Active Member
|
[China]
Address: Unit 919 of Yagang BLDG, Fu'an Avenue，Pinghu，Longgang，Shenzhen，China
Contact name:Ma
shenzhen merex technology co.,ltd |
|
|
K87-M539M-000 Spring Yamaha Smt Spare Parts for Yamaha Feeder Parts
| Part No | K87-M539M-000 |
| Part Name | Spring |
| Condition | Compatible new |
| Material | Steel |
| Usage | feeder machine |
| Type | Yamaha Smt spare part |
Hot sale stock list:
| LABEL FEEDER FOR HITACHI | GL-00100 |
| P_RCG_SCOPE | KYB-M730B-000 |
| BELT | N510021326AA |
| MOTOR_AC-SERVO | KYK-M86T6-000 |
| BUSH,BEARING | KYB-M3T3R-000 |
| MOTOR | KYA-M700R-000 |
| NOZZLE(FA06) | KYB-M77F6-000 |
| 234F NOZZLE | 45466931 |
| UNIT,I/O | KYL-M86LV-000 |
| ASSY_NOZZLE(VA06) | KYK-M7720-A00 |
| GEAR(Feeder GEAR) | KYD-MC130-000/1016B209 |
| SONY MOTHER BOARD | 1-797-651-12 |
| BLOCK | KYA-M7027-000 |
| BLOCK | KYL-M86KC-000/211G5472 |
| ARM STEEL | N210007284AB |
| NOZZLE(HB03C) | KYB-M7720-100 |
| NOZZLE_HG82C | KYA-M7708-000 |
| GEAR | KYD-MC23C-000/6301352305 |
| ASSY_SHAFT | KYF-M8651-000 |
| HOLDER | KYB-M701R-000 |
| LEVER(SUP) | KYD-MC20D-000 |
| SPRING_COMP | KYD-MCN41-000 |
| SLIP RING | KYB-M7027-000 |
| GEAR | KYD-MC23C-00 |
| GUIDE,LINEAR | LWHD12X3 |
| DSP-2008K SQUEEGE | L:20CM |
| MACHINE SCREW | KYD-MC14G-000 |
| GEAR | KYD-MC20K-00 |
| PIN_HINGE | KYD-MC41U-000 |
| CORD,BCR | KYF-M86NC-000 |
| ASSY,LEVER | KYM-M8648-000 |
| COVER(RB) | KYM-M8612-000 |
| KIC ON BOARD | 6-10 CHANEL |
| BOLT,HEX-SCT 630 000 7503 | 91317-03006 |
| NOZZLE(FF01) | KYB-M77F1-000 |
| 933 NOZZLE | 00346523-03 |
| NPM 12*16 FEEDER | KXFW1KSCA00 |
| ASSY_LEVER(R) | KYD-MC11N-000 |
| NOZZLE (U TYPE) | KYB-M3828-000 |
| NOZZLE(FA05) | KYB-M77F5-000 |
| NOZZLE_SHAFT | KYF-M8619-000 |
| GXH SPECIAL NOZZLE | 13053 |
| BELT | N510065133AA |
| NPM 226CS NOZZLE | N610040783AB |
| PIN-GAUGE | KXF00YHUA00 |
| TAIL PIVOT BEARING | P/N:0740C-0110 |
| NOZZLE(WC01) | KYB-M77W1-100 |
| ASSY_VACUUM_VALVE | KYB-M7034-000 |
| NPM 235C NOZZLE | N610043814AD |
| DD MOTOR | KYF-M860E-000 |
| NOZZLE_HV14C | KYA-M7714-000 |
| NOZZLE FILTER(10K) | KYF-M8645-000 |
| BOLT,HEX-SCT 6300007626 | 91317-04010 |
| POWER SUPPLY | 1-474-020-11 |
| FEEDER CABLE | KYL-M869D-000 |
| PCB-MOUNT | KYK-M861W-000 |
| BOLT,HEX.SOCKET HEAD | 91312-03004 |
| YG12 BELT | KHY-M9129-10 |
| ASSY,GEAR | KYM-M862C-000 |
| DEK POWER SUPPLY | V6G00KZ/185312 |
| Y AXIS GUIDE | SSR5XW2UUC1+970LYH |
| BELT | 44548605 |
| MOTOR_DC | KYD-MCN2G-000 |
| ASSY GEAR | KYD-MC211-000 |
| LEVER | KYB-M3T0M-000 |
| NOZZLE(VC74) | KYK-M7725-000 |
| ASSY_VALVE_F | KYB-M3J0X-000 |
