Active Member
|
[China]
Address: Unit 919 of Yagang BLDG, Fu'an Avenue，Pinghu，Longgang，Shenzhen，China
Contact name:Ma
shenzhen merex technology co.,ltd |
|
|
KW1-M229K-00X SPRING SMT Feeder Parts for YAMAHA Feeder
| Part No | KW1-M229K-00X |
| Part Name | Spring |
| Condition | Compatible new |
| Material | steel |
| Usage | Hitachi machine |
| Type | Smt Feeder part |
Hot sale stock list:
| 937 NOZZLE | 00322591-06 |
| RT BELT | 3-212-264-01 |
| MOTOR_AC-SERVO | KYK-M86T6-000 |
| GXH X AXIS GUIDE | GXH X AXIS GUIDE |
| BELT | N510060977AA |
| ASSY,SPRING,FLAT | KYM-M862H-000/6301592541 |
| PIN,HINGE | KYL-M860R-000 |
| VALVE | SY3240-5LZD |
| NPM 185 NOZZLE | N610070338AB |
| CYLINDER | KYL-M869A-000 |
| SPRING_COMP | KYD-MCN41-000 |
| ASSY_LEVER(L) | KYD-MC11M-000 |
| BLOCK L3 | KYB-M960C-000 |
| NPM 8mm FEEDER | KXFW1S5A00 |
| CPK JG0250 | CPK JG0250 |
| GT38080 FEEDER | GT38080 FEEDER |
| ETC MOTOR PKRK93S-2 | 2P 300W |
| GREASE | N990PANA-023 |
| PIN_LOCATE | KYD-MC21Y-000 |
| ASSY,GUIDE,LINEAR | KYL-M861U-000 |
| SLIP RING | KYB-M7027-000 |
| 340F NOZZLE | 45466934 |
| ASSY_GEAR | KYD-MC40F-000 |
| BOLT,HEX-SCT 630 000 7527 | 91317-03010 |
| BUSH,BEARING | KYB-M3T3S-000 |
| COVER(HIRA-1) | KYD-MC20X-000 |
| CAM FOLLOWER | KYB-M704A-000 |
| GREASE GUN KH-35 | KXF08V7AA00 |
| POGO BLOCK | 0738A-0029 |
| HELICAL SPRING | N210068065AA |
| GUIDE,LINEAR | KYK-M86LE-001 |
| ASSY_NOZZLE(VA06) | KYK-M7720-A00 |
| CORD,BCR | KYF-M86NC-000 |
| NPM H16 SENSON | N510054833AA |
| ASSY_BLOCK_TOP | KYD-M701U-000 |
| GUIDE,LINEAR | KYK-M86LE-001 |
| BOLT-HEX-SCT | 90990-01J135 M2.5*6 |
| GT-24040B FEEDER | KYD-MCN00-00 |
| F8 SENSOR-PELEC | KYF-M8609-000 |
| MOTOR,AC-SERVO | KYL-M8625-000 |
| SONY1000 FILTER | 4-761-920-01 |
| B-234 NOZZLE | 47561103-B-234 |
| GERA(HASUBA) | KYD-MC131-000 |
| UNIT-IO(DOM4G) | KYF-M8602-000 |
| NOZZLE FILTER(10K) | KYF-M8645-000 |
| NOZZLE(Y TYPE) | KYB-M382A-000 |
| NOZZLE_HG33C | KYA-M7703-000 |
| NPM X479 VALVE | N510054843AA |
| MOTOR_AC-SERVO | KYF-M860D-000 |
| Special Nozzle SPO4R | Special Nozzle SPO4R |
| CASE-CONN | KYK-M860Y-000 |
| MACHINE SCREW | KYD-MC14G-000 |
| WASHER | 92902-03100 |
| DEK POWER SUPPLY | V6G00KZ/185312 |
| HOLDER | KYB-M701R-000 |
| PIN_LOCATE | KYD-MC137-000 |
| COVER | KYK-M86RD-000 |
| PULLEY_TIMING | KYB-M91AL-000 |
| SPRING_COMP | KYB-M91CS-000 |
| MICRO METER | 350-251-30 |
| CLAMP_GUM | KYB-M3T1R-000/0920H153 |
| GXH SPECIAL NOZZLE | 13053 |
| ASSY_LEVER(R) | KYD-MC11N-000 |
| GUIDE,LINEAR | KYK-M860S-000 |
| NPM 12*16 FEEDER | KXFW1KSCA00 |
