Active Member
|
[China]
Address: Unit 919 of Yagang BLDG, Fu'an Avenue，Pinghu，Longgang，Shenzhen，China
Contact name:Ma
shenzhen merex technology co.,ltd |
|
|
6301569888 / 023E0019 / KYM-M862C-000 ASSY GEAR SMT Feeder Parts for Hitachi
| Part No | 6301569888 / 023E0019 / KYM-M862C-000 |
| Part Name | ASSY GEAR |
| Condition | Compatible new |
| Material | Brass |
| Usage | Hitachi machine |
| Type | Smt Feeder part |
Hot sale stock list:
| SHAFT ASSY. | KYF-M864U-000 |
| SHAFT ASSY. | N510054811AA/N510069637AA |
| CAM FOLLOWER | KYB-M704A-000 |
| Fuji Filter | AA1FZ04 |
| VALVE | SY3240-5LZD |
| FAN | 1204KL-04W-B59 |
| ASSY_LEVER(L) | KYD-MC11M-000 |
| 234F NOZZLE | 45466931 |
| HOLDER | KYB-M701R-000 |
| YG12 BELT | KHY-M9129-10 |
| GUIDE LINER ASSY. | KYL-M866D-000 |
| 935 NOZZLE | 00346524-03 |
| 938 NOZZLE | 00322592-05 |
| BELT TIMING | KYA-M9152-000 |
| POWER SUPPLY | 11632XA |
| NPM FILTER | N610097899AA |
| Encoder Read Head For Universal | 49566101 |
| SPRING_COMP | KYD-MCN41-000 |
| POGO BLOCK | 0738A-0029 |
| COUPLING | KYB-M7116-000 |
| PIN,HINGE | KYB-M3T31-000 |
| NPM 235CS NOZZLE | N610043815AA |
| PIN,HINGE | KYB-M3T2Y-000 |
| TORX FLAT HEAD 3*5 | P/N:M03X05-TFHS |
| NPM 8头 NOZZLE HOLDER | N610067607AE |
| COVER(RB) | KYD-MC10L-000 |
| 222L0935 Sigma-G5 Y AXIS GUIDE_LINEAR | KYF-M867L-000 |
| NOZZLE FILTER(10K) | KYF-M8645-000 |
| ASSY_GEAR (8mm) | KYD-MC12L-000/1016120W |
| Y AXIS GUIDE | SSR5XW2UUC1+970LYH |
| DD MOTOR | KYF-M860E-000 |
| HOLDER | KYB-M702F-000/0916DK2D |
| VALVE | 4-187-212-01 |
| COUPLING | KYK-M86AW-000 |
| PIN_LOCATE | KYD-MC137-000 |
| SPRING COMP | KYD-MC422-000 |
| NOZZLE_HV14C | KYA-M7714-000 |
| ROLLER(B) | KYK-M86EM-000 |
| NPM 235C NOZZLE | N610043814AD |
| AIR_LINE_EQPT | KYB-M704D-000 |
| GREASE | N990PANA-023 |
| CYLINDER | KYL-M869A-000 |
| PIN,HINGE | KYD-MC41S-000 |
| BELT | 44548605 |
| ASSY_NOZZLE(BC02) | KYB-M77C2-B00 |
| SHROUDED POGO BLOCK | 0938A-0007 |
| BOLT-HEX-SCT | 90990-01J135 M2.5*6 |
| GT38080 FEEDER | GT38080 FEEDER |
| HV31 NOZZLE | KYL-M7718-000 |
| CASE-CONN | KYK-M860Y-000 |
| ASSY_SUPPRESSOR | KYD-MC10R-000 |
| BUSH,BEARING | KYB-M3T3R-000 |
| COVER(MAK1-2) | KYD-MC11X-000 |
| SONY MOTHER BOARD | 1-797-651-12 |
| GXH SPECIAL NOZZLE | 13053 |
| 937 NOZZLE | 00322591-06 |
| NPM 256CS NOZZLE | NPM 256CS NOZZLE |
| 8mm FEEDER JIG TAPE | KYH-M8601-00 |
| GT-24040B FEEDER | KYD-MCN00-00 |
| NOZZLE HG52C set 15 | KYA-M8C07-200 |
| ASSY,LEVER | KYM-M864H-000 |
| BELT | N510021326AA |
| ASSY,SPRING,FLAT | KYM-M862H-000/6301592541 |
| NPM 240C NOZZLE | N610062681AD |
