Active Member
|
[China]
Address: Unit 919 of Yagang BLDG, Fu'an Avenue，Pinghu，Longgang，Shenzhen，China
Contact name:Ma
shenzhen merex technology co.,ltd |
|
|
211AE211 / KYD-MC60S-000 / 6301776446 COVER(HIRA-1) Smt Feeder Parts for Hitachi
| Part No | 211AE211 / KYD-MC60S-000 / 6301776446 |
| Part Name | COVER(HIRA-1) |
| Condition | Compatiable new |
| Material | Steel |
| Usage | Hitachi machine |
| Type | Smt Feeder part |
Hot sale stock list:
| AIR_LINE_EQPT | KYB-M704D-000 |
| CLAMP_GUM | KYB-M3T1R-000/0920H153 |
| DEK POWER SUPPLY | V6G00KZ/185312 |
| BELT | N510060977AA |
| ASSY,SPROCKET | KYM-M862A-000 |
| CASE-CONN | KYF-M860Y-000 |
| NOZZLE_HG33C | KYA-M7703-000 |
| SPRING COMP | KYD-MC422-000 |
| HNS,EXT-POWER-FDR | KYB-M370R-000 |
| MOTOR_DC | KYD-MCN2G-000 |
| UNIT_DRIVER | KYK-M860F-000 |
| SPRING_COMP | KYD-MCN41-000 |
| SPRING_COMP | KYD-MC3T-000 |
| SONY1000 FILTER | 4-761-920-01 |
| NOZZLE(VC74) | KYK-M7725-000 |
| GEAR | 4-719-921-02 |
| BOLT_HEX-SCT | 90990-01J142 M3*12 |
| SEAL | KYT-M862W-000 |
| MICRO METER | 350-251-30 |
| GEAR | KYD-MC23C-000/6301352305 |
| NPM 240C NOZZLE | N610062681AD |
| PIN,LOCATE | KYD-MCN3N-000 |
| VALVE | SY3120-MZD-C6-F2 |
| BELT | N510021326AA |
| MOTOR | KYA-M700R-000 |
| BOLT_HEX-SCT | 90990-06J009 M4*20 |
| ASSY_LEVER | KYD-MC212-000 |
| PULLEY,FLAT GXH | KYL-M8681-000 |
| 360F NOZZLE | 45466917 |
| BOLT,HEX-SCT 630 000 7664 | 91317-04020 |
| NPM H16 SHAFT | N510064335AA |
| TAIL PIVOT BEARING | P/N:0740C-0110 |
| SEAL | KYB-M704E-000 |
| GEAR(Feeder GEAR) | KYD-MC130-000/1016B209 |
| NOZZLE_SHAFT | KYF-M8619-000 |
| GT-24040B FEEDER | KYD-MCN00-00 |
| NOZZLE (U TYPE) | KYB-M3828-000 |
| SONY E1000 FILTER | 4-761-920-01 |
| V8V11 (MOTOR_HL) | KYA-M700S-000 |
| BLOCK L3 | KYB-M960C-000 |
| MOTOR,AC-SERVO | KYF-M860P-000 |
| RETAINING RING,EXTERNAL | 0125-ERRING-E |
| PIN_LOCATE | KYD-MC132-000 |
| ASSY_TENSION | KYD-MC21N-000 |
| NOZZLE_HV13C | KYA-M7713-000 |
| UNIT,DRIVER | KYK-M860K-000 |
| NOZZLE_HV19C | KYA-M7719-000 |
| ETC MOTOR PKRK93S-2 | 2P 300W |
| SI -F130 REC PLUNGER KIT | A-1067-852-A |
| ASSY,LEVER | KYM-M864H-000 |
| GEAR | KYD-MC153-00 |
| PIN_GUIDE | KYB-M122F-000/216F0879 |
| NPM H16 SENSON | N510054833AA |
| NOZZLE(FA05) | KYB-M77F5-000 |
| GXH Y AXIS GUIDE | GXH Y AXIS GUIDE |
| NOZZLE(Y TYPE) | KYB-M382A-000 |
| FEEDER CABLE | KYL-M869D-000 |
| SENSOR | KYF-M8681-000 |
| FAN | 1204KL-04W-B59 |
| I/O CABLE,WIDE | 0938A-1007 |
| SPRING_COMP | KYB-M91CS-000 |
| FUSE | KYL-M86KH-000 |
| BUCK_UP_PIN | KYA-M3802-000 |
| SHAFT ASSY. | N510054811AA/N510069637AA |
