Active Member
|
[China]
Address: Unit 919 of Yagang BLDG, Fu'an Avenue，Pinghu，Longgang，Shenzhen，China
Contact name:Ma
shenzhen merex technology co.,ltd |
|
|
KYD-MC10K-000 / 1016B00Q COVER(LB) Smt Feeder Parts for Hitachi
| Part No | 1016B00Q |
| Part Name | COVER(LB) |
| Condition | Compatible new |
| Material | steel |
| Usage | Hitachi machine |
| Type | SMT Feeder part |
Hot sale stock list:
| NOZZLE(FA06) | KYB-M77F6-000 |
| MOTOR,AC-SERVO | KYK-M860P-000 |
| SPRING_COMP | KYD-MC129-000 |
| V8V11 (MOTOR_HL) | KYA-M700S-000 |
| COVER(RB) | KYM-M8612-000 |
| PIN_LOCATE | KYD-MC21Y-000 |
| BELT_TIMING | KYA-M914W-000 |
| GXH SPECIAL NOZZLE | 13053 |
| SPRING_COMP | KYD-MCN41-000 |
| GEAR | KYD-MC23C-00 |
| MOTOR_DC | KYD-MCN2G-000 |
| SPRING COMP | KYD-MC422-000 |
| SENSOR-PELEC | KYK-M861Y-000 |
| B-234 NOZZLE | 47561103-B-234 |
| GUIDE,LINEAR | KYK-M86KY-000 |
| 0603 CPK JIG CHIP(KOA) | KOA RK73Z1HTTC |
| ASSY_SPRING_FL | KYD-MC20U-000 |
| BOLT,HEX-SCT 630 000 7527 | 91317-03010 |
| ASSY_NOZZLE(BT06) | KYB-M77BA-A00 |
| GT-24040B FEEDER | KYD-MCN00-00 |
| 938 NOZZLE | 00322592-05 |
| ASSY GEAR | KYD-MC20K-000/0926220R |
| SEAL | KYB-M704E-000 |
| PIN_HINGE | KYD-MC41U-000 |
| PIN,HINGE | KYB-M3T2Y-000 |
| NOZZLE(FF01) | KYB-M77F1-000 |
| MOTOR,AC-SERVO | KYL-M867G-000 |
| GEAR | KYD-MC21U-000 |
| BUCK_UP_PIN | KYA-M3802-000 |
| TAIL PIVOT BEARING | P/N:0740C-0110 |
| 1220 NOZZLE | 51305323 |
| BOLT,HEX-SCT 630 000 7664 | 91317-04020 |
| BOLT_HEX-SCT | 90990-06J009 M4*20 |
| SHROUDED POGO BLOCK | 0938A-0007 |
| NPM 185 NOZZLE | N610070338AB |
| BELT | 6*3080*0.9 mm |
| ASSY_HOOK | KYD-MC10T-000/016J0024 |
| PLATE | KYA-M3804-000 |
| PIN-GAUGE | KXF00YHUA00 |
| NOZZLE(BA06) | KYB-M77A6-000 |
| DISK | KYB-M3T1A-000 |
| NOZZLE_HV14C | KYA-M7714-000 |
| PCB-MOUNT | KYK-M861W-000 |
| ETC INDUCTION MOTOR | PKRK93S-2A |
| MICRO METER | 350-251-30 |
| PIN-GAUGE | KXF00YHTA00 |
| SONY NOZZEL | AF10071 |
| 340F NOZZLE | 45466934 |
| NPM H16 SENSON | N510054833AA |
| ASSY_TENSION | KYD-MC21N-000 |
| 360F NOZZLE | 45466917 |
| COUPLING | KYB-M7116-000 |
| P_RCG_SCOPE | KYB-M730B-000 |
| ASSY_LEVER(L) | KYD-MC11M-000 |
| WASHER | 90990-37J010 |
| PCBA FIXTURE | FC150-130-60 |
| NPM 230CS NOZZLE | N610040788AD |
| ASSY_SHAFT | KYF-M8651-000 |
| SENSOR,PELEC | KYL-M8609-000 |
| BRACKET | KYL-M86KD-000/211FC709 |
| AIR_LINE_EQPT | KYB-M704D-000 |
| CAM FOLLOWER | KYB-M704A-000 |
| SPRING_COMP | KYB-M91CS-000 |
| BALL | 4-719-920-01 |
| POWER SUPPLY | 11632XA |
| LEVER | KYB-M3T33-000 |
| BELT | N510065133AA |
| UNIT,I/O | KYL-M86LV-000 |
