Active Member
|
[China]
Address: Unit 919 of Yagang BLDG, Fu'an Avenue，Pinghu，Longgang，Shenzhen，China
Contact name:Ma
shenzhen merex technology co.,ltd |
|
|
N61002833AA / N210099708AC COVER (CM402 0603 ) SMT Feeder Parts for Panasonic Machine
| Part No | N210099708AC N61002833AA |
| Part Name | Cover |
| Condition | Compatible new |
| Material | Brass |
| Usage | SMT Panasonic CM402 Machine |
| Type | SMT Panasonic CM402 Machine Feeder Parts |
Hot sale stock list:
| MOTOR | KYA-M700R-000 |
| I/O CABLE,WIDE | 0938A-1007 |
| GUIDE,LINEAR | KYK-M86LE-001 |
| 933 NOZZLE | 00346523-03 |
| LEVER | KYB-M3T0M-000 |
| BELT | 6*3080*0.9 mm |
| MOTOR,AC-SERVO | KYL-M867G-000 |
| MOTOR,AC-SERVO | KYK-M860P-000 |
| GT38080 FEEDER | GT38080 FEEDER |
| BELT_TIMING | KYA-M914W-000 |
| BELT | N510021326AA |
| Encoder Read Head For Universal | 49566101 |
| 0603 CPK JIG CHIP(KOA) | KOA RK73Z1HTTC |
| VALVE | SY3240-5LZD |
| SONY E1000 FILTER | 4-761-920-01 |
| PIN_LOCATE | KYD-MC21Y-000 |
| GUIDE,LINEAR | KYF-M867P-000 |
| BLOCK L3 | KYB-M960C-000 |
| ASSY_SHAFT | KYF-M8651-000 |
| PIN-GAUGE | KXF00YHTA00 |
| POGO BLOCK | 0738A-0029 |
| SONY TRAY SHUTTER CYLINDER | 1-478-936-11/MXU16-20-M9N |
| COVER | KYK-M86RD-000 |
| BOLT_HEX-SCT | 90990-06J009 M4*20 |
| GREASE | N990PANA-023 |
| NOZZLE(FA04) | KYB-M77F4-000 |
| LABEL FEEDER FOR HITACHI | GL-00100 |
| SENSOR,PELEC | KYK-M86DE-000 |
| COUPLING | KYK-M86AW-000 |
| Y AXIS GUIDE | SSR5XW2UUC1+970LYH |
| FFU | MX--575-A |
| GT-24040B FEEDER | KYD-MCN00-00 |
| MOTOR_AC-SERVO | KYA-M700N-000 |
| PIN,HINGE | KYB-M3T31-000 |
| ASSY_BLOCK_TOP | KYD-M701U-000 |
| Special Nozzle SPO4R | Special Nozzle SPO4R |
| SHAFT ASSY. | KYF-M864U-000 |
| PIN_GUIDE | KYB-M122F-000/216F0879 |
| GEAR | KYD-MC20K-00 |
| CORD,BCR | KYF-M86NC-000 |
| HNS,CORD | KYL-M8621-000 |
| BELT | 44548605 |
| NOZZLE_HG33C | KYA-M7703-000 |
| SI -F130 REC PLUNGER KIT | A-1067-852-A |
| WASHER | KYD-MC22H-00 |
| DD MOTOR | KYF-M860E-000 |
| LIGHTING_UNIT | KYB-M700T-000 |
| GUIDE,LINEAR | KYK-M860S-000 |
| SENSOR | KYF-M8681-000 |
| P_RCG_SCOPE | KYB-M730B-000 |
| ASSY_SUPPRESSOR | KYD-MC10R-000 |
| ASSY,LEVER | KYM-M864H-000 |
| ASSY_NOZZLE(BT06) | KYB-M77BA-A00 |
| BOLT-HEX-SCT | 90990-01J115 |
| LEVER | KYB-M3T21-000 |
| PIN,HINGE | KYD-MC41S-000 |
| CASE-CONN | KYK-M860Y-000 |
| COVER(RB) | KYM-M8612-000 |
| NOZZLE HG52C set 15 | KYA-M8C07-200 |
| BLOCK | KYA-M7027-000 |
| COVER (12/16mm) | KYD-MC20Y-000 |
| PIN,HINGE | KYL-M860R-000 |
| LEVER | KYK-M861V-000 |
| GRIP | KYD-MC109-000 |
| ASSY_CABLE | KYL-M86NC-000 |
| DEK POWER SUPPLY | V6G00KZ/185312 |