| SPRING_COMP | KYD-MC129-000 |
| 360F NOZZLE | 45466917 |
| TAIL PIVOT | P/N:0740C-0109 |
| BM02 NOZZLE | BM02 |
| LIGHTING_UNIT | KYB-M700T-000 |
| I/O CABLE,WIDE | 0938A-1007 |
| GEAR(Feeder GEAR) | KYD-MC130-000/1016B209 |
| NOZZLE HG33C SET 15 | KYA-M8C07-100 |
| BRACKET | KYL-M86KD-000/211FC709 |
| LEVER | KYB-M3T0M-000 |
| BLOCK | KYA-M7027-000 |
| ASSY_GEAR | KYD-MC412-000 |
| BELT_TIMING | KYA-M914W-000 |
| BELT | N510060977AA |
| WASHER | 90990-37J010 |
| NPM H16 SHAFT | N510064335AA |
| PIN,LOCATE | KYD-MCN3N-000 |
| SEAL | KYB-M704E-000 |
| TIMING BELT | KYB-M919E-000 |
| COVER | KYM-M860X-000 |
| SDD Hard Disk | N610059692AA |
| ASSY_GEAR | KYD-MC11A-000 |
| MOTOR,AC-SERVO | KYL-M8625-000 |
| NOZZLE(VC74) | KYK-M7725-000 |
| BELT | N510065133AA |
| FFU | MX--575-A |
| COGNEX BOARD | KYK-M86PW-000 |
| LEVER(SUP) | KYD-MC20D-000 |
| SPRING COMP | KYD-MC13T-000 |
| ASSY_NOZZLE(VA05) | KYK-M770J-A00 |
| NPM H16 SENSON | N510054833AA |
| MOTOR_AC-SERVO | KYA-M700N-000 |
| BOLT,HEX-SCT 630 000 7503 | 91317-03006 |
| CAM_FOLLOWER | KYA-M912N-000 |
| UNIT-DRIVER | KYK-M861A-000 |
| PIN,HINGE | KYD-MC61N-000/216D0472/6301305042 |
| ASSY_GEAR | KYD-MC40F-000 |
| ASSY_CABLE | KYL-M86NC-000 |
| RETAINING RING,EXTERNAL | 0125-ERRING-E |
| PIN-GAUGE | KXF00YHTA00 |
| NPM 226CS NOZZLE | N610040783AB |
| PIN_GUIDE | KYB-M122F-000/216F0879 |
| LEVER | KYB-M3T33-000 |
| ASSY_NOZZLE(BA05) | KYB-M77A5-B00 |
| BOLT,HEX-SCT 630 000 7664 | 91317-04020 |
| NOZZLE(WC01) | KYB-M77W1-100 |
| G5S ASSY_SHAFT | KYB-M700V-000 |
| SPRING | P/N:0730C-0252 |
| NOZZLE(FA06) | KYB-M77F6-000 |
| PIN_HINGE | KYD-MC41U-000 |
| BELT | 6*3080*0.9 mm |
| CASE-CONN | KYF-M860Y-000 |
| GUIDE,LINEAR | LWHD12X3 |
| ECLIP,0625 | P/N:0062-ECLIP-E |
| SENSOR | KYF-M8681-000 |
| BOLT_HEX-SCT | 90990-06J009 M4*20 |
| YG12F BELT | KHY-M9129-00 |
| 16mm FEEDER JIG TAPE | KYH-M8603-00 |
| ASSY_LEVER | KYD-MC212-000 |
| BOLT,HEX.SOCKET HEAD | 91312-03004 |
| LINE-SENSOR | KYF-M8607-000 |
| TOOL | N510031628AA |
| ETC MOTOR | PK2K93S-2D |
| COUPLING | KYB-M702C-000 |
| BELT | 00334936S01 |
| NOZZLE_HV13C | KYA-M7713-000 |
| HNS,LIGHTING | KYF-M861W-000 |
| COVER | KYK-M86RD-000 |
| CYLINDER | KYK-M8629-000/KYB-M919H-000 |
| SLIP RING | KYB-M7027-000 |
| GEAR | KYD-MC23C-000/6301352305 |
| WASHER | 92902-03200 |
| GEAR | 4-719-921-02 |
| MOTOR_DC | KYD-MCN2G-000 |
| RT BELT | 3-212-264-01 |
| HNS,CONV-MOT-R | KYB-M9143-000 |
| SONY1000 FILTER | 4-761-920-01 |
| BOLT,HEX.SOCKET HEAD | KYK-M86NS-000 |
| PCB-MOUNT G5 CUP2 | KYF-M868C-000 |
| LEVER | KYB-M3T22-000 |