| NPM H16 SHAFT | N510064335AA |
| PIN_LOCATE | KYD-MC132-000 |
| GUIDE,LINEAR | KYK-M86LE-001 |
| ASSY GEAR | KYD-MC211-000 |
| ROLLER(B) | KYK-M86EM-000 |
| ASSY_VALVE_F | KYB-M3J0X-000 |
| NOZZLE(Y TYPE) | KYB-M382A-000 |
| ASSY_GEAR | KYD-MC412-000 |
| COVER(HIRA-1) | KYD-MC20X-000 |
| CASE-CONN | KYK-M860Y-000 |
| Fuji Packing | PH00991 |
| LEVER | KYK-M86LV-000 |
| SONY NOZZLE | CF25200 |
| HV31 NOZZLE | KYL-M7718-000 |
| ASSY_GEAR | KYD-MC40F-000 |
| ASSY,SPROCKET | KYM-M862A-000 |
| PULLEY_TIMING | KYB-M91AL-000 |
| ASSY,SPRING,FLAT | KYM-M862H-000/6301592541 |
| GEAR | KYD-MC424-000/223E0481 |
| 8mm FEEDER JIG TAPE | KYH-M8601-00 |
| WASHER | 92902-03100 |
| GUIDE LINER ASSY. | KYL-M866D-000 |
| PIN,HINGE | KYD-MC61N-000/216D0472/6301305042 |
| NOZZLE_HV13C | KYA-M7713-000 |
| AIR_LINE_EQPT | KYB-M704D-000 |
| NOZZLE(HB04C) | KYB-M7721-100 |
| COVER (12/16mm) | KYD-MC20Y-000 |
| ASSY_LEVER | KYD-MC212-000 |
| NPM 226CS NOZZLE | N610040783AB |
| COUPLING | KYK-M86AW-000 |
| 933 NOZZLE | 00346523-03 |
| NOZZLE_SHAFT | KYF-M8619-000 |
| PULLEY,FLAT GXH | KYL-M8681-000 |
| PIN,HINGE | KYD-MC41S-000 |
| POWER SUPPLY | 1-474-020-11 |
| GUIDE,LINEAR | KYK-M86LE-001 |
| Y AXIS GUIDE | SSR5XW2UUC1+970LYH |
| SENSOR,PELEC | KYK-M86DE-000 |
| ASSY_CABLE | KYL-M86NC-000 |
| BELT | N510021326AA |
| SONY TRAY SHUTTER CYLINDER | 1-478-936-11/MXU16-20-M9N |
| NOZZLE | HG53G |
| HOLDER | KYB-M702F-000/0916DK2D |
| PIPE FITTING | 630 048 4656 |
| YG12 BELT | KHY-M9129-10 |
| PIN,HINGE | KYL-M860R-000 |
| MOTOR_AC-SERVO | KYK-M86T6-000 |
| Encoder Read Head For Universal | 49566101 |
| TIMING BELT | KYB-M919E-000 |
| GEAR(Feeder GEAR) | KYD-MC130-000/1016B209 |
| SPRING | P/N:0730C-0252 |
| COUPLING | KYB-M702C-000 |
| UNIT-IO(DOM4G) | KYF-M8602-000 |
| UNIT,DRIVER | KYK-M860K-000 |
| COVER(RB) | KYD-MC10L-000 |
| NPM 240C NOZZLE | N610062681AD |
| BUSH,BEARING | KYB-M3T3R-000 |
| COVER | KYK-M86RD-000 |
| NOZZLE(FA04) | KYB-M77F4-000 |
| BOLT-HEX-SCT | 90990-01J115 |
| PIN,HINGE | KYB-M3T31-000 |
| Fuji Filter | AA1FZ04 |
| RT BELT | 3-212-264-01 |
| HNS,CONV-MOT-R | KYB-M9143-000 |
| ASSY_VACUUM_VALVE | KYB-M7034-000 |
| NOZZLE(VC74) | KYK-M7725-000 |
| GREASE FOR PANASONIC | N510048188AA |
| CPK JG0250 | CPK JG0250 |
| PCB-MOUNT G5 CUP2 | KYF-M868C-000 |
| VALVE | SY3120-MZD-C6-F2 |
| LABEL FEEDER FOR HITACHI | GL-00100 |
| NOZZLE(WC01) | KYB-M77W1-100 |
| LIGHTING_UNIT | KYB-M700T-000 |
| NOZZLE HG52C set 15 | KYA-M8C07-200 |
| WASHER | KYD-MC22H-00 |
| LEVER(SUP) | KYD-MC20D-000 |
| FAN | 1204KL-04W-B59 |