| LEVER | KYK-M86LV-000 |
| 938 NOZZLE | 00322592-05 |
| NPM 185 NOZZLE | N610070338AB |
| NPM H16 SHAFT | N510064335AA |
| COVER | KYM-M860X-000 |
| MOTOR,AC-SERVO | KYF-M860P-000 |
| PIN,LOCATE | KYD-MCN3N-000 |
| NOZZLE(HB04C) | KYB-M7721-100 |
| GEAR | KYD-MC21U-000 |
| Fuji Packing | PH00991 |
| NOZZLE(FA06) | KYB-M77F6-000 |
| NOZZLE(VC74) | KYK-M7725-000 |
| SENSOR,PELEC | KYL-M86HL-000 |
| ETC MOTOR | PK2K93S-2D |
| SONY NOZZEL AF12082 | AF12082 |
| LEVER | KYB-M3T22-000 |
| HNS,EXT-POWER-FDR | KYB-M370R-000 |
| GERA(HASUBA) | KYD-MC131-000 |
| FEEDER CABLE | KYL-M869D-000 |
| UNIT-DRIVER | KYK-M861A-000 |
| SPRING | P/N:0730C-0252 |
| G5S ASSY_SHAFT | KYB-M700V-000 |
| PIN,HINGE | KYD-MC61N-000/216D0472/6301305042 |
| ASSY GEAR | KYD-MC20K-000/0926220R |
| FAN | 1204KL-04W-B59 |
| SONY1000 FILTER | 4-761-920-01 |
| MOTOR_DC | KYD-MC410-000 |
| WASHER | 90990-37J010 |
| ASSY_TENSION | KYD-MC21N-000 |
| GEAR | KYD-MC424-000/223E0481 |
| GXH X AXIS GUIDE | GXH X AXIS GUIDE |
| BELT | 00200341-01 |
| BLOCK | KYL-M86KC-000/211G5472 |
| HOLDER | KYB-M702F-000/0916DK2D |
| SPRING_COMP | KYD-MC3T-000 |
| NOZZLE | HG53G |
| PIN_HINGE | KYD-MC42S-000 |
| ETC INDUCTION MOTOR | PKRK93S-2A |
| COVER(MAK1-2) | KYD-MC11X-000 |
| NOZZLE_HG82C | KYA-M7708-000 |
| DISK | KYB-M3T1A-000 |
| GUIDE LINER ASSY. | KYL-M866D-000 |
| RETAINING RING,EXTERNAL | 0125-ERRING-E |
| ACCESSORY,SV | KYL-M861C-000 |
| LINE-SENSOR | KYF-M8607-000 |
| ASSY,SPRING,FLAT | KYM-M862H-000/6301592541 |
| VALVE | SY3120-MZD-C6-F2 |
| ASSY_GEAR | KYD-MC412-000 |
| AIR_LINE_EQPT | KYB-M704D-000 |
| SPRING COMP | KYD-MC13T-000 |
| RT BELT | 3-212-264-01 |
| 16mm FEEDER JIG TAPE | KYH-M8603-00 |
| NOZZLE(FA05) | KYB-M77F5-000 |
| 1220 NOZZLE | 51305323 |
| GEAR | KYD-MC23C-000/6301352305 |
| POWER SUPPLY | 1-474-020-11 |
| NOZZLE_HV19C | KYA-M7719-000 |
| SENSOR-PELEC | KYK-M861Y-000 |
| PIN_LOCATE | KYD-MC132-000 |
| PULLEY,FLAT GXH | KYL-M8681-000 |
| GUIDE | KYD-MC11T-000 |
| TORX FLAT HEAD 3*5 | P/N:M03X05-TFHS |
| NOZZLE(WC01) | KYB-M77W1-100 |
| UNIT,I/O | KYL-M86LV-000 |
| BOLT,HEX-SCT 630 000 7527 | 91317-03010 |
| HNS,LIGHTING | KYF-M861W-000 |
| UNIT,DRIVER | KYK-M860K-000 |
| BELT | 6*3080*0.9 mm |
| GREASE GUN KH-35 | KXF08V7AA00 |
| PIPE FITTING | 630 048 4656 |
| TIMING BELT | KYB-M919E-000 |
| CPK JG0250 | CPK JG0250 |
| BUCK_UP_PIN | KYA-M3802-000 |
| SEAL | KYB-M702B-000 |
| ASSY_HOOK | KYD-MC10T-000/016J0024 |
| SEAL | KYB-M704E-000 |
| BOTTON | ZB6-EB3B |
| NPM 226CS NOZZLE | N610040783AB |
| NOZZLE(HB03C) | KYB-M7720-100 |
| 360F NOZZLE | 45466917 |