| MOTOR,AC-SERVO | KYL-M8625-000 |
| COVER(MAK1-2) | KYD-MC11X-000 |
| NPM 235CS NOZZLE | N610043815AA |
| SONY NOZZLE | CF25200 |
| ASSY_SPRING_FL | KYD-MC20U-000 |
| ASSY_GEAR | KYD-MC11A-000 |
| PLATE | N610014970AE |
| SEAL | KYB-M702B-000 |
| ASSY_GEAR (8mm) | KYD-MC12L-000/1016120W |
| PIN,HINGE | KYD-MC61N-000/216D0472/6301305042 |
| MOTOR_AC-SERVO | KYA-M700N-000 |
| BELT_TIMING | KYA-M914W-000 |
| GXH Y AXIS GUIDE | GXH Y AXIS GUIDE |
| NPM FILTER | N610097899AA |
| SENSOR-PELEC | KYK-M861Y-000 |
| UNIT-IO(DOM4G) | KYF-M8602-000 |
| SDD Hard Disk | N610059692AA |
| TORX FLAT HEAD 3*5 | P/N:M03X05-TFHS |
| HNS,LIGHTING | KYF-M861W-000 |
| UNIT_DRIVER | KYK-M860F-000 |
| HELICAL SPRING | N210068065AA |
| PIN,HINGE | KYB-M3T2Y-000 |
| 340F NOZZLE | 45466934 |
| BELT | 6*3080*0.9 mm |
| BRACKET | KYL-M86KD-000/211FC709 |
| NOZZLE_HV19C | KYA-M7719-000 |
| BUCK_UP_PIN | KYA-M3802-000 |
| MICRO METER | 350-251-30 |
| GRIP | KYD-MC109-000 |
| BOLT_HEX-SCT | 90990-01J142 M3*12 |
| ASSY_HOOK | KYD-MC10T-000/016J0024 |
| TOOL | N510031628AA |
| NPM 185 NOZZLE | N610070338AB |
| BOLT,HEX-SCT 630 000 7527 | 91317-03010 |
| ASSY_CABLE | KYL-M86NC-000 |
| 937 NOZZLE | 00322591-06 |
| ASSY_NOZZLE(VA05) | KYK-M770J-A00 |
| COVER (12/16mm) | KYD-MC20Y-000 |
| NOZZLE | HG53G |
| BOTTON | ZB6-EB3B |
| PIN_HINGE | KYD-MC42S-000 |
| ROCK | 2-149-675-01 |
| GXH X AXIS GUIDE | GXH X AXIS GUIDE |
| MOTOR_DC | KYD-MC410-000 |
| HNS,EXT-POWER-FDR | KYB-M370R-000 |
| AIR_LINE_EQPT | KYB-M704D-000 |
| NOZZLE_HG52C | KYA-M7705-000 |
| ASSY_NOZZLE(BC02) | KYB-M77C2-B00 |
| GT38080 FEEDER | GT38080 FEEDER |
| HV31 NOZZLE | KYL-M7718-000 |
| COVER | KYK-M86RD-000 |
| BLOCK | KYF-M867D-000 |
| PIN_GUIDE | KYB-M122F-000/216F0879 |
| NOZZLE_HG33C | KYA-M7703-000 |
| SONY1000 FILTER | 4-761-920-01 |
| ASSY_NOZZLE(BT06) | KYB-M77BA-A00 |
| ECLIP,0625 | P/N:0062-ECLIP-E |
| MOTOR,AC-SERVO | KYF-M860P-000 |
| FFU | MX--575-A |
| SONY E1000 FILTER | 4-761-920-01 |
| NPM 240C NOZZLE | N610062681AD |
| NPM X479 VALVE | N510054843AA |
| GEAR | KYK-M864C-000 |
| 935 NOZZLE | 00346524-03 |
| LINE-SENSOR | KYF-M8607-000 |
| GREASE FOR PANASONIC | N510048188AA |
| NPM 8头 NOZZLE HOLDER | N610067607AE |
| ASSY_GEAR | KYD-MC40F-000 |
| BALL | 4-719-920-01 |
| LEVER | KYB-M3T22-000 |
| ASSY_LEVER(L) | KYD-MC11M-000 |
| 8mm FEEDER JIG TAPE | KYH-M8601-00 |
| ASSY_GEAR | KYD-MC412-000 |
| CAM FOLLOWER | KYB-M704A-000 |
| GT-24040B FEEDER | KYD-MCN00-00 |
| GEAR | 4-719-921-02 |
| VALVE | SY3240-5LZD |
| SONY NOZZEL AF12082 | AF12082 |
| SENSOR,PELEC | KYL-M8609-000 |