| NPM 8mm FEEDER | KXFW1S5A00 |
| ARM STEEL | N210007284AB |
| FUSH-SPECIAL | KYF-M860F-000 |
| BELT_TIMING | KYA-M914W-000 |
| GUIDE,LINEAR | KYK-M86LE-001 |
| HNS,CORD | KYL-M8621-000 |
| SONY NOZZEL | AF10071 |
| NPM 226CS NOZZLE | N610040783AB |
| COUPLING | KYK-M86AW-000 |
| TORX FLAT HEAD 3*5 | P/N:M03X05-TFHS |
| ASSY_VALVE_F | KYB-M3J0X-000 |
| ASSY_GEAR | KYD-MC412-000 |
| BM02 NOZZLE | BM02 |
| ASSY_NOZZLE(VA05) | KYK-M770J-A00 |
| COVER ASSY | X-4700-067-4 |
| SONY TRAY SHUTTER CYLINDER | 1-478-936-11/MXU16-20-M9N |
| POGO BLOCK | 0738A-0029 |
| MOTOR,AC-SERVO | KYL-M867G-000 |
| NOZZLE HG33C SET 15 | KYA-M8C07-100 |
| Special Nozzle SPO4R | Special Nozzle SPO4R |
| LEVER | KYK-M861V-000 |
| TIMING BELT | KYB-M919E-000 |
| BRACKET | KYL-M86KD-000/211FC709 |
| MOTOR_DC | KYD-MC410-000 |
| DSP-2008K SQUEEGE | L:20CM |
| BELT | N510065133AA |
| LEVER | KYK-M86LV-000 |
| BOLT-HEX-SCT | 90990-01J115 |
| 32mm FEEDER JIG TAPE | KYH-M8604-000 |
| GRIP | KYD-MC109-000 |
| NOZZLE(FA04) | KYB-M77F4-000 |
| GUIDE,LINEAR | LWHD12X3 |
| LEVER | KYB-M3T0M-000 |
| 904 NOZZLE | Y074-V904-0015 |
| F8 SENSOR-PELEC | KYF-M8609-000 |
| BUSH,BEARING | KYB-M3T3R-000 |
| SHAFT ASSY. | KYF-M864U-000 |
| BOLT,HEX-SCT 630 000 7527 | 91317-03010 |
| NPM 235C NOZZLE | N610043814AD |
| UNIT,I/O | KYL-M86LV-000 |
| FILTER | K46-M8527-COX |
| BOLT,HEX.SOCKET HEAD | KYK-M86NS-000 |
| ASSY_LEVER(R) | KYD-MC11N-000 |
| SONY NOZZLE | CF25200 |
| BOLT,HEX-SCT 630 000 7503 | 91317-03006 |
| WASHER | KYD-MC22H-00 |
| ASSY_PLATE(MAGNET) | KYD-MC115-000 |
| SONY MOTHER BOARD | 1-797-651-12 |
| SDD Hard Disk | N610059692AA |
| DD MOTOR | KYF-M860E-000 |
| VALVE | SY3240-5LZD |
| DISK | KYB-M3T1A-000 |
| PCBA FIXTURE | FC150-130-60 |
| PLATE | KYA-M3804-000 |
| ASSY,GEAR | KYM-M862C-000 |
| NPM 256CS NOZZLE | NPM 256CS NOZZLE |
| COVER(LB) | KYM-M8657-000 |
| ASSY GRIP | KYD-MC21H-000 |
| B-234 NOZZLE | 47561103-B-234 |
| GS-FB100 VIBRATION FEEDER | KYD-MCHA0-R00 |
| CYLINDER | KYL-M869A-000 |
| GXH X AXIS GUIDE | GXH X AXIS GUIDE |
| UNIT-IO(DOM4G) | KYF-M8602-000 |
| TAIL PIVOT | P/N:0740C-0109 |
| GUIDE,LINEAR | KYK-M86LE-001 |
| WASHER | 90990-37J010 |
| LEVER | KYB-M3T22-000 |
| DRIVER | N510002593AA |
| PCB-MOUNT | KYK-M861W-000 |
| 340F NOZZLE | 45466934 |
| NOZZLE | HG53G |
| BLOCK | KYF-M867D-000 |
| ASSY_NOZZLE(VA06) | KYK-M7720-A00 |
| MACHINE SCREW | KYD-MC14G-000 |
| 935 NOZZLE | 00346524-03 |
| YG12F BELT | KHY-M9129-00 |
| HELICAL SPRING | N210068065AA |
| NPM FILTER | N610097899AA |
| SPRING_COMP | KYD-MC129-000 |
| NOZZLE(WC01) | KYB-M77W1-100 |