| GXH-1 FILTER | KYL-M860S-000 |
| UNIT-DRIVER | KYK-M861A-000 |
| I/O CABLE,WIDE | 0938A-1007 |
| HNS,CORD | KYL-M8621-000 |
| TOOL | N510031628AA |
| BELT | 44548605 |
| DEK SQUEEGE | DEK-03T 长25CM |
| SPRING_COMP | KYD-MC3T-000 |
| PLATE | N610014970AE |
| SEAL | KYB-M702B-000 |
| SENSOR,PELEC | KYL-M86HL-000 |
| MOTOR,AC-SERVO | KYF-M860P-000 |
| YG12F BELT | KHY-M9129-00 |
| GUIDE,LINEAR | KYK-M860S-000 |
| HNS,EXT-POWER-FDR | KYB-M370R-000 |
| GS-FB100 VIBRATION FEEDER | KYD-MCHA0-R00 |
| BLOCK L3 | KYB-M960C-000 |
| F8 SENSOR-PELEC | KYF-M8609-000 |
| BOLT_HEX-SCT | 90990-01J142 M3*12 |
| COVER ASSY | X-4700-067-4 |
| ETC MOTOR PKRK93S-2 | 2P 300W |
| COVER(LB) | KYM-M8657-000 |
| CASE-CONN | KYF-M860Y-000 |
| PIN_HINGE | KYD-MC42S-000 |
| ASSY GRIP | KYD-MC21H-000 |
| ASSY_GEAR | KYD-MC11A-000 |
| ASSY,GUIDE,LINEAR | KYL-M861U-000 |
| GREASE | N990PANA-023 |
| ASSY_PLATE(MAGNET) | KYD-MC115-000 |
| SENSOR | KYF-M8681-000 |
| NPM 8头 NOZZLE HOLDER | N610067607AE |
| BM02 NOZZLE | BM02 |
| MACHINE SCREW | KYD-MC14G-000 |
| SLIP RING | KYB-M7027-000 |
| FUSH-SPECIAL | KYF-M860F-000 |
| MOTOR_AC-SERVO | KYA-M700N-000 |
| SONY MOTHER BOARD | 1-797-651-12 |
| NPM 230C NOZZLE | N610040784AD |
| LINE-SENSOR | KYF-M8607-000 |
| 234F NOZZLE | 45466931 |
| MOTOR | KYA-M700R-000 |
| VALVE | 2-673-684-01 |
| BOTTON | ZB6-EB3B |
| BOLT-HEX-SCT | 90990-01J135 M2.5*6 |
| LEVER | KYB-M3T22-000 |
| GUIDE | KYD-MC11T-000 |
| ASSY_SUPPRESSOR | KYD-MC10R-000 |
| GXH X AXIS GUIDE | GXH X AXIS GUIDE |
| NOZZLE FILTER(10K) | KYF-M8645-000 |
| MOTOR_DC | KYD-MC410-000 |
| GEAR | KYD-MC20K-00 |
| BOLT,HEX-SCT 6300007626 | 91317-04010 |
| GUIDE,LINEAR | KYF-M867P-000 |
| NPM 235CS NOZZLE | N610043815AA |
| NOZZLE (U TYPE) | KYB-M3828-000 |
| TORX FLAT HEAD 3*5 | P/N:M03X05-TFHS |
| NOZZLE HG33C SET 15 | KYA-M8C07-100 |
| DEK POWER SUPPLY | V6G00KZ/185312 |
| HELICAL SPRING | N210068065AA |
| 904 NOZZLE | Y074-V904-0015 |
| LEVER | KYB-M3T01-000 |
| ASSY,HOOK | KYD-MC40A-000 |
| NOZZLE_HG52C | KYA-M7705-000 |
| GT38080 FEEDER | GT38080 FEEDER |
| BLOCK | KYL-M86KC-000/211G5472 |
| CORD,BCR | KYF-M86NC-000 |
| SHAFT ASSY. | N510054811AA/N510069637AA |
| SLIP RING | KYB-M7027-000 |
| ASSY_LEVER(R) | KYD-MC11N-000 |
| CLAMP_GUM | KYB-M3T1R-000/0920H153 |
| SHAFT ASSY. | KYF-M864U-000 |
| NOZZLE_HV19C | KYA-M7719-000 |
| KIC ON BOARD | 6-10 CHANEL |
| GEAR | KYD-MC153-00 |
| BLOCK | KYF-M867D-000 |
| 935 NOZZLE | 00346524-03 |
| 16mm FEEDER JIG TAPE | KYH-M8603-00 |
| SONY1000 FILTER | 4-761-920-01 |
| NOZZLE(HB03C) | KYB-M7720-100 |
| LEVER | KYB-M3T21-000 |
