Active Member
|
[China]
Address: Unit 919 of Yagang BLDG, Fu'an Avenue，Pinghu，Longgang，Shenzhen，China
Contact name:Ma
shenzhen merex technology co.,ltd |
|
|
KW1-M112A-00X RACKING LEVER ASSY SMT Feeder Parts for YAMAHA
| Part No | KW1-M112A-00X |
| Part Name | RACKING LEVER ASSY |
| Condition | Compatible new |
| Material | iron/steel |
| Usage | Yamaha machine |
| Type | Smt Feeder part |
Hot sale stock list:
| V8V11 (MOTOR_HL) | KYA-M700S-000 |
| P/N:JG000912 8mm | P/N:JG000912 8mm |
| HOLDER | KYB-M701R-000 |
| ASSY,GUIDE,LINEAR | KYL-M861U-000 |
| NOZZLE(HB04C) | KYB-M7721-100 |
| GT38080 FEEDER | GT38080 FEEDER |
| ASSY_VACUUM_VALVE | KYB-M7034-000 |
| CASE-CONN | KYK-M860Y-000 |
| PIN,LOCATE | KYD-MCN3N-000 |
| NPM 8mm FEEDER | KXFW1S5A00 |
| ASSY_VALVE_F | KYB-M3J0X-000 |
| NOZZLE(BA06) | KYB-M77A6-000 |
| WASHER | 92902-03200 |
| CLAMP_GUM | KYB-M3T1R-000/0920H153 |
| COUPLING | KYB-M702C-000 |
| NPM 235C NOZZLE | N610043814AD |
| BLOCK | KYA-M7027-000 |
| BOLT,HEX.SOCKET HEAD | KYK-M86NS-000 |
| MOTOR_DC | KYD-MC410-000 |
| NOZZLE_HV14C | KYA-M7714-000 |
| NOZZLE | HG53G |
| FILTER | K46-M8527-COX |
| HV31 NOZZLE | KYL-M7718-000 |
| PIN_LOCATE | KYD-MC21Y-000 |
| BLOCK | KYL-M86KC-000/211G5472 |
| ETC MOTOR PKRK93S-2 | 2P 300W |
| GUIDE,LINEAR | KYK-M86KY-000 |
| P_RCG_SCOPE | KYB-M730B-000 |
| SHROUDED POGO BLOCK | 0938A-0007 |
| ASSY_NOZZLE(BT06) | KYB-M77BA-A00 |
| BOLT,HEX-SCT 630 000 7527 | 91317-03010 |
| SONY TRAY SHUTTER CYLINDER | 1-478-936-11/MXU16-20-M9N |
| MACHINE SCREW | KYD-MC14G-000 |
| WASHER | KYD-MC22H-00 |
| BOLT-HEX-SCT | 90990-01J135 M2.5*6 |
| SONY NOZZLE | CF25200 |
| SPRING COMP | KYD-MC422-000 |
| 32mm FEEDER JIG TAPE | KYH-M8604-000 |
| PIN_LOCATE | KYD-MC137-000 |
| NPM X479 VALVE | N510054843AA |
| SPRING | P/N:0730C-0252 |
| HNS,EXT-POWER-FDR | KYB-M370R-000 |
| PCBA FIXTURE | FC150-130-60 |
| BOLT-HEX-SCT | 90990-01J115 |
| PIN_HINGE | KYD-MC41U-000 |
| VALVE | 2-673-684-01 |
| SONY NOZZEL AF12082 | AF12082 |
| BOLT,HEX-SCT 630 000 7664 | 91317-04020 |
| GT-24040B FEEDER | KYD-MCN00-00 |
| NOZZLE HG52C set 15 | KYA-M8C07-200 |
| NPM 230C NOZZLE | N610040784AD |
| POWER SUPPLY | 11632XA |
| SONY1000 FILTER | 4-761-920-01 |
| DEK POWER SUPPLY | V6G00KZ/185312 |
| RETAINING RING,EXTERNAL | 0125-ERRING-E |
| PIN-GAUGE | KXF00YHUA00 |
| PIPE FITTING | 630 048 4656 |
| BLOCK | KYF-M867D-000 |
| UNIT-IO(DOM4G) | KYF-M8602-000 |
| GXH-1 FILTER | KYL-M860S-000 |
| SONY NOZZEL | AF10071 |
| ASSY_LEVER | KYD-MC212-000 |
| SENSOR,PELEC | KYL-M8609-000 |
| AIR_LINE_EQPT | KYB-M704D-000 |
| SPRING_COMP | KYD-MCN41-000 |
| GXH Y AXIS GUIDE | GXH Y AXIS GUIDE |
| LEVER | KYB-M3T22-000 |
| POWER SUPPLY | 1-474-020-11 |
| MOTOR,AC-SERVO | KYL-M867G-000 |