| SLIP RING | KYB-M7027-000 |
| ASSY_GEAR (8mm) | KYD-MC12L-000/1016120W |
| 234F NOZZLE | 45466931 |
| GEAR | KYD-MC23C-00 |
| HV31 NOZZLE | KYL-M7718-000 |
| HNS,CONV-MOT-R | KYB-M9143-000 |
| SPRING COMP | KYD-MC13T-000 |
| COVER | KYK-M86RD-000 |
| BOLT,HEX-SCT 6300007626 | 91317-04010 |
| GXH SPECIAL NOZZLE | 13053 |
| CAM_FOLLOWER | KYA-M912N-000 |
| ASSY_BLOCK_TOP | KYD-M701U-000 |
| SEAL | KYB-M702B-000 |
| ASSY GEAR | KYD-MC20K-000/0926220R |
| NOZZLE(HB04C) | KYB-M7721-100 |
| ASSY_NOZZLE(BA05) | KYB-M77A5-B00 |
| NPM 8头 NOZZLE HOLDER | N610067607AE |
| COVER | KYM-M860X-000 |
| ASSY_SHAFT | KYF-M8651-000 |
| NOZZLE(FA06) | KYB-M77F6-000 |
| ASSY GEAR | KYD-MC211-000 |
| KIC ON BOARD | 6-10 CHANEL |
| BOLT,HEX.SOCKET HEAD | 91312-03004 |
| GXH-1 FILTER | KYL-M860S-000 |
| ASSY,SPRING,FLAT | KYM-M862H-000/6301592541 |
| NPM 185 NOZZLE | N610070338AB |
| UNIT-DRIVER | KYK-M861A-000 |
| COVER(HIRA-1) | KYD-MC20X-000 |
| BELT | 00334936S01 |
| ASSY,GUIDE,LINEAR | KYL-M861U-000 |
| ETC MOTOR | PK2K93S-2D |
| MOTOR_AC-SERVO | KYA-M700N-000 |
| ASSY,HOOK | KYD-MC40A-000 |
| PIN,HINGE | KYD-MC61N-000/216D0472/6301305042 |
| GREASE GUN KH-35 | KXF08V7AA00 |
| CASE-CONN | KYK-M860Y-000 |
| WASHER | 92902-03100 |
| FFU | MX--575-A |
| NPM 230CS NOZZLE | N610040788AD |
| GEAR | KYU-M868B-000 |
| COVER(RB) | KYD-MC10L-000 |
| GUIDE | KYD-MC11T-000 |
| ASSY_LEVER(L) | KYD-MC11M-000 |
| Encoder Read Head For Universal | 49566101 |
| PULLEY_TIMING | KYB-M91AL-000 |
| COVER(RB) | KYM-M8612-000 |
| PIN_LOCATE | KYD-MC137-000 |
| POWER SUPPLY | 1-474-020-11 |
| LINE-SENSOR | KYF-M8607-000 |
| ASSY_VACUUM_VALVE | KYB-M7034-000 |
| ASSY_SPRING_FL | KYD-MC20U-000 |
| SHROUDED POGO BLOCK | 0938A-0007 |
| 0603 CPK JIG CHIP(KOA) | KOA RK73Z1HTTC |
| SPRING | P/N:0730C-0252 |
| ETC INDUCTION MOTOR | PKRK93S-2A |
| MOTOR,AC-SERVO | KYL-M8625-000 |
| ASSY_CABLE | KYL-M86NC-000 |
| COVER(MAK1-2) | KYD-MC11X-000 |
| BUSH,BEARING | KYB-M3T3S-000 |
| ROLLER(B) | KYK-M86EM-000 |
| LEVER | KYB-M3T21-000 |
| P_RCG_SCOPE | KYB-M730B-000 |
| NPM 235CS NOZZLE | N610043815AA |
| Fuji Filter | AA1FZ04 |
| NOZZLE_HG52C | KYA-M7705-000 |
| NOZZLE(BA06) | KYB-M77A6-000 |
| GEAR | KYK-M864C-000 |
| CORD,BCR | KYF-M86NC-000 |
| NOZZLE HG52C set 15 | KYA-M8C07-200 |
| 937 NOZZLE | 00322591-06 |
| PIN,HINGE | KYD-MC41S-000 |
| SENSOR,PELEC | KYL-M8609-000 |
| PLATE | N610014970AE |
| NPM X479 VALVE | N510054843AA |
| NOZZLE(HB03C) | KYB-M7720-100 |
| ASSY_HOOK | KYD-MC10T-000/016J0024 |
| GREASE FOR PANASONIC | N510048188AA |
| PIPE FITTING | 630 048 4656 |
