Active Member
|
[China]
Address: Unit 919 of Yagang BLDG, Fu'an Avenue，Pinghu，Longgang，Shenzhen，China
Contact name:Ma
shenzhen merex technology co.,ltd |
|
|
KYB-M703C-000 / 1011300J ASSY_TOP BLOCK SMT Machine Parts for Hitachi
| Part No | KYB-M703C-000 / 1011300J |
| Part Name | ASSY_TOP BLOCK |
| Condition | Original New |
| Material | steel |
| Usage | Hitachi machine |
| Type | SMT part |
Hot sale stock list:
| LIGHTING_UNIT | KYB-M700T-000 |
| BUCK_UP_PIN | KYA-M3802-000 |
| TAIL PIVOT | P/N:0740C-0109 |
| ASSY_GEAR | KYD-MC40F-000 |
| NOZZLE_HG33C | KYA-M7703-000 |
| GXH-1 FILTER | KYL-M860S-000 |
| GEAR(Feeder GEAR) | KYD-MC130-000/1016B209 |
| SENSOR,PELEC | KYL-M86HL-000 |
| SPRING_COMP | KYD-MC3T-000 |
| MOTOR_DC | KYD-MCN2G-000 |
| ROCK | 2-149-675-01 |
| DISK | KYB-M3T1A-000 |
| PIN,HINGE | KYB-M3T2Y-000 |
| POWER SUPPLY | 1-474-020-11 |
| BOLT,HEX-SCT 630 000 7503 | 91317-03006 |
| BOLT,HEX.SOCKET HEAD | KYK-M86NS-000 |
| ASSY_GEAR | KYD-MC11A-000 |
| NPM H16 SENSON | N510054833AA |
| FEEDER | GD38080 |
| NPM FILTER | N610097899AA |
| RT BELT | 3-212-264-01 |
| SEAL | KYT-M862W-000 |
| UNIT_DRIVER | KYK-M860F-000 |
| ASSY_PLATE(MAGNET) | KYD-MC115-000 |
| PCBA FIXTURE | FC150-130-60 |
| ASSY_LEVER(L) | KYD-MC11M-000 |
| RETAINING RING,EXTERNAL | 0125-ERRING-E |
| NOZZLE_HV19C | KYA-M7719-000 |
| MOTOR_DC | KYD-MC410-000 |
| BUSH,BEARING | KYB-M3T3R-000 |
| SPRING COMP | KYD-MC13T-000 |
| 937 NOZZLE | 00322591-06 |
| COVER(RB) | KYM-M8612-000 |
| BLOCK | KYL-M86KC-000/211G5472 |
| LEVER | KYB-M3T33-000 |
| GUIDE,LINEAR | KYK-M86LE-001 |
| SONY MOTHER BOARD | 1-797-651-12 |
| TOOL | N510031628AA |
| ASSY,SPRING,FLAT | KYM-M862H-000/6301592541 |
| GT38080 FEEDER | GT38080 FEEDER |
| PIPE FITTING | 630 048 4656 |
| NOZZLE_SHAFT | KYF-M8619-000 |
| GEAR | KYD-MC424-000/223E0481 |
| COUPLING | KYK-M86AW-000 |
| GT-24040B FEEDER | KYD-MCN00-00 |
| SI -F130 REC PLUNGER KIT | A-1067-852-A |
| NOZZLE(HB03C) | KYB-M7720-100 |
| LEVER | KYB-M3T01-000 |
| PIN_HINGE | KYD-MC42S-000 |
| GEAR | KYD-MC23C-000/6301352305 |
| WASHER | 90990-37J010 |
| NOZZLE | HG53G |
| PIN_HINGE | KYD-MC41U-000 |
| TAIL PIVOT BEARING | P/N:0740C-0110 |
| PLATE | KYA-M3804-000 |
| NPM 230C NOZZLE | N610040784AD |
| PIN-GAUGE | KXF00YHUA00 |
| BELT | N510065133AA |
| KIC ON BOARD | 6-10 CHANEL |
| ASSY_NOZZLE(BC02) | KYB-M77C2-B00 |
| LEVER(SUP) | KYD-MC20D-000 |
| SLIP RING | KYB-M7027-000 |
| 8mm FEEDER JIG TAPE | KYH-M8601-00 |
| V8V11 (MOTOR_HL) | KYA-M700S-000 |
| BELT | 44548605 |
| MOTOR,AC-SERVO | KYF-M860P-000 |
| MOTOR,AC-SERVO | KYK-M860P-000 |