| ASSY GRIP | KYD-MC21H-000 |
| LABEL FEEDER FOR HITACHI | GL-00100 |
| GERA(HASUBA) | KYD-MC131-000 |
| HELICAL SPRING | N210068065AA |
| TAIL PIVOT BEARING | P/N:0740C-0110 |
| MOTOR_AC-SERVO | KYK-M86T6-000 |
| PIN-GAUGE | KXF00YHUA00 |
| SI -F130 REC PLUNGER KIT | A-1067-852-A |
| NOZZLE_HG33C | KYA-M7703-000 |
| FUSE | KYL-M86KH-000 |
| GREASE GUN KH-35 | KXF08V7AA00 |
| DEK SQUEEGE | DEK-03T 长25CM |
| NOZZLE(FA04) | KYB-M77F4-000 |
| HNS,EXT-POWER-FDR | KYB-M370R-000 |
| NOZZLE_SHAFT | KYF-M8619-000 |
| NOZZLE(HB04C) | KYB-M7721-100 |
| GUIDE | KYD-MC11T-000 |
| PLATE | N610014970AE |
| 340F NOZZLE | 45466934 |
| BUSH,BEARING | KYB-M3T3S-000 |
| BLOCK | KYF-M867D-000 |
| ASSY_SPRING_FL | KYD-MC20U-000 |
| GEAR | KYD-MC21U-000 |
| ASSY_TENSION | KYD-MC21N-000 |
| PIN,HINGE | KYL-M860R-000 |
| BOLT,HEX-SCT 6300007626 | 91317-04010 |
| NOZZLE(Y TYPE) | KYB-M382A-000 |
| VALVE | SY3120-MZD-C6-F2 |
| FEEDER | GD38080 |
| 933 NOZZLE | 00346523-03 |
| WASHER | 92902-03100 |
| GXH-1 FILTER | KYL-M860S-000 |
| ETC INDUCTION MOTOR | PKRK93S-2A |
| PULLEY,FLAT GXH | KYL-M8681-000 |
| MICRO METER | 350-251-30 |
| GUIDE,LINEAR | KYK-M86KY-000 |
| ASSY_LEVER(R) | KYD-MC11N-000 |
| NOZZLE_HG52C | KYA-M7705-000 |
| HNS,CORD | KYL-M8621-000 |
| V8V11 (MOTOR_HL) | KYA-M700S-000 |
| COVER(HIRA-1) | KYD-MC20X-000 |
| ASSY_NOZZLE(BT06) | KYB-M77BA-A00 |
| 1220 NOZZLE | 51305323 |
| GEAR | KYD-MC20K-00 |
| KIC ON BOARD | 6-10 CHANEL |
| Fuji Packing | PH00991 |
| MOTOR_AC-SERVO | KYF-M860D-000 |
| DRIVER | N510002593AA |
| GXH X AXIS GUIDE | GXH X AXIS GUIDE |
| PIN_HINGE | KYD-MC42S-000 |
| NPM 230C NOZZLE | N610040784AD |
| PCBA FIXTURE | FC150-130-60 |
| DEK POWER SUPPLY | V6G00KZ/185312 |
| POWER SUPPLY | 1-474-020-11 |
| UNIT-IO(DOM4G) | KYF-M8602-000 |
| ASSY,LEVER | KYM-M8648-000 |
| SENSOR,PELEC | KYK-M86DE-000 |
| BELT | 6*3080*0.9 mm |
| GUIDE,LINEAR | KYF-M867P-000 |
| NPM 185 NOZZLE | N610070338AB |
| ARM STEEL | N210007284AB |
| GEAR | KYU-M868B-000 |
| SONY TRAY SHUTTER CYLINDER | 1-478-936-11/MXU16-20-M9N |
| ASSY_VACUUM_VALVE | KYB-M7034-000 |
| F8 SENSOR-PELEC | KYF-M8609-000 |
| FEEDER CABLE | KYL-M869D-000 |
| FUSH-SPECIAL | KYF-M860F-000 |
| UNIT,I/O | KYL-M86LV-000 |
| CORD,BCR | KYF-M86NC-000 |
| PULLEY_TIMING | KYB-M91AL-000 |
| SEAL | KYB-M702B-000 |
| SENSOR-PELEC | KYK-M861Y-000 |
| PLATE | KYA-M3804-000 |
| DISK | KYB-M3T1A-000 |
| LEVER | KYK-M861V-000 |
| NOZZLE(FF01) | KYB-M77F1-000 |
| GRIP | KYD-MC109-000 |
| ASSY_NOZZLE(VA06) | KYK-M7720-A00 |
| ROCK | 2-149-675-01 |
| ETC MOTOR PKRK93S-2 | 2P 300W |
| BLOCK L3 | KYB-M960C-000 |
