|
[China]
Trade Verify
Address: 101-1101, Building 17, Dianda Guyuan Industrial Park, Mashantou Community, Matan Street, Guangming District, Shenzhen
Contact name:June Zhao
Shenzhen Merrytek Technology Co., Ltd. |
|
Verified Suppliers
|
|
|
KL-10V DC Dimmable LED Driver
【Product Feature】
【Parameter】
| Input | Voltage range | 198-264V AC 50Hz /60Hz |
| Rated supply voltage | 220-240V AC 50Hz /60Hz | |
| DC input current range | 200-240V DC | |
| Input current | 0.065A Max | |
| Surge Current | 8A (test twidth 50us@230vac under 50% Ipeak) | |
| Stand-by Power | ≤0.5W (@230Vac When PUSH or DALI turned off) | |
| no-load power consumption | ≤1W | |
| Efficiency | 80% (@230Vac) | |
| Output | Operating mode | CC |
| Load type | LED | |
| Start up time | ≤1S (@230Vac 100% load) | |
| Current Ripple | ±5% (LED load) | |
| Ripple requirement(Flickering or Flickering-Free) | Flicker-free, less than 5% | |
| Idle load output voltage | 55V Max | |
| Load output voltage | 3-38V DC | |
| Full load output power | 10W Max | |
| Load output current | 105mA(28-40V)/160mA(28-40V)/210mA(28-40V)/250mA(28 -40V) | |
| Control Method | Primary PUSH Dimming | N/A |
| 1-10V(0-10V)Dimming | 2%-100% | |
| DALI Dimming | DALI dimming: 0%-100% | |
Exception Protection Requirements | Input over voltage protection | N/A |
| Output over voltage protection | Have | |
| Output idle load protection | Yes, self-recover, with query function. | |
| Output over temperature protection | Yes, with query function. | |
| Output short circuit protection | Yes, with query function. | |
| Operating Environment | Operating temperature/humidity | -25℃~50℃; humidity: 20%–85% (Non-condensing) |
| Storage temperature/humidity | -40℃~80℃; humidity:10%–95% | |
| Max. case temp(Tc) | 85℃ | |
| Safety & EMC | Withstand voltage | 3750Vac 5mA 60S (Input“L N”– output“SEC+ SEC-”) 1500Vac 5mA 60S
(Input “L N” –“PE") 500Vac 5mA 60S (Input “PE” – output “SEC+ SEC- “) |
| EMC standard | EN55015, EN61547, EN61000-3-2, EN61000-3-3 | |
| DALI agreement standard | IEC62386-102,IEC62386-207 | |
| Safety standard | EN61347-1, EN61347-2-13, EN62493,EN60598-1 | |
| Certification | CE | |
| Others | Degrees of protection | IP20 |
| Type of protection | Class I | |
| Input/output terminal specification | Press type terminal station wire diameter: 0.75-1.5mm2 | |
| Installation type | Stand-alone installation | |
| Installation dimension | 120*46*23.8mm | |
| Memory function | PUSH Memory function | |
| packing requirement | PE bag + white box + instruction manual + partition + outer box (K=A) | |
| Weight | 78g |
【Dimension (Unit:mm)】
【Wiring Diagram】
Fig. A PUSH Dimming |
Fig. B DALI Dimming |
【 Reduction Curve】
【Dimming Curve】
【Current gear setting ●:ON ○:OFF】
| Current/voltage tap setting | 1 | 2 | 3 |
| 250MA | ● | ● | ● |
| 210MA | ● | ● | ○ |
| 160MA | ● | ○ | ○ |
| 105MA | ○ | ○ | ○ |
【ON/OFF & Description of Dimming Operation】
【Application Notice】
1) The load LED light string must be connected before the input
power is turned on, otherwise the LED light string may be damaged.
2) After the input power of LED drive is cut off, there will be
residual voltage at the output end, which can last for about 3
minutes.