| SHAFT ASSY. | KYF-M864U-000 |
| Y AXIS GUIDE | SSR5XW2UUC1+970LYH |
| HOLDER | KYB-M701R-000 |
| NPM 226CS NOZZLE | N610040783AB |
| NOZZLE(FA04) | KYB-M77F4-000 |
| ASSY,SPROCKET | KYM-M862A-000 |
| 935 NOZZLE | 00346524-03 |
| 32mm FEEDER JIG TAPE | KYH-M8604-000 |
| ASSY_TENSION | KYD-MC21N-000 |
| PIN,HINGE | KYD-MC61N-000/216D0472/6301305042 |
| LABEL FEEDER FOR HITACHI | GL-00100 |
| F8 SENSOR-PELEC | KYF-M8609-000 |
| GXH SPECIAL NOZZLE | 13053 |
| SPRING COMP | KYD-MC422-000 |
| I/O CABLE,WIDE | 0938A-1007 |
| COVER(MAK1-2) | KYD-MC11X-000 |
| SENSOR-PELEC | KYK-M861Y-000 |
| NPM H8 SENSON | N510048691AA |
| ASSY_HOOK | KYD-MC10T-000/016J0024 |
| MOTOR,AC-SERVO | KYL-M867G-000 |
| BOTTON | ZB6-EB3B |
| BELT | 00334936S01 |
| NOZZLE_HV13C | KYA-M7713-000 |
| ASSY_GEAR (8mm) | KYD-MC12L-000/1016120W |
| WASHER | 92902-03100 |
| NPM 185 NOZZLE | N610070338AB |
| PULLEY,FLAT GXH | KYL-M8681-000 |
| GEAR | KYK-M864C-000 |
| ECLIP,0625 | P/N:0062-ECLIP-E |
| 933 NOZZLE | 00346523-03 |
| SONY NOZZEL AF12082 | AF12082 |
| BRACKET | KYL-M86KD-000/211FC709 |
| ASSY_NOZZLE(VA06) | KYK-M7720-A00 |
| BOLT,HEX-SCT 630 000 7664 | 91317-04020 |
| B-234 NOZZLE | 47561103-B-234 |
| NPM 235C NOZZLE | N610043814AD |
| VALVE | 2-673-684-01 |
| DRIVER | N510002593AA |
| NOZZLE(Y TYPE) | KYB-M382A-000 |
| SPRING_COMP | KYD-MC129-000 |
| SPRING_COMP | KYB-M91CS-000 |
| SPRING_COMP | KYD-MCN41-000 |
| ASSY GEAR | KYD-MC211-000 |
| MOTOR_AC-SERVO | KYA-M700N-000 |
| BELT | N510060977AA |
| NOZZLE_HG82C | KYA-M7708-000 |
| COVER(LB) | KYM-M8657-000 |
| ACCESSORY,SV | KYL-M861C-000 |
| BLOCK | KYA-M7027-000 |
| PCB-MOUNT | KYK-M861W-000 |
| ASSY_CABLE | KYL-M86NC-000 |
| ASSY_GEAR | KYD-MC412-000 |
| NPM 240C NOZZLE | N610062681AD |
| LINE-SENSOR | KYF-M8607-000 |
| NPM 8mm FEEDER | KXFW1S5A00 |
| NPM X479 VALVE | N510054843AA |
| ASSY_LEVER | KYD-MC212-000 |
| COVER | KYK-M86RD-000 |
| PIN,HINGE | KYL-M860R-000 |
| ASSY_BLOCK_TOP | KYD-M701U-000 |
| ASSY_NOZZLE(VA05) | KYK-M770J-A00 |
| ROLLER(B) | KYK-M86EM-000 |
| AIR_LINE_EQPT | KYB-M704D-000 |
| PIN,LOCATE | KYD-MCN3N-000 |
| CASE-CONN | KYF-M860Y-000 |
| 938 NOZZLE | 00322592-05 |
| SONY E1000 FILTER | 4-761-920-01 |
| BOLT_HEX-SCT | 90990-06J009 M4*20 |
| ETC MOTOR | PK2K93S-2D |
| Fuji Packing | PH00991 |
| COVER(HIRA-1) | KYD-MC20X-000 |
| VALVE | SY3120-MZD-C6-F2 |
| PCB-MOUNT G5 CUP2 | KYF-M868C-000 |
| NOZZLE_HG52C | KYA-M7705-000 |
| GXH X AXIS GUIDE | GXH X AXIS GUIDE |
| BLOCK | KYF-M867D-000 |
| HNS,EXT-POWER-FDR | KYB-M370R-000 |
| NPM 8头 NOZZLE HOLDER | N610067607AE |
