|
[China]
Trade Verify
Address: 101-1101, Building 17, Dianda Guyuan Industrial Park, Mashantou Community, Matan Street, Guangming District, Shenzhen
Contact name:June Zhao
Shenzhen Merrytek Technology Co., Ltd. |
|
Verified Suppliers
|
|
|
KL90V-PDiiV1 24v Constant Voltage LED Driver 90W For Strip
【Product Feature】
【Parameter】
| Series | Name | KL90V-PDiiV1 | |||
| Input | Voltage range | 198~264Vac 50Hz /60Hz | |||
| Rated supply voltage | 220~240Vac 50Hz /60Hz | ||||
| DC voltage range | 200~240Vdc | ||||
| Input current (@230Vac) | 0.45A Max | ||||
| Inrush Current | 30A (Half current pulse width 100US) @230VAC | ||||
| Power factor | ≥ 0.99 (@230Vac,100% load) | ||||
| Total harmonic distortion | Typical: 6% (@230Vac, 100% load) | ||||
| Stand-by power | ≤0.3W | ||||
| Efficiency(230Vac,100% load) | 92%Max | ||||
| Wiring method | Push terminal, wire cross section:0.5-1.5mm2 | ||||
| Loop-in&Loop-out quantity | 16PCS(@230Vac) | ||||
| Automatic circuit breaker type (Calculate current in the wire) | B10 | 13 | C10 | 7 | |
| B13 | 16 | C13 | 9 | ||
| B16 | 20 | C16 | 11 | ||
| B20 | 25 | C20 | 14 | ||
| B25 | 32 | C25 | 17 | ||
| Output | Operating mode | Constant voltage | |||
| Load type | LED | ||||
| Flickering / Flickering-Free | Flickering-Free | ||||
| Start up time | <1s (@230Vac) | ||||
| Forward voltage | 24V | ||||
| Output current | 3.75A | ||||
| Max. output voltage (no-load ) | 30V | ||||
| Full load output power | 90W Max. | ||||
| Minimum load | 9W | ||||
| Output | Output current/voltage tolerance | ±5% | |||
| Wiring method | Screw terminal, wire cross section:2*0.5-2.5mm2 | ||||
| Control Method | Primary PUSH Dimming | Primary PUSH dimming (Max. lead wire length:20m) | |||
| 1-10V(0-10V)Dimming | 1-10V dimming(Port current＜1mA), (Max. lead wire length:20m) | ||||
| Dimming Range | 1%-100% | ||||
| Secondary PWM dimming | 0-10V port PWM dimming (3KHz-8KHz) | ||||
| Potentiometer | Yes, 100kΩ | ||||
| DALI function | DALI dimming (Max. lead wire length:300m) | ||||
| Exception Protection Requirements | Output over temperature protection | Yes, reset power on to recover | |||
| Output short circuit protection | Yes, reset power on to recover | ||||
Operating Environment | Storage temperature/ humidity | -40℃~80℃, Humidity:10%–95% | |||
| Operating temperature/ humidity | -25~50℃ | ||||
| Max. case temp(Tc) | 85℃ | ||||
| Safety & EMC | EMC standard | EN55015, EN61547, EN61000-3-2, EN61000-3-3 | |||
| DALI standard | IEC62386-102, IEC62386-207 | ||||
| Safety standard | EN61347-1, EN61347-2-13 | ||||
| Certification | CE | ||||
| Withstand voltage | 3750Vac, 5mA, 60s (Input “L N”- Output “SEC”) | ||||
| Others | Degrees of protection | IP20 | |||
| Type of protection | Class II | ||||
| Installation type | Independent installation | ||||
| Installation dimension | 202*58*30mm | ||||
| Memory function | Yes, (PUSH with memory function) | ||||
| PUSH dimming synchronization | 20 units Max. | ||||
| Packaging requirements | Instruction+clapboard+outer carton(K=A) | ||||
| Weight | 400g | ||||
| Life | 5 years @Ta 100% load | ||||
| Note: All parameters are tested at the input voltage of 230Vac and 25 degree environment unless specified. | |||||
【Dimension (Unit:mm)】
【Wiring Diagram】
|
|
| |
【Derating】
【Dimming curve】
【ON/OFF & Description of Dimming Operation】
A. Short press the PUSH switch (short press time 0.1S-1S), the LED
driver will turn on or off.
B. Dimming:
Press and hold the PUSH switch (1S-8S), the LED driver can achieve
dimming, brightening or dimming, the dimming range is 2-100%.
C. Memory:
PUSH dimming has dimming memory function.
D. Dimming synchronization:
The power connected to the same PUSH switch can be synchronized by
pressing and holding the PUSH switch for longer than 15S
E. DALI dimming mode:
Connect the power supply to the DALI system, and it can be dimmed
by the DALI host. The dimming range is 0-100%.
F. Constant voltage dimming drivers cannot be used in lamps with
constant current circuits.
