Active Member
|
[China]
Address: Unit 919 of Yagang BLDG, Fu'an Avenue，Pinghu，Longgang，Shenzhen，China
Contact name:Ma
shenzhen merex technology co.,ltd |
|
|
KW1-M111A-00X SPRING SMT Feeder Parts for YAMAHA Feeder
| Part No | KW1-M111A-00X |
| Part Name | Spring |
| Condition | Compatible new |
| Material | iron |
| Usage | Hitachi machine |
| Type | Smt Feeder part |
Hot sale stock list:
| ASSY_NOZZLE(VA06) | KYK-M7720-A00 |
| NOZZLE_HG82C | KYA-M7708-000 |
| 360F NOZZLE | 45466917 |
| SLIP RING | KYB-M7027-000 |
| ASSY_PLATE(MAGNET) | KYD-MC115-000 |
| ASSY,LEVER | KYM-M864H-000 |
| SPRING COMP | KYD-MC13T-000 |
| BELT TIMING | KYA-M9152-000 |
| GUIDE LINER ASSY. | KYL-M866D-000 |
| NPM 12*16 FEEDER | KXFW1KSCA00 |
| COGNEX BOARD | KYK-M86PW-000 |
| NOZZLE(BA06) | KYB-M77A6-000 |
| PLATE | N610014970AE |
| BUSH,BEARING | KYB-M3T3S-000 |
| SONY E1000 FILTER | 4-761-920-01 |
| PIN,LOCATE | KYD-MCN3N-000 |
| MACHINE SCREW | KYD-MC14G-000 |
| PIPE FITTING | 630 048 4656 |
| SHROUDED POGO BLOCK | 0938A-0007 |
| WASHER | 90990-37J010 |
| BOLT,HEX-SCT 6300007626 | 91317-04010 |
| ETC MOTOR PKRK93S-2 | 2P 300W |
| GEAR | 4-719-921-02 |
| NPM H16 SENSON | N510054833AA |
| GT38080 FEEDER | GT38080 FEEDER |
| GEAR | KYK-M864C-000 |
| CYLINDER | KYL-M869A-000 |
| PIN,HINGE | KYB-M3T31-000 |
| COUPLING | KYB-M7116-000 |
| NPM 235CS NOZZLE | N610043815AA |
| GEAR | KYD-MC153-00 |
| 8mm FEEDER JIG TAPE | KYH-M8601-00 |
| 0603 CPK JIG CHIP(KOA) | KOA RK73Z1HTTC |
| PIN_LOCATE | KYD-MC21Y-000 |
| RETAINING RING,EXTERNAL | 0125-ERRING-E |
| BELT | N510060977AA |
| SHAFT ASSY. | N510054811AA/N510069637AA |
| PIN_HINGE | KYD-MC41U-000 |
| PCBA FIXTURE | FC150-130-60 |
| SENSOR,PELEC | KYK-M86DE-000 |
| NOZZLE HG33C SET 15 | KYA-M8C07-100 |
| LEVER | KYB-M3T22-000 |
| PIN,HINGE | KYD-MC61N-000/216D0472/6301305042 |
| SENSOR-PELEC | KYK-M861Y-000 |
| POWER SUPPLY | 11632XA |
| CLAMP_GUM | KYB-M3T1R-000/0920H153 |
| P_RCG_SCOPE | KYB-M730B-000 |
| FEEDER | GD38080 |
| WASHER | KYD-MC22H-00 |
| NPM 230CS NOZZLE | N610040788AD |
| MOTOR_DC | KYD-MC410-000 |
| I/O CABLE,WIDE | 0938A-1007 |
| GXH SPECIAL NOZZLE | 13053 |
| DD MOTOR | KYF-M860E-000 |
| F8 SENSOR-PELEC | KYF-M8609-000 |
| SENSOR | KYF-M8681-000 |
| MICRO METER | 350-251-30 |
| CASE-CONN | KYF-M860Y-000 |
| SPRING_COMP | KYB-M91CS-000 |
| ECLIP,0625 | P/N:0062-ECLIP-E |
| GXH Y AXIS GUIDE | GXH Y AXIS GUIDE |
| UNIT,DRIVER | KYK-M860K-000 |
| SONY NOZZLE | CF25200 |
| GS-FB100 VIBRATION FEEDER | KYD-MCHA0-R00 |
| NPM FILTER | N610097899AA |
| PIN_GUIDE | KYB-M122F-000/216F0879 |