| Special Nozzle SPO4R | Special Nozzle SPO4R |
| BUSH,BEARING | KYB-M3T3S-000 |
| COVER (12/16mm) | KYD-MC20Y-000 |
| COVER | KYM-M860X-000 |
| FEEDER CABLE | KYL-M869D-000 |
| NOZZLE(BA06) | KYB-M77A6-000 |
| CLAMP_GUM | KYB-M3T1R-000/0920H153 |
| NOZZLE HG52C set 15 | KYA-M8C07-200 |
| BALL | 4-719-920-01 |
| HELICAL SPRING | N210068065AA |
| ETC MOTOR PKRK93S-2 | 2P 300W |
| GRIP | KYD-MC109-000 |
| GEAR | KYD-MC20K-00 |
| GEAR | 4-719-921-02 |
| ASSY GRIP | KYD-MC21H-000 |
| SENSOR,PELEC | KYK-M86DE-000 |
| UNIT-IO(DOM4G) | KYF-M8602-000 |
| SONY1000 FILTER | 4-761-920-01 |
| 222L0935 Sigma-G5 Y AXIS GUIDE_LINEAR | KYF-M867L-000 |
| CAM_FOLLOWER | KYA-M912N-000 |
| GUIDE LINER ASSY. | KYL-M866D-000 |
| NOZZLE FILTER(10K) | KYF-M8645-000 |
| P_RCG_SCOPE | KYB-M730B-000 |
| DEK SQUEEGE | DEK-03T 长25CM |
| BOLT-HEX-SCT | 90990-01J135 M2.5*6 |
| P/N:JG000912 8mm | P/N:JG000912 8mm |
| ASSY,GEAR | KYM-M862C-000 |
| CAM FOLLOWER | KYB-M704A-000 |
| GREASE | N990PANA-023 |
| GREASE GUN KH-35 | KXF08V7AA00 |
| ASSY_SPRING_FL | KYD-MC20U-000 |
| HOLDER | KYB-M702F-000/0916DK2D |
| GUIDE,LINEAR | LWHD12X3 |
| ASSY_NOZZLE(BT06) | KYB-M77BA-A00 |
| DEK POWER SUPPLY | V6G00KZ/185312 |
| LEVER | KYB-M3T21-000 |
| COVER ASSY | X-4700-067-4 |
| BELT | 6*3080*0.9 mm |
| NPM 230CS NOZZLE | N610040788AD |
| FILTER | K46-M8527-COX |
| SEAL | KYB-M702B-000 |
| 1220 NOZZLE | 51305323 |
| ASSY,GUIDE,LINEAR | KYL-M861U-000 |
| WASHER | KYD-MC22H-00 |
| AIR_LINE_EQPT | KYB-M704D-000 |
| NPM H16 SHAFT | N510064335AA |
| MOTOR,AC-SERVO | KYL-M8625-000 |
| Fuji Filter | AA1FZ04 |
| MICRO METER | 350-251-30 |
| BOLT,HEX-SCT 630 000 7527 | 91317-03010 |
| VALVE | SY3240-5LZD |
| GEAR | KYU-M868B-000 |
| ASSY_SUPPRESSOR | KYD-MC10R-000 |
| BELT | N510021326AA |
| NOZZLE(FF01) | KYB-M77F1-000 |
| TORX FLAT HEAD 3*5 | P/N:M03X05-TFHS |
| ARM STEEL | N210007284AB |
| GEAR | KYD-MC21U-000 |
| PULLEY_TIMING | KYB-M91AL-000 |
| SONY NOZZEL | AF10071 |
| GUIDE,LINEAR | KYK-M860S-000 |
| MACHINE SCREW | KYD-MC14G-000 |
| BLOCK L3 | KYB-M960C-000 |
| SHROUDED POGO BLOCK | 0938A-0007 |
| SDD Hard Disk | N610059692AA |
| GUIDE,LINEAR | KYK-M86KY-000 |
| MOTOR | KYA-M700R-000 |
| BOLT_HEX-SCT | 90990-01J142 M3*12 |
| BELT TIMING | KYA-M9152-000 |
| NOZZLE_HV14C | KYA-M7714-000 |
| ASSY,HOOK | KYD-MC40A-000 |
| GUIDE,LINEAR | KYK-M86LE-001 |
| NOZZLE(HB04C) | KYB-M7721-100 |
| BOLT,HEX.SOCKET HEAD | 91312-03004 |
| BM02 NOZZLE | BM02 |
| SONY TRAY SHUTTER CYLINDER | 1-478-936-11/MXU16-20-M9N |
| Encoder Read Head For Universal | 49566101 |
| GXH Y AXIS GUIDE | GXH Y AXIS GUIDE |