| DRIVER | N510002593AA |
| POGO BLOCK | 0738A-0029 |
| BOLT,HEX.SOCKET HEAD | KYK-M86NS-000 |
| ASSY,SPROCKET | KYM-M862A-000 |
| NPM 256CS NOZZLE | NPM 256CS NOZZLE |
| F8 SENSOR-PELEC | KYF-M8609-000 |
| NOZZLE(FA04) | KYB-M77F4-000 |
| FAN | 1204KL-04W-B59 |
| Special Nozzle SPO4R | Special Nozzle SPO4R |
| GUIDE LINER ASSY. | KYL-M866D-000 |
| WASHER | 92902-03100 |
| ASSY,GUIDE,LINEAR | KYL-M861U-000 |
| ETC MOTOR | PK2K93S-2D |
| ASSY GEAR | KYD-MC20K-000/0926220R |
| GEAR | KYU-M868B-000 |
| COVER ASSY | X-4700-067-4 |
| ASSY_NOZZLE(BA05) | KYB-M77A5-B00 |
| 16mm FEEDER JIG TAPE | KYH-M8603-00 |
| 938 NOZZLE | 00322592-05 |
| COUPLING | KYK-M86AW-000 |
| COUPLING | KYB-M702C-000 |
| PULLEY,FLAT GXH | KYL-M8681-000 |
| GUIDE,LINEAR | KYF-M867P-000 |
| NPM H8 SENSON | N510048691AA |
| SLIP RING | KYB-M7027-000 |
| BOLT-HEX-SCT | 90990-01J135 M2.5*6 |
| FILTER | K46-M8527-COX |
| SPRING_COMP | KYD-MC3T-000 |
| DISK | KYB-M3T1A-000 |
| PIPE FITTING | 630 048 4656 |
| P/N:JG000912 8mm | P/N:JG000912 8mm |
| ASSY_BLOCK_TOP | KYD-M701U-000 |
| SENSOR | KYF-M8681-000 |
| SENSOR,PELEC | KYL-M86HL-000 |
| CPK JG0250 | CPK JG0250 |
| BLOCK L3 | KYB-M960C-000 |
| BUSH,BEARING | KYB-M3T3S-000 |
| PLATE | KYA-M3804-000 |
| GUIDE,LINEAR | KYK-M86KY-000 |
| BM02 NOZZLE | BM02 |
| ACCESSORY,SV | KYL-M861C-000 |
| VALVE | SY3120-MZD-C6-F2 |
| UNIT,DRIVER | KYK-M860K-000 |
| LIGHTING_UNIT | KYB-M700T-000 |
| CASE-CONN | KYK-M860Y-000 |
| CYLINDER | KYL-M869A-000 |
| V8V11 (MOTOR_HL) | KYA-M700S-000 |
| GREASE | N990PANA-023 |
| PIN_LOCATE | KYD-MC21Y-000 |
| Encoder Read Head For Universal | 49566101 |
| BELT | 00334936S01 |
| ASSY_SUPPRESSOR | KYD-MC10R-000 |
| COVER | KYM-M860X-000 |
| NPM H16 SENSON | N510054833AA |
| NOZZLE(BA06) | KYB-M77A6-000 |
| 360F NOZZLE | 45466917 |
| LEVER | KYB-M3T21-000 |
| SPRING | P/N:0730C-0252 |
| G5S ASSY_SHAFT | KYB-M700V-000 |
| PCB-MOUNT G5 CUP2 | KYF-M868C-000 |
| B-234 NOZZLE | 47561103-B-234 |
| SHAFT ASSY. | N510054811AA/N510069637AA |
| NOZZLE(Y TYPE) | KYB-M382A-000 |
| BELT TIMING | KYA-M9152-000 |
| VALVE | 4-187-212-01 |
| Fuji Filter | AA1FZ04 |
| ASSY_TENSION | KYD-MC21N-000 |
| ETC INDUCTION MOTOR | PKRK93S-2A |
| PIN,HINGE | KYD-MC41S-000 |
| NOZZLE HG33C SET 15 | KYA-M8C07-100 |
| PIN_LOCATE | KYD-MC137-000 |
| RETAINING RING,EXTERNAL | 0125-ERRING-E |
| GXH-1 FILTER | KYL-M860S-000 |
| PIN,LOCATE | KYD-MCN3N-000 |
| SEAL | KYB-M704E-000 |
| GUIDE,LINEAR | KYK-M86LE-001 |
| ASSY,SPRING,FLAT | KYM-M862H-000/6301592541 |
| WASHER | 90990-37J010 |
| GUIDE,LINEAR | KYK-M86LE-001 |
