|
[China]
Trade Verify
Address: 101-1101, Building 17, Dianda Guyuan Industrial Park, Mashantou Community, Matan Street, Guangming District, Shenzhen
Contact name:June Zhao
Shenzhen Merrytek Technology Co., Ltd. |
|
Verified Suppliers
|
|
|
MLC18C-DP Integrated Motion Sensor Dimmable 28W LED Driver Non-isolated
1.Non-isolated power induction integrated power supply
2.Daylight priority function, automatically turn on/off according to natural light
3.Round ultra-thin size, multiple mounting methods, support for top and bottom, multiple fixing at the bottom
4.Output current can be set,8 DIP Switch to adjust parameters, easy to operate, easy to use
5.Input and output terminals for easy wiring
Parameters:
| Input | Operating Voltage | 198-264V AC 50Hz/60HZ |
| Input Voltage | 220-240V AC 50Hz/60HZ | |
| Input Current | ≤0.11A (230VAC, full load) | |
| Power Factor | 0.9 ( full load) | |
| Efficiency | ≥88% Max.230V full load | |
| Stand-by Power | ≤1W | |
| Wiring Method | Shrapnel terminal | |
| Output | Operating type | Constant current |
| Load type | LED | |
| Ripple requirement (Flickering or Flickering Free) | Flickering(But eyes cannot see the shake) | |
| No-load output voltage | 63V DC Max | |
| Load output voltage range | 24-53V DC | |
| Full load output power | 19W Max. | |
| Load output current | 300mA/350mA | |
| Constant current/voltage Precision | Constant Current Precision ±5% | |
| Wiring Method | Push terminal | |
| Exception Protection Requirements | Output over voltage Protection | Yes |
| Output over load protection | Yes | |
| Output short circuit protection | Yes | |
| Sensor Parameter | HF Operating Frequency | 5.8 GHz ±75 MHz,ISM wave band |
| HF Radiated power | 0.5mW Max. | |
| Hold Time | 0S/ +∞ | |
| Dimming Ratio | 10% /25% | |
| Stand-by Period | 5S/ 1min/ 5min/ 10min | |
| Detection Area | 50%/100% | |
| Daylight Sensor | 5Lux(5Lux)/ 25Lux(75Lux)/ 50Lux(150Lux)/ Disable | |
| HF Detection Area | Radius 3-6m (Mounting height 3m) | |
| Mounting Height: | Suggested mounting Height:3-4m , 6m Max. | |
| Detection Angle | 150°(Wall Mounting), 360°(Ceiling Mounting) | |
Operating Environment | Operating temperature/ humidity | -25℃~50℃ Humidity : 85% (Non-condensing) |
| Storage temperature/ humidity | -40℃~80℃ Humidity : 85% (Non-condensing) | |
| Outer case max. temp(Tc) | 85℃ | |
Safety & EMC
| Isolation pressurization | (L N)input-output,3000VAC/5mA/1min |
| Safety requirement | EN61347-1 | |
| EMC | EN55015 | |
| Certification | CE | |
| Others | IP rating | IP20 |
| Protection level | Class II | |
| Installation size | Φ68mm,H 26mm | |
| Packaging requirement | Bubble bag + clapboard + outer case(K=A | |
| Life | 30000h @ Ta 100% load |
Dimension:
Wring Diagram:
Function:
Function Diagram:
Sensor Setting:
| 1 | |
| 100% | ON |
| 50% | -- |
| 6 | |
| 0s | ON |
| +∞ | - |
| ON | OFF | 4 | 5 |
| 5Lux | 25Lux | ON | ON |
| 25Lux | 75Lux | ON | |
| 50Lux | 150Lux | - | ON |
| Disable | Disable | - | - |
| 2 | 3 | |
| 7S | ON | ON |
| 1min | ON | |
| 5min | ON | |
| 10min |
Stand-by DIM Level
7 | |
| 10% | ON
|
| 25% |
|
Mode
| 8 | |
| Sensor | ON |
| Disable |