| FFU | MX--575-A |
| NOZZLE(FA06) | KYB-M77F6-000 |
| NOZZLE (U TYPE) | KYB-M3828-000 |
| VALVE | 4-187-212-01 |
| GS-FB100 VIBRATION FEEDER | KYD-MCHA0-R00 |
| CASE-CONN | KYK-M860Y-000 |
| NPM 12*16 FEEDER | KXFW1KSCA00 |
| NPM 235CS NOZZLE | N610043815AA |
| ASSY_SHAFT | KYF-M8651-000 |
| CYLINDER | KYL-M869A-000 |
| DD MOTOR | KYF-M860E-000 |
| CORD,BCR | KYF-M86NC-000 |
| 0603 CPK JIG CHIP(KOA) | KOA RK73Z1HTTC |
| PIN_GUIDE | KYB-M122F-000/216F0879 |
| 340F NOZZLE | 45466934 |
| 360F NOZZLE | 45466917 |
| YG12 BELT | KHY-M9129-10 |
| 904 NOZZLE | Y074-V904-0015 |
| GUIDE,LINEAR | KYF-M867P-000 |
| G5S ASSY_SHAFT | KYB-M700V-000 |
| LEVER | KYK-M86LV-000 |
| LEVER | KYK-M861V-000 |
| ASSY_VACUUM_VALVE | KYB-M7034-000 |
| NPM 256CS NOZZLE | NPM 256CS NOZZLE |
| MOTOR_AC-SERVO | KYK-M86T6-000 |
| ASSY GEAR | KYD-MC20K-000/0926220R |
| POGO BLOCK | 0738A-0029 |
| FUSH-SPECIAL | KYF-M860F-000 |
| CYLINDER | KYK-M8629-000/KYB-M919H-000 |
| 234F NOZZLE | 45466931 |
| PLATE | N610014970AE |
| WASHER | 92902-03200 |
| BOLT,HEX-SCT 6300007626 | 91317-04010 |
| HNS,CORD | KYL-M8621-000 |
| HNS,LIGHTING | KYF-M861W-000 |
| GERA(HASUBA) | KYD-MC131-000 |
| HNS,CONV-MOT-R | KYB-M9143-000 |
| SENSOR,PELEC | KYL-M8609-000 |
| PIN_LOCATE | KYD-MC137-000 |
| LEVER | KYB-M3T0M-000 |
| SENSOR | KYF-M8681-000 |
| SONY NOZZLE | CF25200 |
| GREASE FOR PANASONIC | N510048188AA |
| COGNEX BOARD | KYK-M86PW-000 |
| COUPLING | KYB-M702C-000 |
| COVER(RB) | KYD-MC10L-000 |
| UNIT,I/O | KYL-M86LV-000 |
| FAN | 1204KL-04W-B59 |
| UNIT-DRIVER | KYK-M861A-000 |
| BOLT-HEX-SCT | 90990-01J115 |
| BELT_TIMING | KYA-M914W-000 |
| ETC INDUCTION MOTOR | PKRK93S-2A |
| ASSY_VALVE_F | KYB-M3J0X-000 |
| TIMING BELT | KYB-M919E-000 |
| LEVER | KYB-M3T22-000 |
| PIN,HINGE | KYD-MC41S-000 |
| GUIDE | KYD-MC11T-000 |
| FUSE | KYL-M86KH-000 |
| BELT | 6*3080*0.9 mm |
| PIN,HINGE | KYB-M3T31-000 |
| POWER SUPPLY | 11632XA |
| YG12F BELT | KHY-M9129-00 |
| CPK JG0250 | CPK JG0250 |
| DSP-2008K SQUEEGE | L:20CM |
| UNIT,DRIVER | KYK-M860K-000 |
| PIN-GAUGE | KXF00YHTA00 |
| SLIP RING | KYB-M7027-000 |
| NOZZLE(WC01) | KYB-M77W1-100 |
| NOZZLE(VC74) | KYK-M7725-000 |
| MOTOR_AC-SERVO | KYF-M860D-000 |
| ASSY_LEVER(R) | KYD-MC11N-000 |
| SEAL | KYB-M704E-000 |
| SHAFT ASSY. | N510054811AA/N510069637AA |
| ASSY_NOZZLE(BA05) | KYB-M77A5-B00 |
| COUPLING | KYB-M7116-000 |
| PIN_LOCATE | KYD-MC21Y-000 |
| ASSY,LEVER | KYM-M8648-000 |
| NOZZLE HG33C SET 15 | KYA-M8C07-100 |
| SPRING | P/N:0730C-0252 |
| HV31 NOZZLE | KYL-M7718-000 |
| GEAR | KYD-MC153-00 |