| ARM STEEL | N210007284AB |
| NPM 8头 NOZZLE HOLDER | N610067607AE |
| BOLT_HEX-SCT | 90990-01J142 M3*12 |
| CLAMP_GUM | KYB-M3T1R-000/0920H153 |
| SLIP RING | KYB-M7027-000 |
| NPM 12*16 FEEDER | KXFW1KSCA00 |
| PIN_HINGE | KYD-MC41U-000 |
| BOLT-HEX-SCT | 90990-01J135 M2.5*6 |
| GEAR | KYD-MC153-00 |
| PIN_LOCATE | KYD-MC137-000 |
| SPRING_COMP | KYB-M91CS-000 |
| CYLINDER | KYL-M869A-000 |
| BUSH,BEARING | KYB-M3T3S-000 |
| MOTOR_AC-SERVO | KYF-M860D-000 |
| ASSY_GEAR | KYD-MC40F-000 |
| SPRING_COMP | KYD-MCN41-000 |
| NOZZLE(Y TYPE) | KYB-M382A-000 |
| CAM_FOLLOWER | KYA-M912N-000 |
| BOLT,HEX-SCT 630 000 7664 | 91317-04020 |
| GUIDE,LINEAR | LWHD12X3 |
| 935 NOZZLE | 00346524-03 |
| UNIT-IO(DOM4G) | KYF-M8602-000 |
| SPRING_COMP | KYD-MC129-000 |
| VALVE | 2-673-684-01 |
| ASSY_NOZZLE(BA05) | KYB-M77A5-B00 |
| PLATE | KYA-M3804-000 |
| MICRO METER | 350-251-30 |
| ASSY_LEVER | KYD-MC212-000 |
| BM02 NOZZLE | BM02 |
| LEVER(SUP) | KYD-MC20D-000 |
| COUPLING | KYB-M7116-000 |
| GEAR | KYU-M868B-000 |
| NOZZLE_HV14C | KYA-M7714-000 |
| COGNEX BOARD | KYK-M86PW-000 |
| BOLT,HEX-SCT 630 000 7503 | 91317-03006 |
| ASSY,LEVER | KYM-M8648-000 |
| NOZZLE_HG52C | KYA-M7705-000 |
| SONY NOZZLE | CF25200 |
| ASSY,SPROCKET | KYM-M862A-000 |
| GREASE FOR PANASONIC | N510048188AA |
| COUPLING | KYB-M702C-000 |
| 32mm FEEDER JIG TAPE | KYH-M8604-000 |
| NOZZLE_HV13C | KYA-M7713-000 |
| NPM H8 SENSON | N510048691AA |
| ROLLER(B) | KYK-M86EM-000 |
| PCB-MOUNT | KYK-M861W-000 |
| UNIT_DRIVER | KYK-M860F-000 |
| BELT | N510065133AA |
| CASE-CONN | KYF-M860Y-000 |
| HV31 NOZZLE | KYL-M7718-000 |
| GXH SPECIAL NOZZLE | 13053 |
| NOZZLE(BA06) | KYB-M77A6-000 |
| SENSOR,PELEC | KYL-M8609-000 |
| GEAR | KYK-M864C-000 |
| ASSY_PLATE(MAGNET) | KYD-MC115-000 |
| B-234 NOZZLE | 47561103-B-234 |
| CAM FOLLOWER | KYB-M704A-000 |
| SPRING COMP | KYD-MC422-000 |
| V8V11 (MOTOR_HL) | KYA-M700S-000 |
| 222L0935 Sigma-G5 Y AXIS GUIDE_LINEAR | KYF-M867L-000 |
| GEAR | KYD-MC23C-00 |
| COVER(RB) | KYD-MC10L-000 |
| 904 NOZZLE | Y074-V904-0015 |
| PULLEY_TIMING | KYB-M91AL-000 |
| ASSY_NOZZLE(VA06) | KYK-M7720-A00 |
| PIN-GAUGE | KXF00YHUA00 |
| GXH-1 FILTER | KYL-M860S-000 |
| BOLT,HEX-SCT 6300007626 | 91317-04010 |
| YG12 BELT | KHY-M9129-10 |
| FUSH-SPECIAL | KYF-M860F-000 |
| GUIDE,LINEAR | KYK-M86LE-001 |
| HNS,CONV-MOT-R | KYB-M9143-000 |
| ASSY GRIP | KYD-MC21H-000 |
| NPM 230C NOZZLE | N610040784AD |
| GUIDE,LINEAR | KYK-M86KY-000 |
| PCBA FIXTURE | FC150-130-60 |
| NPM 256CS NOZZLE | NPM 256CS NOZZLE |
| SDD Hard Disk | N610059692AA |