| GXH-1 FILTER | KYL-M860S-000 |
| GRIP | KYD-MC109-000 |
| PULLEY,FLAT GXH | KYL-M8681-000 |
| GT-24040B FEEDER | KYD-MCN00-00 |
| YG12 BELT | KHY-M9129-10 |
| BOLT-HEX-SCT | 90990-01J135 M2.5*6 |
| LEVER(SUP) | KYD-MC20D-000 |
| G5S ASSY_SHAFT | KYB-M700V-000 |
| ASSY,GUIDE,LINEAR | KYL-M861U-000 |
| GEAR | KYD-MC23C-000/6301352305 |
| MOTOR_AC-SERVO | KYA-M700N-000 |
| NOZZLE_SHAFT | KYF-M8619-000 |
| TIMING BELT | KYB-M919E-000 |
| SONY NOZZEL | AF10071 |
| ASSY_NOZZLE(BA05) | KYB-M77A5-B00 |
| SPRING_COMP | KYD-MC129-000 |
| GREASE GUN KH-35 | KXF08V7AA00 |
| NPM X479 VALVE | N510054843AA |
| COVER(HIRA-1) | KYD-MC20X-000 |
| COUPLING | KYK-M86AW-000 |
| SENSOR,PELEC | KYL-M8609-000 |
| BOLT,HEX-SCT 630 000 7664 | 91317-04020 |
| NPM 8mm FEEDER | KXFW1S5A00 |
| 937 NOZZLE | 00322591-06 |
| Special Nozzle SPO4R | Special Nozzle SPO4R |
| CYLINDER | KYK-M8629-000/KYB-M919H-000 |
| LABEL FEEDER FOR HITACHI | GL-00100 |
| 340F NOZZLE | 45466934 |
| POWER SUPPLY | 1-474-020-11 |
| SONY NOZZEL AF12082 | AF12082 |
| FUSH-SPECIAL | KYF-M860F-000 |
| ASSY,SPRING,FLAT | KYM-M862H-000/6301592541 |
| SHAFT ASSY. | KYF-M864U-000 |
| TORX FLAT HEAD 3*5 | P/N:M03X05-TFHS |
| ASSY_VACUUM_VALVE | KYB-M7034-000 |
| MOTOR_AC-SERVO | KYK-M86T6-000 |
| HV31 NOZZLE | KYL-M7718-000 |
| ASSY GEAR | KYD-MC20K-000/0926220R |
| NPM 226CS NOZZLE | N610040783AB |
| BOLT_HEX-SCT | 90990-01J142 M3*12 |
| COVER ASSY | X-4700-067-4 |
| GUIDE,LINEAR | KYK-M86KY-000 |
| BOTTON | ZB6-EB3B |
| NOZZLE(FF01) | KYB-M77F1-000 |
| SI -F130 REC PLUNGER KIT | A-1067-852-A |
| GREASE | N990PANA-023 |
| BUSH,BEARING | KYB-M3T3R-000 |
| BLOCK | KYF-M867D-000 |
| 1220 NOZZLE | 51305323 |
| NPM 185 NOZZLE | N610070338AB |
| 222L0935 Sigma-G5 Y AXIS GUIDE_LINEAR | KYF-M867L-000 |
| NPM 256CS NOZZLE | NPM 256CS NOZZLE |
| Encoder Read Head For Universal | 49566101 |
| NOZZLE (U TYPE) | KYB-M3828-000 |
| GEAR | KYD-MC23C-00 |
| BLOCK | KYL-M86KC-000/211G5472 |
| BALL | 4-719-920-01 |
| NOZZLE_HG33C | KYA-M7703-000 |
| SEAL | KYB-M702B-000 |
| 234F NOZZLE | 45466931 |
| PULLEY_TIMING | KYB-M91AL-000 |
| BOLT,HEX.SOCKET HEAD | 91312-03004 |
| MOTOR_AC-SERVO | KYF-M860D-000 |
| ASSY GRIP | KYD-MC21H-000 |
| COVER | KYK-M86RD-000 |
| 933 NOZZLE | 00346523-03 |
| NOZZLE_HV14C | KYA-M7714-000 |
| PIN_HINGE | KYD-MC42S-000 |
| WASHER | 92902-03100 |
| 16mm FEEDER JIG TAPE | KYH-M8603-00 |
| GERA(HASUBA) | KYD-MC131-000 |
| SPRING_COMP | KYD-MCN41-000 |
| NOZZLE HG52C set 15 | KYA-M8C07-200 |
| LEVER | KYK-M861V-000 |
| NOZZLE_HV19C | KYA-M7719-000 |
| ROCK | 2-149-675-01 |