| 16mm FEEDER JIG TAPE | KYH-M8603-00 |
| GEAR | KYD-MC23C-00 |
| PIN_LOCATE | KYD-MC132-000 |
| ASSY,LEVER | KYM-M864H-000 |
| NOZZLE(FA05) | KYB-M77F5-000 |
| BELT | 00200341-01 |
About Us
Merex Techonologies Co.,Ltd
In 2016, Shenzhen merex Technology Co., Ltd. was established to build a more timely and effective
communication platform, and realize the company's service tenet of serving leading customers.
The engineers of the company are professional technicians who have been certified by the original
factory for more than 10 years. They always adhere to the value of putting the interests of customers
first, and provide customers with high-quality equipment accessories, consumables, fixtures and
technical support services.
In order to effectively reduce the cost of customers, the company set up a machining plant, and
changed most of the feeder parts to self-produced parts, so as to ensure sufficient inventory and
reduce the cost of customers at the same time
SMT technical service - 20 years
SMT parts sales - 18 years
Export to foreign customers - 6 years
Fixture development and manufacturing - 5 years
It is precisely because meire technology has the following advantages over the same industry that
more and more customers choose meire as their preferred supplier.
Professional pre-sales advice support
Excellent after-sales technical service
One stop solution for SMT accessories
Flexible payment and return policy
Stock in the factory with sufficient stock and fast delivery
Merex is a professional company engaged in SMT one-stop technical services, mainly engaged
in Hitachi, Yamaha, Panasonic and other SMT equipment and accessories, with a professional
after-sales service team, committed to rapid, efficient and low-cost solutions to all kinds of SMT
problems encountered by customers in production. In addition, the company also developed
automatic feeder calibrator, Cpk test fixture and other related products, and obtained national
patents. Welcome agent!
All engineering personnel of Merex are trained by the original factory, with advanced testing
instruments and a full set of technical documents. The average SMT related work experience
is more than 15 years, so our response speed and technology are better than others
Merex pursues the quality and details of the mechanism, and strives to deliver every product
to customers as a top-quality product. No matter domestic or overseas customers, we have
unified standards. If there are problems occasionally, we promise to deliver goods first to
minimize the loss caused by downtime.