| SENSOR,PELEC | KYK-M86DE-000 |
| PIN-GAUGE | KXF00YHTA00 |
| SPRING_COMP | KYD-MC129-000 |
| LEVER | KYB-M3T01-000 |
| 904 NOZZLE | Y074-V904-0015 |
| WASHER | KYD-MC22H-00 |
| NOZZLE HG52C set 15 | KYA-M8C07-200 |
| COUPLING | KYB-M7116-000 |
| NPM 8mm FEEDER | KXFW1S5A00 |
| BELT | N510060977AA |
| BOLT_HEX-SCT | 90990-06J009 M4*20 |
| COVER(RB) | KYD-MC10L-000 |
| ASSY,HOOK | KYD-MC40A-000 |
| GREASE GUN KH-35 | KXF08V7AA00 |
| SI -F130 REC PLUNGER KIT | A-1067-852-A |
| SONY NOZZEL | AF10071 |
| PIN,HINGE | KYL-M860R-000 |
| MOTOR,AC-SERVO | KYK-M860P-000 |
| PIN_LOCATE | KYD-MC132-000 |
| COVER(HIRA-1) | KYD-MC20X-000 |
| BOLT,HEX-SCT 630 000 7664 | 91317-04020 |
| SPRING COMP | KYD-MC422-000 |
| AIR_LINE_EQPT | KYB-M704D-000 |
| GUIDE,LINEAR | KYK-M860S-000 |
| GERA(HASUBA) | KYD-MC131-000 |
| ASSY,LEVER | KYM-M864H-000 |
| ASSY_PLATE(MAGNET) | KYD-MC115-000 |
| Fuji Packing | PH00991 |
| RT BELT | 3-212-264-01 |
| SEAL | KYT-M862W-000 |
| CLAMP_GUM | KYB-M3T1R-000/0920H153 |
| 0603 CPK JIG CHIP(KOA) | KOA RK73Z1HTTC |
| MOTOR,AC-SERVO | KYL-M867G-000 |
| ASSY GRIP | KYD-MC21H-000 |
| UNIT-DRIVER | KYK-M861A-000 |
| HNS,CONV-MOT-R | KYB-M9143-000 |
| FUSE | KYL-M86KH-000 |
| WASHER | 92902-03200 |
| FEEDER | GD38080 |
| GEAR | KYD-MC153-00 |
| TIMING BELT | KYB-M919E-000 |
| SHAFT ASSY. | KYF-M864U-000 |
| BELT | 6*3080*0.9 mm |
| GS-FB100 VIBRATION FEEDER | KYD-MCHA0-R00 |
| PCBA FIXTURE | FC150-130-60 |
| POWER SUPPLY | 11632XA |
| SHROUDED POGO BLOCK | 0938A-0007 |
| BOLT-HEX-SCT | 90990-01J115 |
| LEVER | KYK-M861V-000 |
| SPRING COMP | KYD-MC13T-000 |
| I/O CABLE,WIDE | 0938A-1007 |
| ETC MOTOR PKRK93S-2 | 2P 300W |
| CASE-CONN | KYF-M860Y-000 |
| PULLEY_TIMING | KYB-M91AL-000 |
| NOZZLE(HB04C) | KYB-M7721-100 |
| YG12F BELT | KHY-M9129-00 |
| GEAR | KYD-MC21U-000 |
| 1220 NOZZLE | 51305323 |
| ASSY_LEVER | KYD-MC212-000 |
| NPM H16 SHAFT | N510064335AA |
| CYLINDER | KYK-M8629-000/KYB-M919H-000 |
| NOZZLE_HV13C | KYA-M7713-000 |
| COVER(LB) | KYM-M8657-000 |
| FUSH-SPECIAL | KYF-M860F-000 |
| GEAR | KYD-MC424-000/223E0481 |
| DEK SQUEEGE | DEK-03T 长25CM |
| SONY TRAY SHUTTER CYLINDER | 1-478-936-11/MXU16-20-M9N |
| 32mm FEEDER JIG TAPE | KYH-M8604-000 |
| 222L0935 Sigma-G5 Y AXIS GUIDE_LINEAR | KYF-M867L-000 |
| SPRING_COMP | KYB-M91CS-000 |
| VALVE | 2-673-684-01 |
| PIN,HINGE | KYB-M3T31-000 |
| TAIL PIVOT | P/N:0740C-0109 |
| ROLLER(B) | KYK-M86EM-000 |
| NPM 230C NOZZLE | N610040784AD |
| GUIDE | KYD-MC11T-000 |
| HOLDER | KYB-M702F-000/0916DK2D |
| NPM 230CS NOZZLE | N610040788AD |
| LEVER | KYK-M86LV-000 |