| GEAR | KYD-MC21U-000 |
| BOLT,HEX-SCT 630 000 7503 | 91317-03006 |
| PIN_LOCATE | KYD-MC137-000 |
| DEK POWER SUPPLY | V6G00KZ/185312 |
| NPM 240C NOZZLE | N610062681AD |
| GUIDE,LINEAR | KYK-M86LE-001 |
| LEVER | KYB-M3T33-000 |
| COVER | KYM-M860X-000 |
| 938 NOZZLE | 00322592-05 |
| MOTOR,AC-SERVO | KYK-M860P-000 |
| MOTOR,AC-SERVO | KYF-M860P-000 |
| NPM 230C NOZZLE | N610040784AD |
| ASSY_CABLE | KYL-M86NC-000 |
| NOZZLE_HV13C | KYA-M7713-000 |
| COVER (12/16mm) | KYD-MC20Y-000 |
| NPM 8头 NOZZLE HOLDER | N610067607AE |
| Fuji Packing | PH00991 |
| PIN,HINGE | KYD-MC41S-000 |
| ROLLER(B) | KYK-M86EM-000 |
| GUIDE,LINEAR | LWHD12X3 |
| NOZZLE(HB03C) | KYB-M7720-100 |
| COVER(LB) | KYM-M8657-000 |
| NOZZLE(FA06) | KYB-M77F6-000 |
| ASSY_LEVER(R) | KYD-MC11N-000 |
| GXH X AXIS GUIDE | GXH X AXIS GUIDE |
| DRIVER | N510002593AA |
| BELT_TIMING | KYA-M914W-000 |
| PCB-MOUNT G5 CUP2 | KYF-M868C-000 |
| BELT | 6*3080*0.9 mm |
| MOTOR | KYA-M700R-000 |
| ASSY_NOZZLE(BC02) | KYB-M77C2-B00 |
| VALVE | 4-187-212-01 |
| VALVE | 2-673-684-01 |
| YG12F BELT | KHY-M9129-00 |
| NPM H16 SHAFT | N510064335AA |
| HOLDER | KYB-M702F-000/0916DK2D |
| ASSY_TENSION | KYD-MC21N-000 |
| GUIDE | KYD-MC11T-000 |
| V8V11 (MOTOR_HL) | KYA-M700S-000 |
| ASSY_NOZZLE(VA05) | KYK-M770J-A00 |
| GUIDE,LINEAR | KYF-M867P-000 |
| SPRING | P/N:0730C-0252 |
| TOOL | N510031628AA |
| PIN-GAUGE | KXF00YHTA00 |
| NPM H8 SENSON | N510048691AA |
| ASSY,SPROCKET | KYM-M862A-000 |
| ASSY_GEAR | KYD-MC11A-000 |
| BOLT-HEX-SCT | 90990-01J115 |
| SONY1000 FILTER | 4-761-920-01 |
| CORD,BCR | KYF-M86NC-000 |
| SEAL | KYT-M862W-000 |
| NPM 235C NOZZLE | N610043814AD |
| NOZZLE(FA04) | KYB-M77F4-000 |
| BELT | N510021326AA |
| NOZZLE_HG52C | KYA-M7705-000 |
| ACCESSORY,SV | KYL-M861C-000 |
| MOTOR_DC | KYD-MCN2G-000 |
| PIN-GAUGE | KXF00YHUA00 |
| NOZZLE(WC01) | KYB-M77W1-100 |
| ASSY,GEAR | KYM-M862C-000 |
| POGO BLOCK | 0738A-0029 |
| DEK SQUEEGE | DEK-03T 长25CM |
| MOTOR,AC-SERVO | KYL-M867G-000 |
| GREASE FOR PANASONIC | N510048188AA |
| FFU | MX--575-A |
| KIC ON BOARD | 6-10 CHANEL |
| ASSY_GEAR | KYD-MC40F-000 |
| Fuji Filter | AA1FZ04 |
| PIN,HINGE | KYB-M3T2Y-000 |
| GEAR | KYD-MC424-000/223E0481 |
| SENSOR,PELEC | KYL-M86HL-000 |
| CPK JG0250 | CPK JG0250 |
| BELT | N510065133AA |
| SONY MOTHER BOARD | 1-797-651-12 |
| GUIDE,LINEAR | KYK-M860S-000 |
| GUIDE,LINEAR | KYK-M86LE-001 |
| SDD Hard Disk | N610059692AA |
| RT BELT | 3-212-264-01 |
| FAN | 1204KL-04W-B59 |
| ASSY_HOOK | KYD-MC10T-000/016J0024 |
| ASSY_NOZZLE(BT06) | KYB-M77BA-A00 |