| P/N:JG000912 8mm | P/N:JG000912 8mm |
| COVER(HIRA-1) | KYD-MC20X-000 |
| CYLINDER | KYK-M8629-000/KYB-M919H-000 |
| NPM 235C NOZZLE | N610043814AD |
| WASHER | 92902-03200 |
| 8mm FEEDER JIG TAPE | KYH-M8601-00 |
| ROCK | 2-149-675-01 |
| SLIP RING | KYB-M7027-000 |
| NPM 235CS NOZZLE | N610043815AA |
| TOOL | N510031628AA |
| NPM X479 VALVE | N510054843AA |
| ASSY,HOOK | KYD-MC40A-000 |
| SEAL | KYT-M862W-000 |
| TAIL PIVOT | P/N:0740C-0109 |
| DEK SQUEEGE | DEK-03T 长25CM |
| ASSY,GEAR | KYM-M862C-000 |
| NPM FILTER | N610097899AA |
| SONY NOZZEL | AF10071 |
| ASSY,GUIDE,LINEAR | KYL-M861U-000 |
| BLOCK | KYF-M867D-000 |
| BOLT,HEX.SOCKET HEAD | KYK-M86NS-000 |
| COVER(LB) | KYM-M8657-000 |
| NOZZLE FILTER(10K) | KYF-M8645-000 |
| POWER SUPPLY | 11632XA |
| ECLIP,0625 | P/N:0062-ECLIP-E |
| SHAFT ASSY. | N510054811AA/N510069637AA |
| NOZZLE_SHAFT | KYF-M8619-000 |
| NOZZLE HG33C SET 15 | KYA-M8C07-100 |
| VALVE | 4-187-212-01 |
| FILTER | K46-M8527-COX |
| HELICAL SPRING | N210068065AA |
| ASSY_LEVER(L) | KYD-MC11M-000 |
| KIC ON BOARD | 6-10 CHANEL |
| ASSY_GEAR (8mm) | KYD-MC12L-000/1016120W |
| MACHINE SCREW | KYD-MC14G-000 |
| NPM 240C NOZZLE | N610062681AD |
| ASSY_GEAR | KYD-MC11A-000 |
| BOLT,HEX.SOCKET HEAD | 91312-03004 |
| BUSH,BEARING | KYB-M3T3R-000 |
| MOTOR_DC | KYD-MCN2G-000 |
| AIR_LINE_EQPT | KYB-M704D-000 |
| PCB-MOUNT G5 CUP2 | KYF-M868C-000 |
| BRACKET | KYL-M86KD-000/211FC709 |
| 937 NOZZLE | 00322591-06 |
| LEVER | KYB-M3T01-000 |
| DRIVER | N510002593AA |
| SHROUDED POGO BLOCK | 0938A-0007 |
| NPM 230CS NOZZLE | N610040788AD |
| 340F NOZZLE | 45466934 |
| MOTOR,AC-SERVO | KYL-M8625-000 |
| FUSE | KYL-M86KH-000 |
| 234F NOZZLE | 45466931 |
| PLATE | N610014970AE |
| NOZZLE (U TYPE) | KYB-M3828-000 |
| ASSY GEAR | KYD-MC211-000 |
| GXH Y AXIS GUIDE | GXH Y AXIS GUIDE |
| FEEDER | GD38080 |
| GEAR(Feeder GEAR) | KYD-MC130-000/1016B209 |
| F8 SENSOR-PELEC | KYF-M8609-000 |
| BELT | 00334936S01 |
| BELT | N510060977AA |
| GEAR | 4-719-921-02 |
| LEVER | KYB-M3T33-000 |
| PIN,HINGE | KYB-M3T2Y-000 |
| ASSY_LEVER(R) | KYD-MC11N-000 |
| ASSY_SPRING_FL | KYD-MC20U-000 |
| HOLDER | KYB-M701R-000 |
| Fuji Filter | AA1FZ04 |
| DSP-2008K SQUEEGE | L:20CM |
| ASSY_VALVE_F | KYB-M3J0X-000 |
| ASSY_NOZZLE(BC02) | KYB-M77C2-B00 |
| BALL | 4-719-920-01 |
| TAIL PIVOT BEARING | P/N:0740C-0110 |
| NPM H16 SENSON | N510054833AA |
| WASHER | 92902-03100 |
| GS-FB100 VIBRATION FEEDER | KYD-MCHA0-R00 |
| ASSY_NOZZLE(VA05) | KYK-M770J-A00 |
| MOTOR_AC-SERVO | KYK-M86T6-000 |
| BELT TIMING | KYA-M9152-000 |
| NPM 8mm FEEDER | KXFW1S5A00 |
