setting】
Sensitivity: 100%, Hold time: 5s, Daylight sensor: Disable, Stand
by period: 0s, Stand by DIM level: 10%
【Application Notice】
- Sensor should be installed by a professional electrician. Please
turn off power before installing, wiring.
- The distance distance is related to factors such as the moving
speed of the moving object, the size of the moving object, the
installation height, the installation angle, whether the
installation environment is open, and the material of the
reflector. The detection distance given in the specification is a
typical value, it is 165cm/65kg people who walks in an open indoor
environment
- The daylight threshold is in a sunny environment, no shadows, and
ambient light diffuse reflection conditions. In different periods,
climates, and environments, the daylight value detected by the
light sensor may be different.
- Sensor parameters may need to be reconfigured in different
installation environments, please refer to the following
instructions or contact the manufacturer
- This sensor is only for indoor use, outdoor use may be false
triggered by wind and rain, and surrounding moving objects.
- The installation height of the sensor product cannot exceed 15
meters, and the suitable height is 12 meters; the distance between
the two sensors should be greater than 3 meters
- When the sensor is installed in a metal lamp, on a metal reflective
surface, or in a narrow closed environment, the microwaves will be
reflected multiple times and cause false triggering. Please reduce
the sensor sensitivity or contact the manufacturer for technical
support.
- Sensor is compatible with different 0-10V driver but dimming effect
will be different.
- DC regulated power supply with stable output voltage and low ripple
coefficient must be used. The ripple of the power supply should be
less than 100mV ; the load current should be greater than 50 mA
- For the new installation environment, it is recommended to test
5pcs samples before installation.