| LABEL FEEDER FOR HITACHI | GL-00100 |
| NPM H16 SHAFT | N510064335AA |
| SONY NOZZEL AF12082 | AF12082 |
| ASSY,HOOK | KYD-MC40A-000 |
| BELT | 44548605 |
| BELT TIMING | KYA-M9152-000 |
| NOZZLE_HV13C | KYA-M7713-000 |
| TORX FLAT HEAD 3*5 | P/N:M03X05-TFHS |
| COVER(RB) | KYD-MC10L-000 |
| DISK | KYB-M3T1A-000 |
| HV31 NOZZLE | KYL-M7718-000 |
| BOTTON | ZB6-EB3B |
| ASSY_CABLE | KYL-M86NC-000 |
| GEAR(Feeder GEAR) | KYD-MC130-000/1016B209 |
| FFU | MX--575-A |
| GEAR | KYD-MC23C-000/6301352305 |
| PCBA FIXTURE | FC150-130-60 |
| 904 NOZZLE | Y074-V904-0015 |
| ASSY_GEAR | KYD-MC412-000 |
| ASSY,SPROCKET | KYM-M862A-000 |
| GEAR | KYD-MC21U-000 |
| GUIDE,LINEAR | KYF-M867P-000 |
| NPM 8头 NOZZLE HOLDER | N610067607AE |
| ASSY_TENSION | KYD-MC21N-000 |
| 938 NOZZLE | 00322592-05 |
| FUSH-SPECIAL | KYF-M860F-000 |
| ASSY_GEAR | KYD-MC11A-000 |
| PIN_HINGE | KYD-MC42S-000 |
| LEVER | KYB-M3T0M-000 |
| BALL | 4-719-920-01 |
| FILTER | K46-M8527-COX |
| MOTOR,AC-SERVO | KYK-M860P-000 |
| COVER | KYM-M860X-000 |
| NOZZLE(FF01) | KYB-M77F1-000 |
| GXH Y AXIS GUIDE | GXH Y AXIS GUIDE |
| DEK SQUEEGE | DEK-03T 长25CM |
| PIN-GAUGE | KXF00YHUA00 |
| CYLINDER | KYK-M8629-000/KYB-M919H-000 |
| GUIDE,LINEAR | KYK-M86KY-000 |
| GEAR | KYD-MC20K-00 |
| LEVER(SUP) | KYD-MC20D-000 |
| HNS,CORD | KYL-M8621-000 |
| NOZZLE HG52C set 15 | KYA-M8C07-200 |
| ASSY_VACUUM_VALVE | KYB-M7034-000 |
| ASSY_HOOK | KYD-MC10T-000/016J0024 |
| BELT | 6*3080*0.9 mm |
| SENSOR-PELEC | KYK-M861Y-000 |
| GEAR | KYD-MC424-000/223E0481 |
| WASHER | 90990-37J010 |
| NOZZLE_HG52C | KYA-M7705-000 |
| ASSY_GEAR (8mm) | KYD-MC12L-000/1016120W |
| GEAR | 4-719-921-02 |
| SONY TRAY SHUTTER CYLINDER | 1-478-936-11/MXU16-20-M9N |
| ASSY GEAR | KYD-MC20K-000/0926220R |
| MOTOR_DC | KYD-MC410-000 |
| PLATE | N610014970AE |
| NPM 230CS NOZZLE | N610040788AD |
| NPM 226CS NOZZLE | N610040783AB |
| BUCK_UP_PIN | KYA-M3802-000 |
| RETAINING RING,EXTERNAL | 0125-ERRING-E |
| NOZZLE(HB03C) | KYB-M7720-100 |
| COUPLING | KYB-M7116-000 |
| MOTOR | KYA-M700R-000 |
| SI -F130 REC PLUNGER KIT | A-1067-852-A |
| Encoder Read Head For Universal | 49566101 |
| BELT | N510065133AA |
| PCB-MOUNT | KYK-M861W-000 |
| PIN,HINGE | KYD-MC41S-000 |
| BOLT-HEX-SCT | 90990-01J115 |
| NPM 235C NOZZLE | N610043814AD |
| DRIVER | N510002593AA |
| NOZZLE (U TYPE) | KYB-M3828-000 |
| BLOCK | KYL-M86KC-000/211G5472 |
| P_RCG_SCOPE | KYB-M730B-000 |
| GREASE FOR PANASONIC | N510048188AA |
| CASE-CONN | KYF-M860Y-000 |
| LEVER | KYB-M3T21-000 |
| POWER SUPPLY | 1-474-020-11 |
| BELT | 6*3080*0.9 mm |