| MACHINE SCREW | KYD-MC14G-000 |
| NOZZLE (U TYPE) | KYB-M3828-000 |
| GUIDE,LINEAR | KYK-M86LE-001 |
| ASSY,GUIDE,LINEAR | KYL-M861U-000 |
| GXH Y AXIS GUIDE | GXH Y AXIS GUIDE |
| NPM 12*16 FEEDER | KXFW1KSCA00 |
| SPRING_COMP | KYB-M91CS-000 |
| NOZZLE(BA06) | KYB-M77A6-000 |
| MOTOR,AC-SERVO | KYF-M860P-000 |
| ASSY,GEAR | KYM-M862C-000 |
| SONY NOZZEL AF12082 | AF12082 |
| COVER ASSY | X-4700-067-4 |
| FILTER | K46-M8527-COX |
| BALL | 4-719-920-01 |
| CLAMP_GUM | KYB-M3T1R-000/0920H153 |
| BOLT,HEX-SCT 630 000 7527 | 91317-03010 |
| NOZZLE_HV19C | KYA-M7719-000 |
| ASSY,HOOK | KYD-MC40A-000 |
| LEVER | KYK-M86LV-000 |
| GEAR | KYD-MC153-00 |
| SENSOR,PELEC | KYL-M86HL-000 |
| ASSY_PLATE(MAGNET) | KYD-MC115-000 |
| NOZZLE | HG53G |
| P_RCG_SCOPE | KYB-M730B-000 |
| MOTOR_DC | KYD-MC410-000 |
| ACCESSORY,SV | KYL-M861C-000 |
| SONY E1000 FILTER | 4-761-920-01 |
| BUCK_UP_PIN | KYA-M3802-000 |
| SENSOR,PELEC | KYL-M8609-000 |
| COVER(RB) | KYM-M8612-000 |
| NPM 230CS NOZZLE | N610040788AD |
| PIPE FITTING | 630 048 4656 |
| P/N:JG000912 8mm | P/N:JG000912 8mm |
| NPM 8mm FEEDER | KXFW1S5A00 |
| COVER (12/16mm) | KYD-MC20Y-000 |
| MOTOR,AC-SERVO | KYK-M860P-000 |
| 32mm FEEDER JIG TAPE | KYH-M8604-000 |
| BOLT-HEX-SCT | 90990-01J115 |
| Special Nozzle SPO4R | Special Nozzle SPO4R |
| 0603 CPK JIG CHIP(KOA) | KOA RK73Z1HTTC |
| ASSY GEAR | KYD-MC20K-000/0926220R |
| GS-FB100 VIBRATION FEEDER | KYD-MCHA0-R00 |
| ASSY GEAR | KYD-MC211-000 |
| AIR_LINE_EQPT | KYB-M704D-000 |
| GREASE FOR PANASONIC | N510048188AA |
| GEAR | KYD-MC23C-00 |
| NPM X479 VALVE | N510054843AA |
| NPM H8 SENSON | N510048691AA |
| COVER(LB) | KYM-M8657-000 |
| WASHER | KYD-MC22H-00 |
| GEAR | KYK-M864C-000 |
| BOLT_HEX-SCT | 90990-01J142 M3*12 |
| ASSY_SHAFT | KYF-M8651-000 |
| VALVE | 2-673-684-01 |
| NOZZLE_HG82C | KYA-M7708-000 |
| 904 NOZZLE | Y074-V904-0015 |
| GUIDE,LINEAR | KYK-M860S-000 |
| ASSY_VALVE_F | KYB-M3J0X-000 |
| SONY NOZZLE | CF25200 |
| GUIDE,LINEAR | KYK-M86LE-001 |
| ASSY,SPROCKET | KYM-M862A-000 |
| PCB-MOUNT | KYK-M861W-000 |
| B-234 NOZZLE | 47561103-B-234 |
| UNIT,DRIVER | KYK-M860K-000 |
| LEVER | KYB-M3T21-000 |
| NOZZLE(FA05) | KYB-M77F5-000 |
| PIN_LOCATE | KYD-MC21Y-000 |
| CPK JG0250 | CPK JG0250 |
| SONY NOZZEL | AF10071 |
| MOTOR | KYA-M700R-000 |
| SLIP RING | KYB-M7027-000 |
| MOTOR,AC-SERVO | KYL-M867G-000 |
| PIN_LOCATE | KYD-MC132-000 |
| UNIT_DRIVER | KYK-M860F-000 |
| BLOCK | KYL-M86KC-000/211G5472 |
| DSP-2008K SQUEEGE | L:20CM |
| ASSY_BLOCK_TOP | KYD-M701U-000 |
| SPRING_COMP | KYD-MC3T-000 |