| COGNEX BOARD | KYK-M86PW-000 |
| MOTOR_AC-SERVO | KYF-M860D-000 |
| CAM_FOLLOWER | KYA-M912N-000 |
| LEVER | KYB-M3T33-000 |
| HNS,CORD | KYL-M8621-000 |
| BELT | 00200341-01 |
About Us
Merex Techonologies Co.,Ltd
In 2016, Shenzhen merex Technology Co., Ltd. was established to build a more timely and effective
communication platform, and realize the company's service tenet of serving leading customers.
The engineers of the company are professional technicians who have been certified by the original
factory for more than 10 years. They always adhere to the value of putting the interests of customers
first, and provide customers with high-quality equipment accessories, consumables, fixtures and
technical support services.
In order to effectively reduce the cost of customers, the company set up a machining plant, and
changed most of the feeder parts to self-produced parts, so as to ensure sufficient inventory and
reduce the cost of customers at the same time
SMT technical service - 20 years
SMT parts sales - 18 years
Export to foreign customers - 6 years
Fixture development and manufacturing - 5 years
It is precisely because meire technology has the following advantages over the same industry that
more and more customers choose meire as their preferred supplier.
Professional pre-sales advice support
Excellent after-sales technical service
One stop solution for SMT accessories
Flexible payment and return policy
Stock in the factory with sufficient stock and fast delivery
Merex is a professional company engaged in SMT one-stop technical services, mainly engaged
in Hitachi, Yamaha, Panasonic and other SMT equipment and accessories, with a professional
after-sales service team, committed to rapid, efficient and low-cost solutions to all kinds of SMT
problems encountered by customers in production. In addition, the company also developed
automatic feeder calibrator, Cpk test fixture and other related products, and obtained national
patents. Welcome agent!
All engineering personnel of Merex are trained by the original factory, with advanced testing
instruments and a full set of technical documents. The average SMT related work experience
is more than 15 years, so our response speed and technology are better than others
Merex pursues the quality and details of the mechanism, and strives to deliver every product
to customers as a top-quality product. No matter domestic or overseas customers, we have
unified standards. If there are problems occasionally, we promise to deliver goods first to
minimize the loss caused by downtime.