| Y AXIS GUIDE | SSR5XW2UUC1+970LYH |
| ASSY_SUPPRESSOR | KYD-MC10R-000 |
| UNIT-DRIVER | KYK-M861A-000 |
| AIR_LINE_EQPT | KYB-M704D-000 |
| ASSY_SPRING_FL | KYD-MC20U-000 |
| NOZZLE | HG53G |
| COVER(RB) | KYM-M8612-000 |
| ASSY,HOOK | KYD-MC40A-000 |
| DSP-2008K SQUEEGE | L:20CM |
| BELT | 44548605 |
| HNS,EXT-POWER-FDR | KYB-M370R-000 |
| B-234 NOZZLE | 47561103-B-234 |
| FILTER | K46-M8527-COX |
| ASSY_GEAR | KYD-MC412-000 |
| VALVE | SY3120-MZD-C6-F2 |
| HELICAL SPRING | N210068065AA |
| ASSY GEAR | KYD-MC211-000 |
| COVER(MAK1-2) | KYD-MC11X-000 |
| NOZZLE(VC74) | KYK-M7725-000 |
| ASSY_BLOCK_TOP | KYD-M701U-000 |
| CAM_FOLLOWER | KYA-M912N-000 |
| P/N:JG000912 8mm | P/N:JG000912 8mm |
| COVER(RB) | KYD-MC10L-000 |
| GEAR(Feeder GEAR) | KYD-MC130-000/1016B209 |
| FEEDER CABLE | KYL-M869D-000 |
| HOLDER | KYB-M701R-000 |
| NOZZLE(Y TYPE) | KYB-M382A-000 |
| HNS,CONV-MOT-R | KYB-M9143-000 |
| CASE-CONN | KYK-M860Y-000 |
| 935 NOZZLE | 00346524-03 |
| AIR_LINE_EQPT | KYB-M704D-000 |
| TAIL PIVOT | P/N:0740C-0109 |
| 904 NOZZLE | Y074-V904-0015 |
| LEVER | KYB-M3T21-000 |
| BOLT_HEX-SCT | 90990-06J009 M4*20 |
| SONY TRAY SHUTTER CYLINDER | 1-478-936-11/MXU16-20-M9N |
| LINE-SENSOR | KYF-M8607-000 |
| BLOCK L3 | KYB-M960C-000 |
| SLIP RING | KYB-M7027-000 |
| LEVER | KYB-M3T01-000 |
| ETC MOTOR | PK2K93S-2D |
| CAM FOLLOWER | KYB-M704A-000 |
| ASSY_VALVE_F | KYB-M3J0X-000 |
| LIGHTING_UNIT | KYB-M700T-000 |
| HNS,LIGHTING | KYF-M861W-000 |
| GEAR | KYU-M868B-000 |
| BM02 NOZZLE | BM02 |
| PIN,HINGE | KYL-M860R-000 |
| LEVER | KYB-M3T0M-000 |
| PIN_LOCATE | KYD-MC132-000 |
| PLATE | KYA-M3804-000 |
| BUCK_UP_PIN | KYA-M3802-000 |
| BOLT,HEX.SOCKET HEAD | KYK-M86NS-000 |
| SPRING COMP | KYD-MC422-000 |
| BOLT,HEX-SCT 630 000 7527 | 91317-03010 |
| ASSY_SHAFT | KYF-M8651-000 |
| ASSY_LEVER | KYD-MC212-000 |
| BELT | 00334936S01 |
| BRACKET | KYL-M86KD-000/211FC709 |
| HNS,CORD | KYL-M8621-000 |
| SEAL | KYB-M704E-000 |
| WASHER | 92902-03200 |
| ASSY_GEAR (8mm) | KYD-MC12L-000/1016120W |
| COUPLING | KYB-M702C-000 |
| DISK | KYB-M3T1A-000 |
| NOZZLE(HB04C) | KYB-M7721-100 |
| LEVER | KYK-M86LV-000 |
| VALVE | SY3240-5LZD |
| BLOCK | KYA-M7027-000 |
| UNIT,I/O | KYL-M86LV-000 |
| TAIL PIVOT BEARING | P/N:0740C-0110 |
| UNIT_DRIVER | KYK-M860F-000 |
| FUSE | KYL-M86KH-000 |
| NOZZLE(FA05) | KYB-M77F5-000 |
| BELT | 6*3080*0.9 mm |
| ASSY_LEVER(L) | KYD-MC11M-000 |
| SPRING_COMP | KYD-MC3T-000 |
| GEAR | KYD-MC20K-00 |
| ARM STEEL | N210007284AB |
| ETC INDUCTION MOTOR | PKRK93S-2A |
| NOZZLE FILTER(10K) | KYF-M8645-000 |