| NPM 230C NOZZLE | N610040784AD |
| PIN-GAUGE | KXF00YHTA00 |
| PCB-MOUNT G5 CUP2 | KYF-M868C-000 |
| POWER SUPPLY | 11632XA |
| MOTOR_AC-SERVO | KYF-M860D-000 |
| NPM H8 SENSON | N510048691AA |
| COUPLING | KYB-M702C-000 |
| LABEL FEEDER FOR HITACHI | GL-00100 |
| SONY NOZZEL AF12082 | AF12082 |
| G5S ASSY_SHAFT | KYB-M700V-000 |
| BLOCK | KYL-M86KC-000/211G5472 |
| MOTOR,AC-SERVO | KYK-M860P-000 |
| TOOL | N510031628AA |
| BOLT-HEX-SCT | 90990-01J135 M2.5*6 |
| BALL | 4-719-920-01 |
| ASSY_NOZZLE(BC02) | KYB-M77C2-B00 |
| VALVE | 2-673-684-01 |
| Y AXIS GUIDE | SSR5XW2UUC1+970LYH |
| ASSY,LEVER | KYM-M8648-000 |
| GEAR | KYD-MC21U-000 |
| ROCK | 2-149-675-01 |
| DEK SQUEEGE | DEK-03T 长25CM |
| GUIDE,LINEAR | KYK-M86KY-000 |
| HOLDER | KYB-M701R-000 |
| COGNEX BOARD | KYK-M86PW-000 |
| BOTTON | ZB6-EB3B |
| GUIDE LINER ASSY. | KYL-M866D-000 |
| GREASE | N990PANA-023 |
| BELT TIMING | KYA-M9152-000 |
| SENSOR,PELEC | KYL-M86HL-000 |
| CYLINDER | KYK-M8629-000/KYB-M919H-000 |
| ASSY_GEAR | KYD-MC11A-000 |
| SENSOR-PELEC | KYK-M861Y-000 |
| GUIDE,LINEAR | KYF-M867P-000 |
| 8mm FEEDER JIG TAPE | KYH-M8601-00 |
| CPK JG0250 | CPK JG0250 |
| COUPLING | KYB-M7116-000 |
| 16mm FEEDER JIG TAPE | KYH-M8603-00 |
| PIN_LOCATE | KYD-MC21Y-000 |
| NOZZLE(FF01) | KYB-M77F1-000 |
| GEAR | KYD-MC20K-00 |
| 1220 NOZZLE | 51305323 |
| BELT | 44548605 |
| NOZZLE_HV14C | KYA-M7714-000 |
| LEVER(SUP) | KYD-MC20D-000 |
| P/N:JG000912 8mm | P/N:JG000912 8mm |
| YG12 BELT | KHY-M9129-10 |
| PIN_HINGE | KYD-MC42S-000 |
| BELT | 6*3080*0.9 mm |
| LEVER | KYB-M3T01-000 |
| LEVER | KYB-M3T33-000 |
| 933 NOZZLE | 00346523-03 |
| COVER (12/16mm) | KYD-MC20Y-000 |
| AIR_LINE_EQPT | KYB-M704D-000 |
| GUIDE,LINEAR | KYK-M860S-000 |
| NOZZLE_HG82C | KYA-M7708-000 |
| PIN-GAUGE | KXF00YHUA00 |
| HNS,LIGHTING | KYF-M861W-000 |
| WASHER | 92902-03200 |
| PIN_HINGE | KYD-MC41U-000 |
| ASSY_SUPPRESSOR | KYD-MC10R-000 |
| ASSY_NOZZLE(BT06) | KYB-M77BA-A00 |
| LIGHTING_UNIT | KYB-M700T-000 |
| PIN,HINGE | KYB-M3T2Y-000 |
| PIN,HINGE | KYB-M3T31-000 |
| ECLIP,0625 | P/N:0062-ECLIP-E |
| SLIP RING | KYB-M7027-000 |
| BELT | 6*3080*0.9 mm |
| SENSOR,PELEC | KYK-M86DE-000 |
| FEEDER | GD38080 |
| ACCESSORY,SV | KYL-M861C-000 |
| HOLDER | KYB-M702F-000/0916DK2D |
| RT BELT | 3-212-264-01 |
| PIN,HINGE | KYL-M860R-000 |
| GEAR | KYD-MC424-000/223E0481 |
| GERA(HASUBA) | KYD-MC131-000 |
| GT38080 FEEDER | GT38080 FEEDER |
| NPM 12*16 FEEDER | KXFW1KSCA00 |
| BLOCK | KYA-M7027-000 |
| MOTOR_AC-SERVO | KYK-M86T6-000 |
| ASSY_GEAR | KYD-MC40F-000 |
| Fuji Packing | PH00991 |