| FFU | MX--575-A |
| LEVER | KYB-M3T21-000 |
| SENSOR | KYF-M8681-000 |
| LIGHTING_UNIT | KYB-M700T-000 |
| GXH X AXIS GUIDE | GXH X AXIS GUIDE |
| COGNEX BOARD | KYK-M86PW-000 |
| GUIDE,LINEAR | KYK-M860S-000 |
| B-234 NOZZLE | 47561103-B-234 |
| SI -F130 REC PLUNGER KIT | A-1067-852-A |
| ARM STEEL | N210007284AB |
| LEVER | KYB-M3T0M-000 |
| ASSY GRIP | KYD-MC21H-000 |
| BELT | 44548605 |
| ASSY_NOZZLE(BA05) | KYB-M77A5-B00 |
| PLATE | KYA-M3804-000 |
| LEVER | KYB-M3T33-000 |
| ASSY_SPRING_FL | KYD-MC20U-000 |
| 1220 NOZZLE | 51305323 |
| CYLINDER | KYK-M8629-000/KYB-M919H-000 |
| COVER | KYK-M86RD-000 |
| VALVE | 4-187-212-01 |
| ASSY_GEAR (8mm) | KYD-MC12L-000/1016120W |
| ASSY,HOOK | KYD-MC40A-000 |
| POGO BLOCK | 0738A-0029 |
| COVER | KYM-M860X-000 |
| ASSY_NOZZLE(BC02) | KYB-M77C2-B00 |
| MOTOR_AC-SERVO | KYF-M860D-000 |
| MOTOR,AC-SERVO | KYL-M8625-000 |
| BELT | N510021326AA |
| ASSY,GEAR | KYM-M862C-000 |
| ECLIP,0625 | P/N:0062-ECLIP-E |
| ASSY GEAR | KYD-MC20K-000/0926220R |
| BLOCK L3 | KYB-M960C-000 |
| Y AXIS GUIDE | SSR5XW2UUC1+970LYH |
| NOZZLE_HG52C | KYA-M7705-000 |
| ETC INDUCTION MOTOR | PKRK93S-2A |
| ASSY_NOZZLE(VA06) | KYK-M7720-A00 |
| LINE-SENSOR | KYF-M8607-000 |
| HNS,CONV-MOT-R | KYB-M9143-000 |
| COVER(LB) | KYM-M8657-000 |
| HNS,LIGHTING | KYF-M861W-000 |
| SEAL | KYT-M862W-000 |
| NPM 235CS NOZZLE | N610043815AA |
| SPRING_COMP | KYD-MC3T-000 |
| I/O CABLE,WIDE | 0938A-1007 |
| MOTOR_AC-SERVO | KYK-M86T6-000 |
| COVER(MAK1-2) | KYD-MC11X-000 |
| PLATE | N610014970AE |
| PIN,HINGE | KYD-MC41S-000 |
| PIN_GUIDE | KYB-M122F-000/216F0879 |
| Fuji Packing | PH00991 |
| NOZZLE(FA05) | KYB-M77F5-000 |
| PIN_HINGE | KYD-MC42S-000 |
| UNIT,DRIVER | KYK-M860K-000 |
| BOLT_HEX-SCT | 90990-01J142 M3*12 |
| COUPLING | KYB-M7116-000 |
| VALVE | SY3120-MZD-C6-F2 |
| COVER(HIRA-1) | KYD-MC20X-000 |
| GERA(HASUBA) | KYD-MC131-000 |
| GUIDE,LINEAR | KYF-M867P-000 |
| UNIT-DRIVER | KYK-M861A-000 |
| MOTOR_AC-SERVO | KYA-M700N-000 |
| BOTTON | ZB6-EB3B |
| ASSY_GEAR | KYD-MC11A-000 |
| CASE-CONN | KYF-M860Y-000 |
| NOZZLE_HV19C | KYA-M7719-000 |
| GREASE GUN KH-35 | KXF08V7AA00 |
| NPM H16 SENSON | N510054833AA |
| GEAR | KYD-MC21U-000 |
| GEAR | KYK-M864C-000 |
| TORX FLAT HEAD 3*5 | P/N:M03X05-TFHS |
| VALVE | SY3240-5LZD |
| GEAR | KYD-MC153-00 |
| GEAR | 4-719-921-02 |
| NOZZLE_HG82C | KYA-M7708-000 |
| ASSY_PLATE(MAGNET) | KYD-MC115-000 |
| NOZZLE_HG33C | KYA-M7703-000 |
| GREASE | N990PANA-023 |
| DRIVER | N510002593AA |
| ASSY_HOOK | KYD-MC10T-000/016J0024 |
| ASSY_TENSION | KYD-MC21N-000 |
| ASSY,SPRING,FLAT | KYM-M862H-000/6301592541 |
| Encoder Read Head For Universal | 49566101 |
| LEVER(SUP) | KYD-MC20D-000 |
| PIN-GAUGE | KXF00YHTA00 |