| NOZZLE(HB03C) | KYB-M7720-100 |
| SEAL | KYT-M862W-000 |
| ASSY_HOOK | KYD-MC10T-000/016J0024 |
| LEVER | KYB-M3T01-000 |
| BOTTON | ZB6-EB3B |
| GEAR | KYD-MC424-000/223E0481 |
| BELT | 00200341-01 |
About Us
Merex Techonologies Co.,Ltd
In 2016, Shenzhen merex Technology Co., Ltd. was established to build a more timely and effective
communication platform, and realize the company's service tenet of serving leading customers.
The engineers of the company are professional technicians who have been certified by the original
factory for more than 10 years. They always adhere to the value of putting the interests of customers
first, and provide customers with high-quality equipment accessories, consumables, fixtures and
technical support services.
In order to effectively reduce the cost of customers, the company set up a machining plant, and
changed most of the feeder parts to self-produced parts, so as to ensure sufficient inventory and
reduce the cost of customers at the same time
SMT technical service - 20 years
SMT parts sales - 18 years
Export to foreign customers - 6 years
Fixture development and manufacturing - 5 years
It is precisely because meire technology has the following advantages over the same industry that
more and more customers choose meire as their preferred supplier.
Professional pre-sales advice support
Excellent after-sales technical service
One stop solution for SMT accessories
Flexible payment and return policy
Stock in the factory with sufficient stock and fast delivery
Merex is a professional company engaged in SMT one-stop technical services, mainly engaged
in Hitachi, Yamaha, Panasonic and other SMT equipment and accessories, with a professional
after-sales service team, committed to rapid, efficient and low-cost solutions to all kinds of SMT
problems encountered by customers in production. In addition, the company also developed
automatic feeder calibrator, Cpk test fixture and other related products, and obtained national
patents. Welcome agent!
All engineering personnel of Merex are trained by the original factory, with advanced testing
instruments and a full set of technical documents. The average SMT related work experience
is more than 15 years, so our response speed and technology are better than others
Merex pursues the quality and details of the mechanism, and strives to deliver every product
to customers as a top-quality product. No matter domestic or overseas customers, we have
unified standards. If there are problems occasionally, we promise to deliver goods first to
minimize the loss caused by downtime.