| SONY MOTHER BOARD | 1-797-651-12 |
| NOZZLE(FF01) | KYB-M77F1-000 |
| ETC MOTOR PKRK93S-2 | 2P 300W |
| COVER ASSY | X-4700-067-4 |
| ASSY_VACUUM_VALVE | KYB-M7034-000 |
| YG12F BELT | KHY-M9129-00 |
About Us
Merex Techonologies Co.,Ltd
In 2016, Shenzhen merex Technology Co., Ltd. was established to build a more timely and effective
communication platform, and realize the company's service tenet of serving leading customers.
The engineers of the company are professional technicians who have been certified by the original
factory for more than 10 years. They always adhere to the value of putting the interests of customers
first, and provide customers with high-quality equipment accessories, consumables, fixtures and
technical support services.
In order to effectively reduce the cost of customers, the company set up a machining plant, and
changed most of the feeder parts to self-produced parts, so as to ensure sufficient inventory and
reduce the cost of customers at the same time
SMT technical service - 20 years
SMT parts sales - 18 years
Export to foreign customers - 6 years
Fixture development and manufacturing - 5 years
It is precisely because meire technology has the following advantages over the same industry that
more and more customers choose meire as their preferred supplier.
Professional pre-sales advice support
Excellent after-sales technical service
One stop solution for SMT accessories
Flexible payment and return policy
Stock in the factory with sufficient stock and fast delivery
Merex is a professional company engaged in SMT one-stop technical services, mainly engaged
in Hitachi, Yamaha, Panasonic and other SMT equipment and accessories, with a professional
after-sales service team, committed to rapid, efficient and low-cost solutions to all kinds of SMT
problems encountered by customers in production. In addition, the company also developed
automatic feeder calibrator, Cpk test fixture and other related products, and obtained national
patents. Welcome agent!
All engineering personnel of Merex are trained by the original factory, with advanced testing
instruments and a full set of technical documents. The average SMT related work experience
is more than 15 years, so our response speed and technology are better than others
Merex pursues the quality and details of the mechanism, and strives to deliver every product
to customers as a top-quality product. No matter domestic or overseas customers, we have
unified standards. If there are problems occasionally, we promise to deliver goods first to
minimize the loss caused by downtime.