| LEVER | KYK-M861V-000 |
| SPRING_COMP | KYB-M91CS-000 |
| 234F NOZZLE | 45466931 |
| BRACKET | KYL-M86KD-000/211FC709 |
| NPM 8头 NOZZLE HOLDER | N610067607AE |
| NPM 256CS NOZZLE | NPM 256CS NOZZLE |
| BOLT_HEX-SCT | 90990-06J009 M4*20 |
| COVER(RB) | KYD-MC10L-000 |
| ASSY,SPROCKET | KYM-M862A-000 |
| DISK | KYB-M3T1A-000 |
| NOZZLE(FA04) | KYB-M77F4-000 |
| TAIL PIVOT | P/N:0740C-0109 |
| SONY E1000 FILTER | 4-761-920-01 |
| BOLT,HEX-SCT 6300007626 | 91317-04010 |
| NOZZLE(Y TYPE) | KYB-M382A-000 |
| CAM FOLLOWER | KYB-M704A-000 |
| ASSY_NOZZLE(VA05) | KYK-M770J-A00 |
| UNIT,I/O | KYL-M86LV-000 |
| DD MOTOR | KYF-M860E-000 |
| Special Nozzle SPO4R | Special Nozzle SPO4R |
| AIR_LINE_EQPT | KYB-M704D-000 |
| 937 NOZZLE | 00322591-06 |
| HELICAL SPRING | N210068065AA |
| FEEDER CABLE | KYL-M869D-000 |
| COVER ASSY | X-4700-067-4 |
| NPM H16 SHAFT | N510064335AA |
| TOOL | N510031628AA |
| 16mm FEEDER JIG TAPE | KYH-M8603-00 |
| LABEL FEEDER FOR HITACHI | GL-00100 |
| 8mm FEEDER JIG TAPE | KYH-M8601-00 |
| ASSY,LEVER | KYM-M8648-000 |
| SENSOR-PELEC | KYK-M861Y-000 |
| F8 SENSOR-PELEC | KYF-M8609-000 |
| GEAR | KYD-MC23C-00 |
| GS-FB100 VIBRATION FEEDER | KYD-MCHA0-R00 |
| GXH SPECIAL NOZZLE | 13053 |
| PULLEY_TIMING | KYB-M91AL-000 |
| NOZZLE(HB03C) | KYB-M7720-100 |
| COVER(RB) | KYM-M8612-000 |
| 938 NOZZLE | 00322592-05 |
| ETC MOTOR | PK2K93S-2D |
| PCB-MOUNT | KYK-M861W-000 |
| WASHER | 90990-37J010 |
| PIN_LOCATE | KYD-MC132-000 |
| ROCK | 2-149-675-01 |
| GRIP | KYD-MC109-000 |
| ASSY,LEVER | KYM-M864H-000 |
| BELT | 6*3080*0.9 mm |
| BELT_TIMING | KYA-M914W-000 |
| NOZZLE_HV13C | KYA-M7713-000 |
| GUIDE LINER ASSY. | KYL-M866D-000 |
| KIC ON BOARD | 6-10 CHANEL |
| CORD,BCR | KYF-M86NC-000 |
| UNIT_DRIVER | KYK-M860F-000 |
| SDD Hard Disk | N610059692AA |
| SHAFT ASSY. | KYF-M864U-000 |
| HNS,CORD | KYL-M8621-000 |
| BOLT,HEX-SCT 630 000 7503 | 91317-03006 |
| BOLT,HEX.SOCKET HEAD | 91312-03004 |
| NPM 240C NOZZLE | N610062681AD |
| NPM FILTER | N610097899AA |
| GREASE FOR PANASONIC | N510048188AA |
| DEK SQUEEGE | DEK-03T 长25CM |
| PIN,HINGE | KYB-M3T2Y-000 |
| NOZZLE(VC74) | KYK-M7725-000 |
| BELT | 6*3080*0.9 mm |
| NOZZLE(WC01) | KYB-M77W1-100 |
| GUIDE,LINEAR | KYK-M86LE-001 |
| ASSY_CABLE | KYL-M86NC-000 |
| ASSY_SHAFT | KYF-M8651-000 |
| 904 NOZZLE | Y074-V904-0015 |
| COVER (12/16mm) | KYD-MC20Y-000 |
| MOTOR,AC-SERVO | KYF-M860P-000 |
| CAM_FOLLOWER | KYA-M912N-000 |
| FAN | 1204KL-04W-B59 |
| SENSOR,PELEC | KYK-M86DE-000 |
| GEAR | KYU-M868B-000 |
| BUCK_UP_PIN | KYA-M3802-000 |
| CPK JG0250 | CPK JG0250 |
| YG12F BELT | KHY-M9129-00 |
| G5S ASSY_SHAFT | KYB-M700V-000 |
| YG12 BELT | KHY-M9129-10 |
| TAIL PIVOT BEARING | P/N:0740C-0110 |