| NOZZLE(VC74) | KYK-M7725-000 |
| GXH-1 FILTER | KYL-M860S-000 |
| SPRING | P/N:0730C-0252 |
| SPRING COMP | KYD-MC422-000 |
| COVER(RB) | KYM-M8612-000 |
| P/N:JG000912 8mm | P/N:JG000912 8mm |
| Y AXIS GUIDE | SSR5XW2UUC1+970LYH |
| ROLLER(B) | KYK-M86EM-000 |
| VALVE | SY3120-MZD-C6-F2 |
| BUSH,BEARING | KYB-M3T3R-000 |
| SENSOR,PELEC | KYL-M8609-000 |
| 16mm FEEDER JIG TAPE | KYH-M8603-00 |
| 935 NOZZLE | 00346524-03 |
| ARM STEEL | N210007284AB |
| SLIP RING | KYB-M7027-000 |
| WASHER | 92902-03200 |
| NPM 230C NOZZLE | N610040784AD |
| GUIDE,LINEAR | LWHD12X3 |
| DD MOTOR | KYF-M860E-000 |
| NOZZLE(FA06) | KYB-M77F6-000 |
| NPM H8 SENSON | N510048691AA |
| SDD Hard Disk | N610059692AA |
| COVER ASSY | X-4700-067-4 |
| AIR_LINE_EQPT | KYB-M704D-000 |
| NPM 256CS NOZZLE | NPM 256CS NOZZLE |
| Fuji Filter | AA1FZ04 |
| PIN,LOCATE | KYD-MCN3N-000 |
| NOZZLE_SHAFT | KYF-M8619-000 |
| TIMING BELT | KYB-M919E-000 |
| LINE-SENSOR | KYF-M8607-000 |
| 933 NOZZLE | 00346523-03 |
| 8mm FEEDER JIG TAPE | KYH-M8601-00 |
| COVER(LB) | KYM-M8657-000 |
| BOLT,HEX.SOCKET HEAD | KYK-M86NS-000 |
| GEAR | KYU-M868B-000 |
| 360F NOZZLE | 45466917 |
| NOZZLE | HG53G |
| V8V11 (MOTOR_HL) | KYA-M700S-000 |
| LEVER | KYB-M3T33-000 |
| SHROUDED POGO BLOCK | 0938A-0007 |
| TAIL PIVOT BEARING | P/N:0740C-0110 |
| FEEDER | GD38080 |
| PCB-MOUNT G5 CUP2 | KYF-M868C-000 |
| BOLT,HEX-SCT 6300007626 | 91317-04010 |
| LEVER | KYK-M86LV-000 |
| AIR_LINE_EQPT | KYB-M704D-000 |
| SEAL | KYB-M704E-000 |
| Fuji Packing | PH00991 |
| PIN_LOCATE | KYD-MC132-000 |
| POWER SUPPLY | 11632XA |
| ASSY,GEAR | KYM-M862C-000 |
| BLOCK | KYF-M867D-000 |
| SONY E1000 FILTER | 4-761-920-01 |
| SENSOR,PELEC | KYL-M86HL-000 |
| BELT | N510021326AA |
| ETC MOTOR | PK2K93S-2D |
| COUPLING | KYK-M86AW-000 |
| UNIT_DRIVER | KYK-M860F-000 |
| HNS,CONV-MOT-R | KYB-M9143-000 |
| SENSOR,PELEC | KYK-M86DE-000 |
| SONY MOTHER BOARD | 1-797-651-12 |
| SEAL | KYB-M702B-000 |
| LEVER | KYK-M861V-000 |
| NPM 240C NOZZLE | N610062681AD |
| UNIT,I/O | KYL-M86LV-000 |
| DSP-2008K SQUEEGE | L:20CM |
| PIN,HINGE | KYD-MC61N-000/216D0472/6301305042 |
| ECLIP,0625 | P/N:0062-ECLIP-E |
| MOTOR,AC-SERVO | KYF-M860P-000 |
| BELT_TIMING | KYA-M914W-000 |
| 32mm FEEDER JIG TAPE | KYH-M8604-000 |
| 1220 NOZZLE | 51305323 |
| I/O CABLE,WIDE | 0938A-1007 |
| COVER(MAK1-2) | KYD-MC11X-000 |
| TAIL PIVOT | P/N:0740C-0109 |
| UNIT,DRIVER | KYK-M860K-000 |
| LEVER | KYB-M3T22-000 |
| BOLT,HEX.SOCKET HEAD | 91312-03004 |
| 0603 CPK JIG CHIP(KOA) | KOA RK73Z1HTTC |
| MOTOR_AC-SERVO | KYA-M700N-000 |
| YG12 BELT | KHY-M9129-10 |