| LEVER | KYK-M861V-000 |
| GEAR | KYK-M864C-000 |
| VALVE | SY3240-5LZD |
| ASSY_BLOCK_TOP | KYD-M701U-000 |
| GXH Y AXIS GUIDE | GXH Y AXIS GUIDE |
| BOLT,HEX-SCT 630 000 7503 | 91317-03006 |
| CAM_FOLLOWER | KYA-M912N-000 |
| ETC MOTOR | PK2K93S-2D |
| 937 NOZZLE | 00322591-06 |
| COVER | KYM-M860X-000 |
| BELT | 6*3080*0.9 mm |
| UNIT_DRIVER | KYK-M860F-000 |
| FILTER | K46-M8527-COX |
| 222L0935 Sigma-G5 Y AXIS GUIDE_LINEAR | KYF-M867L-000 |
| GEAR | KYD-MC23C-000/6301352305 |
| DRIVER | N510002593AA |
| MOTOR,AC-SERVO | KYL-M8625-000 |
| ASSY,GEAR | KYM-M862C-000 |
| HNS,LIGHTING | KYF-M861W-000 |
| ECLIP,0625 | P/N:0062-ECLIP-E |
| POGO BLOCK | 0738A-0029 |
| BOLT,HEX.SOCKET HEAD | KYK-M86NS-000 |
| G5S ASSY_SHAFT | KYB-M700V-000 |
| NOZZLE_HG33C | KYA-M7703-000 |
| HOLDER | KYB-M701R-000 |
| P/N:JG000912 8mm | P/N:JG000912 8mm |
| 32mm FEEDER JIG TAPE | KYH-M8604-000 |
| GRIP | KYD-MC109-000 |
| BLOCK | KYA-M7027-000 |
| BUSH,BEARING | KYB-M3T3S-000 |
| GERA(HASUBA) | KYD-MC131-000 |
| FUSE | KYL-M86KH-000 |
| SEAL | KYT-M862W-000 |
| ROCK | 2-149-675-01 |
| MOTOR_AC-SERVO | KYF-M860D-000 |
| NPM 235C NOZZLE | N610043814AD |
| ACCESSORY,SV | KYL-M861C-000 |
| LEVER | KYB-M3T0M-000 |
| SPRING COMP | KYD-MC13T-000 |
| FEEDER | GD38080 |
| SONY NOZZEL AF12082 | AF12082 |
| FFU | MX--575-A |
| FEEDER CABLE | KYL-M869D-000 |
| DSP-2008K SQUEEGE | L:20CM |
| TAIL PIVOT | P/N:0740C-0109 |
| DD MOTOR | KYF-M860E-000 |
| ASSY,LEVER | KYM-M8648-000 |
| NOZZLE(FA05) | KYB-M77F5-000 |
| NOZZLE_HG82C | KYA-M7708-000 |
| ASSY_NOZZLE(BA05) | KYB-M77A5-B00 |
| COGNEX BOARD | KYK-M86PW-000 |
| GUIDE,LINEAR | LWHD12X3 |
| BELT | 00334936S01 |
| BOLT,HEX.SOCKET HEAD | 91312-03004 |
| SDD Hard Disk | N610059692AA |
| COVER(MAK1-2) | KYD-MC11X-000 |
| PIN,LOCATE | KYD-MCN3N-000 |
| SI -F130 REC PLUNGER KIT | A-1067-852-A |
| GEAR | KYU-M868B-000 |
| ARM STEEL | N210007284AB |
| ASSY,LEVER | KYM-M864H-000 |
| NPM 8mm FEEDER | KXFW1S5A00 |
| VALVE | 4-187-212-01 |
| BELT | N510060977AA |
| CYLINDER | KYL-M869A-000 |
| BELT TIMING | KYA-M9152-000 |
| Special Nozzle SPO4R | Special Nozzle SPO4R |
| GREASE GUN KH-35 | KXF08V7AA00 |
| NPM 12*16 FEEDER | KXFW1KSCA00 |
| ASSY_NOZZLE(BC02) | KYB-M77C2-B00 |
| NPM 256CS NOZZLE | NPM 256CS NOZZLE |
| RETAINING RING,EXTERNAL | 0125-ERRING-E |
| PIN_LOCATE | KYD-MC137-000 |
| ASSY_GEAR (8mm) | KYD-MC12L-000/1016120W |
| CYLINDER | KYK-M8629-000/KYB-M919H-000 |
| SONY E1000 FILTER | 4-761-920-01 |
| PIN_GUIDE | KYB-M122F-000/216F0879 |
| WASHER | 92902-03200 |
| NPM FILTER | N610097899AA |
