|
[China]
Trade Verify
Address: 101-1101, Building 17, Dianda Guyuan Industrial Park, Mashantou Community, Matan Street, Guangming District, Shenzhen
Contact name:June Zhao
Shenzhen Merrytek Technology Co., Ltd. |
|
Verified Suppliers
|
|
|
60W Dali LED Dimmable LED Driver
【Product Feature】
1) With DALI dimming function; primary Push dimming function, and state memory.
2) No flicker in the full dimming range.
3) Reduce output current after over temperature.
3)With output short-circuit / over-voltage protection, over-temperature protection of the whole machine,Reduce output current after over temperature.
4) Standby power consumption ≤ 0.5W.
5) 5 years warranty.
【Parameter】
| Input | Voltage range | 198-264V AC 50Hz /60Hz |
| DC input current range | 200-240V DC | |
| Rated supply voltage | 220-240V AC 50Hz /60Hz | |
| input power | 65W Max | |
| Input current | 0.32A Max | |
| Input Inrush Current | 16A ( t width=100us measured at 50% I peak @230Vac) (Cold start, 100% load) | |
| Total harmonic distortion | ≤13% (@ 230Vac, 100% load) | |
| Power Factor | 0.95 (@ 230Vac, under full load) | |
| Leak current | ＜0.5mA/240V | |
| Stand-by Power | ≤0.5W | |
| No-load power consumption | 1W | |
| Leak current | <0.5mA/240V | |
| Working efficiency | 86% Max. @ 230V AC (1050mA full load) | |
| Output | Operating mode | Constant current |
| Load type | LED | |
| Start up time | <1S(AC power-on to output current reaches 90% of rated) | |
| Current Ripple | ±7% (LED load test) | |
| Ripple requirement (Flickering or Flickering-Free) | Flicker-free, less than 2% | |
| No load output voltage | 80VDC Max | |
| Load output voltage | 9-71V DC | |
| Full load output power | 60W Max | |
| Load output current | 350mA(9-71V) 500mA(9-71V) 550mA(9-71V) 650mA(9-71V) 700mA(9-71V) 750mA(9-71V) 850mA(9-70V) 900mA(9-66V) 1000mA(9-60V) 1050mA(9-57V) | |
| Constant current/voltage accuracy | Constant current ±5% | |
| Wiring Method | Push Terminal, wire diameter:0.75-1.5mm2 | |
| Control Method | Primary PUSH dimming | Primary PUSH dimming (maximum lead length: 20M) |
| DALI Dimming | Yes | |
| Exception Protection Requirements | Input overvoltage protection | 300V AC 50Hz / 60Hz 2h |
| Output no-load protection | Yes, self-recovery (with query function) | |
| Output over-temperature protection | Yes, non-recoverable (with query function) | |
| Output short circuit protection | Yes, non-recoverable (with query function) | |
Operating Environment | Operating temperature/humidity | -25℃~50℃ |
| Storage temperature/humidity | -40 ℃… + 80 ℃ 10 ～ 95% RH (non-condensing) | |
| Max. case temp(Tc) | 85℃ | |
| Certification standards | Safety standards | EN61347-1, EN61347-2-13 |
| Electromagnetic compatibility (EMC) standards | EN55015, EN61547, EN61000-3-2, EN61000-3-3 | |
| Environmental requirements | Comply with EU RoHS requirements | |
| Certification | CE ENEC | |
| Others | Insulation withstand voltage | 3750V AC 5mA 60S (input “L N” to output “SEC + SEC- 1-10V”) |
| Input / output (terminal / lead) specifications: Push-type terminal block Wire diameter | 0.75-1.5mm2 | |
| Protection class | IP20 | |
| Overvoltage category | Class II | |
| Installation requirements | stand-alone installation | |
| Installation size | 123 * 79 * 24mm | |
| Packaging requirement | bubble bag + partition + outer box (K = A) | |
| Weight | 200.6 g | |
| Warranty | 5 years warranty @Ta 230V full load |
【Dimension (Unit:mm)】
【Wiring Diagram】
Fig.A PUSH Dimming
Fig. B DALI Dimming
【Derating】
【DALI dimming curve】
【Current gear setting】
| Current / voltage gear setting | 1 | 2 | 3 | 4 | 5 |
| 350mA | - | - | - | - | - |
| 500mA | ON | ON | - | - | - |
| 550mA | ON | - | ON | - | - |
| 650mA | ON | ON | ON | - | - |
| 700mA | ON | ON | - | ON | - |
| 750mA | ON | - | ON | ON | - |
| 850mA | ON | ON | ON | ON | - |
| 900mA | ON | ON | - | ON | ON |
| 1000mA | - | ON | ON | ON | ON |
| 1050mA | ON | ON | ON | ON | ON |
A. Short press the PUSH switch (short press time 0.1S-1S), the LED driver will turn on or off.
B. Dimming:
Press and hold the PUSH switch (1S-8S), the LED driver can realize dimming, brightening or dimming, the
dimming range is 0-100%.
C. Memory:
PUSH dimming has dimming memory function.
D. Dimming synchronization.
The power connected to the same PUSH switch can be synchronized with the long press of the PUSH switch, and the long press time is longer than 15S.
E. DALI dimming mode.
Connect the power supply to the DALI system, and it can be dimmed by the DALI host. The dimming range is 0-100%.
【Attention】
1) The LED string must be connected to the load before turning on the input power, otherwise the LED string may be damaged.
2) After the LED driver input is powered off, there will be a residual voltage at the output, which can be maintained for about 3 minutes.