| 234F NOZZLE | 45466931 |
| ASSY_LEVER | KYD-MC212-000 |
| ASSY,LEVER | KYM-M8648-000 |
| BELT | 00334936S01 |
| NOZZLE(BA06) | KYB-M77A6-000 |
| FAN | 1204KL-04W-B59 |
| ASSY_VALVE_F | KYB-M3J0X-000 |
| PIN-GAUGE | KXF00YHTA00 |
| GEAR | KYK-M864C-000 |
| PIN,HINGE | KYB-M3T31-000 |
| PLATE | KYA-M3804-000 |
| NOZZLE_HV14C | KYA-M7714-000 |
| 222L0935 Sigma-G5 Y AXIS GUIDE_LINEAR | KYF-M867L-000 |
| NOZZLE HG33C SET 15 | KYA-M8C07-100 |
| SPRING_COMP | KYD-MC3T-000 |
| GEAR | KYD-MC153-00 |
| SHAFT ASSY. | N510054811AA/N510069637AA |
| SEAL | KYT-M862W-000 |
| VALVE | 2-673-684-01 |
| NOZZLE(WC01) | KYB-M77W1-100 |
| KIC ON BOARD | 6-10 CHANEL |
| PULLEY,FLAT GXH | KYL-M8681-000 |
| PIN_HINGE | KYD-MC41U-000 |
| WASHER | KYD-MC22H-00 |
| LEVER | KYB-M3T01-000 |
| UNIT-DRIVER | KYK-M861A-000 |
| G5S ASSY_SHAFT | KYB-M700V-000 |
| SPRING_COMP | KYD-MC129-000 |
| ACCESSORY,SV | KYL-M861C-000 |
| COVER (12/16mm) | KYD-MC20Y-000 |
| BRACKET | KYL-M86KD-000/211FC709 |
| ASSY_SUPPRESSOR | KYD-MC10R-000 |
| BOLT,HEX-SCT 630 000 7664 | 91317-04020 |
| GUIDE LINER ASSY. | KYL-M866D-000 |
| ASSY_PLATE(MAGNET) | KYD-MC115-000 |
| HNS,LIGHTING | KYF-M861W-000 |
| LIGHTING_UNIT | KYB-M700T-000 |
| ASSY_NOZZLE(VA05) | KYK-M770J-A00 |
| BLOCK | KYA-M7027-000 |
| BOLT_HEX-SCT | 90990-06J009 M4*20 |
| FUSE | KYL-M86KH-000 |
| NPM 235CS NOZZLE | N610043815AA |
| BOLT_HEX-SCT | 90990-01J142 M3*12 |
| YG12F BELT | KHY-M9129-00 |
| NOZZLE(FA05) | KYB-M77F5-000 |
| ASSY_NOZZLE(BT06) | KYB-M77BA-A00 |
| ROCK | 2-149-675-01 |
| HOLDER | KYB-M702F-000/0916DK2D |
| CAM_FOLLOWER | KYA-M912N-000 |
| GEAR | KYD-MC23C-00 |
| SENSOR | KYF-M8681-000 |
| COUPLING | KYB-M702C-000 |
| MOTOR_DC | KYD-MCN2G-000 |
| SONY NOZZLE | CF25200 |
| ASSY_NOZZLE(BC02) | KYB-M77C2-B00 |
| GUIDE | KYD-MC11T-000 |
| NOZZLE_HG82C | KYA-M7708-000 |
| BOLT,HEX-SCT 630 000 7503 | 91317-03006 |
| PIPE FITTING | 630 048 4656 |
| NOZZLE(FA04) | KYB-M77F4-000 |
| SONY NOZZEL | AF10071 |
| GS-FB100 VIBRATION FEEDER | KYD-MCHA0-R00 |
| ASSY_SHAFT | KYF-M8651-000 |
| VALVE | 4-187-212-01 |
| GRIP | KYD-MC109-000 |
| BM02 NOZZLE | BM02 |
| PIN,HINGE | KYB-M3T2Y-000 |
| ASSY GEAR | KYD-MC211-000 |
| COGNEX BOARD | KYK-M86PW-000 |
| ASSY,LEVER | KYM-M864H-000 |
| ASSY GRIP | KYD-MC21H-000 |
| FEEDER CABLE | KYL-M869D-000 |
| NOZZLE(HB04C) | KYB-M7721-100 |
| ASSY_SPRING_FL | KYD-MC20U-000 |
| ETC INDUCTION MOTOR | PKRK93S-2A |
| SHAFT ASSY. | KYF-M864U-000 |
| PIN_GUIDE | KYB-M122F-000/216F0879 |
| HNS,EXT-POWER-FDR | KYB-M370R-000 |
| TOOL | N510031628AA |