| MOTOR,AC-SERVO | KYL-M8625-000 |
| UNIT-IO(DOM4G) | KYF-M8602-000 |
| ASSY,LEVER | KYM-M8648-000 |
| PCB-MOUNT | KYK-M861W-000 |
| 32mm FEEDER JIG TAPE | KYH-M8604-000 |
| BELT | 00200341-01 |
About Us
Merex Techonologies Co.,Ltd
In 2016, Shenzhen merex Technology Co., Ltd. was established to build a more timely and effective
communication platform, and realize the company's service tenet of serving leading customers.
The engineers of the company are professional technicians who have been certified by the original
factory for more than 10 years. They always adhere to the value of putting the interests of customers
first, and provide customers with high-quality equipment accessories, consumables, fixtures and
technical support services.
In order to effectively reduce the cost of customers, the company set up a machining plant, and
changed most of the feeder parts to self-produced parts, so as to ensure sufficient inventory and
reduce the cost of customers at the same time
SMT technical service - 20 years
SMT parts sales - 18 years
Export to foreign customers - 6 years
Fixture development and manufacturing - 5 years
It is precisely because meire technology has the following advantages over the same industry that
more and more customers choose meire as their preferred supplier.
Professional pre-sales advice support
Excellent after-sales technical service
One stop solution for SMT accessories
Flexible payment and return policy
Stock in the factory with sufficient stock and fast delivery
Merex is a professional company engaged in SMT one-stop technical services, mainly engaged
in Hitachi, Yamaha, Panasonic and other SMT equipment and accessories, with a professional
after-sales service team, committed to rapid, efficient and low-cost solutions to all kinds of SMT
problems encountered by customers in production. In addition, the company also developed
automatic feeder calibrator, Cpk test fixture and other related products, and obtained national
patents. Welcome agent!
All engineering personnel of Merex are trained by the original factory, with advanced testing
instruments and a full set of technical documents. The average SMT related work experience
is more than 15 years, so our response speed and technology are better than others
Merex pursues the quality and details of the mechanism, and strives to deliver every product
to customers as a top-quality product. No matter domestic or overseas customers, we have
unified standards. If there are problems occasionally, we promise to deliver goods first to
minimize the loss caused by downtime.