| GEAR | 4-719-921-02 |
| ASSY_NOZZLE(VA06) | KYK-M7720-A00 |
| NPM X479 VALVE | N510054843AA |
| NPM H8 SENSON | N510048691AA |
| ASSY_NOZZLE(VA05) | KYK-M770J-A00 |
| BELT | 00200341-01 |
About Us
Merex Techonologies Co.,Ltd
In 2016, Shenzhen merex Technology Co., Ltd. was established to build a more timely and effective
communication platform, and realize the company's service tenet of serving leading customers.
The engineers of the company are professional technicians who have been certified by the original
factory for more than 10 years. They always adhere to the value of putting the interests of customers
first, and provide customers with high-quality equipment accessories, consumables, fixtures and
technical support services.
In order to effectively reduce the cost of customers, the company set up a machining plant, and
changed most of the feeder parts to self-produced parts, so as to ensure sufficient inventory and
reduce the cost of customers at the same time
SMT technical service - 20 years
SMT parts sales - 18 years
Export to foreign customers - 6 years
Fixture development and manufacturing - 5 years
It is precisely because meire technology has the following advantages over the same industry that
more and more customers choose meire as their preferred supplier.
Professional pre-sales advice support
Excellent after-sales technical service
One stop solution for SMT accessories
Flexible payment and return policy
Stock in the factory with sufficient stock and fast delivery
Merex is a professional company engaged in SMT one-stop technical services, mainly engaged
in Hitachi, Yamaha, Panasonic and other SMT equipment and accessories, with a professional
after-sales service team, committed to rapid, efficient and low-cost solutions to all kinds of SMT
problems encountered by customers in production. In addition, the company also developed
automatic feeder calibrator, Cpk test fixture and other related products, and obtained national
patents. Welcome agent!
All engineering personnel of Merex are trained by the original factory, with advanced testing
instruments and a full set of technical documents. The average SMT related work experience
is more than 15 years, so our response speed and technology are better than others
Merex pursues the quality and details of the mechanism, and strives to deliver every product
to customers as a top-quality product. No matter domestic or overseas customers, we have
unified standards. If there are problems occasionally, we promise to deliver goods first to
minimize the loss caused by downtime.