| NOZZLE FILTER(10K) | KYF-M8645-000 |
| 938 NOZZLE | 00322592-05 |
| CAM FOLLOWER | KYB-M704A-000 |
| VALVE | 4-187-212-01 |
| 222L0935 Sigma-G5 Y AXIS GUIDE_LINEAR | KYF-M867L-000 |
About Us
Merex Techonologies Co.,Ltd
In 2016, Shenzhen merex Technology Co., Ltd. was established to build a more timely and effective
communication platform, and realize the company's service tenet of serving leading customers.
The engineers of the company are professional technicians who have been certified by the original
factory for more than 10 years. They always adhere to the value of putting the interests of customers
first, and provide customers with high-quality equipment accessories, consumables, fixtures and
technical support services.
In order to effectively reduce the cost of customers, the company set up a machining plant, and
changed most of the feeder parts to self-produced parts, so as to ensure sufficient inventory and
reduce the cost of customers at the same time
SMT technical service - 20 years
SMT parts sales - 18 years
Export to foreign customers - 6 years
Fixture development and manufacturing - 5 years
It is precisely because meire technology has the following advantages over the same industry that
more and more customers choose meire as their preferred supplier.
Professional pre-sales advice support
Excellent after-sales technical service
One stop solution for SMT accessories
Flexible payment and return policy
Stock in the factory with sufficient stock and fast delivery
Merex is a professional company engaged in SMT one-stop technical services, mainly engaged
in Hitachi, Yamaha, Panasonic and other SMT equipment and accessories, with a professional
after-sales service team, committed to rapid, efficient and low-cost solutions to all kinds of SMT
problems encountered by customers in production. In addition, the company also developed
automatic feeder calibrator, Cpk test fixture and other related products, and obtained national
patents. Welcome agent!
All engineering personnel of Merex are trained by the original factory, with advanced testing
instruments and a full set of technical documents. The average SMT related work experience
is more than 15 years, so our response speed and technology are better than others
Merex pursues the quality and details of the mechanism, and strives to deliver every product
to customers as a top-quality product. No matter domestic or overseas customers, we have
unified standards. If there are problems occasionally, we promise to deliver goods first to
minimize the loss caused by downtime.