| MOTOR,AC-SERVO | KYL-M867G-000 |
| NOZZLE_HV19C | KYA-M7719-000 |
| SPRING COMP | KYD-MC13T-000 |
| NPM FILTER | N610097899AA |
| ASSY_NOZZLE(BA05) | KYB-M77A5-B00 |
| BELT | 00200341-01 |
About Us
Merex Techonologies Co.,Ltd
In 2016, Shenzhen merex Technology Co., Ltd. was established to build a more timely and effective
communication platform, and realize the company's service tenet of serving leading customers.
The engineers of the company are professional technicians who have been certified by the original
factory for more than 10 years. They always adhere to the value of putting the interests of customers
first, and provide customers with high-quality equipment accessories, consumables, fixtures and
technical support services.
In order to effectively reduce the cost of customers, the company set up a machining plant, and
changed most of the feeder parts to self-produced parts, so as to ensure sufficient inventory and
reduce the cost of customers at the same time
SMT technical service - 20 years
SMT parts sales - 18 years
Export to foreign customers - 6 years
Fixture development and manufacturing - 5 years
It is precisely because meire technology has the following advantages over the same industry that
more and more customers choose meire as their preferred supplier.
Professional pre-sales advice support
Excellent after-sales technical service
One stop solution for SMT accessories
Flexible payment and return policy
Stock in the factory with sufficient stock and fast delivery
Merex is a professional company engaged in SMT one-stop technical services, mainly engaged
in Hitachi, Yamaha, Panasonic and other SMT equipment and accessories, with a professional
after-sales service team, committed to rapid, efficient and low-cost solutions to all kinds of SMT
problems encountered by customers in production. In addition, the company also developed
automatic feeder calibrator, Cpk test fixture and other related products, and obtained national
patents. Welcome agent!
All engineering personnel of Merex are trained by the original factory, with advanced testing
instruments and a full set of technical documents. The average SMT related work experience
is more than 15 years, so our response speed and technology are better than others
Merex pursues the quality and details of the mechanism, and strives to deliver every product
to customers as a top-quality product. No matter domestic or overseas customers, we have
unified standards. If there are problems occasionally, we promise to deliver goods first to
minimize the loss caused by downtime.