| NOZZLE FILTER(10K) | KYF-M8645-000 |
| LEVER | KYK-M86LV-000 |
| GUIDE,LINEAR | KYK-M86LE-001 |
| SLIP RING | KYB-M7027-000 |
| NPM 226CS NOZZLE | N610040783AB |
| BELT | N510060977AA |
| SHAFT ASSY. | N510054811AA/N510069637AA |
| SPRING_COMP | KYD-MC129-000 |
| NPM 185 NOZZLE | N610070338AB |
| MICRO METER | 350-251-30 |
| MOTOR | KYA-M700R-000 |
| FUSE | KYL-M86KH-000 |
| 222L0935 Sigma-G5 Y AXIS GUIDE_LINEAR | KYF-M867L-000 |
| NOZZLE_SHAFT | KYF-M8619-000 |
| FUSH-SPECIAL | KYF-M860F-000 |
| PIN,HINGE | KYD-MC61N-000/216D0472/6301305042 |
| MOTOR_DC | KYD-MCN2G-000 |
| SENSOR,PELEC | KYL-M86HL-000 |
| ASSY_GEAR | KYD-MC412-000 |
| GEAR | KYD-MC20K-00 |
| PULLEY,FLAT GXH | KYL-M8681-000 |
| NOZZLE (U TYPE) | KYB-M3828-000 |
| CYLINDER | KYL-M869A-000 |
| ASSY_SUPPRESSOR | KYD-MC10R-000 |
| Fuji Filter | AA1FZ04 |
| PIN,HINGE | KYB-M3T31-000 |
| ROLLER(B) | KYK-M86EM-000 |
| MOTOR,AC-SERVO | KYK-M860P-000 |
| GUIDE | KYD-MC11T-000 |
| GEAR | KYD-MC424-000/223E0481 |
| NOZZLE(FA06) | KYB-M77F6-000 |
| BUSH,BEARING | KYB-M3T3R-000 |
| ASSY_BLOCK_TOP | KYD-M701U-000 |
| TIMING BELT | KYB-M919E-000 |
| SEAL | KYB-M702B-000 |
| BM02 NOZZLE | BM02 |
| ASSY_GEAR | KYD-MC40F-000 |
| SEAL | KYB-M704E-000 |
| BALL | 4-719-920-01 |
| GEAR(Feeder GEAR) | KYD-MC130-000/1016B209 |
| NOZZLE HG33C SET 15 | KYA-M8C07-100 |
| PCB-MOUNT G5 CUP2 | KYF-M868C-000 |
| ASSY GEAR | KYD-MC211-000 |
| 933 NOZZLE | 00346523-03 |
| GEAR | KYD-MC23C-000/6301352305 |
| SPRING COMP | KYD-MC13T-000 |
| BELT | 00334936S01 |
| WASHER | 92902-03100 |
| RT BELT | 3-212-264-01 |
| PIN,HINGE | KYL-M860R-000 |
| NPM 230CS NOZZLE | N610040788AD |
| NPM 12*16 FEEDER | KXFW1KSCA00 |
| GUIDE,LINEAR | LWHD12X3 |
| BUSH,BEARING | KYB-M3T3S-000 |
| 0603 CPK JIG CHIP(KOA) | KOA RK73Z1HTTC |
| 340F NOZZLE | 45466934 |
| SONY MOTHER BOARD | 1-797-651-12 |
| HOLDER | KYB-M702F-000/0916DK2D |
| 360F NOZZLE | 45466917 |
| DSP-2008K SQUEEGE | L:20CM |
| FEEDER | GD38080 |
| NOZZLE(FF01) | KYB-M77F1-000 |
| BELT | N510065133AA |
| LEVER | KYB-M3T01-000 |
| 935 NOZZLE | 00346524-03 |
| ASSY_LEVER(R) | KYD-MC11N-000 |
| BELT TIMING | KYA-M9152-000 |
| ACCESSORY,SV | KYL-M861C-000 |
| ASSY_LEVER(L) | KYD-MC11M-000 |
| COUPLING | KYK-M86AW-000 |
| SLIP RING | KYB-M7027-000 |
| NPM H8 SENSON | N510048691AA |
| BELT | 00200341-01 |
About Us
Merex Techonologies Co.,Ltd
In 2016, Shenzhen merex Technology Co., Ltd. was established to build a more timely and effective
communication platform, and realize the company's service tenet of serving leading customers.
The engineers of the company are professional technicians who have been certified by the original
factory for more than 10 years. They always adhere to the value of putting the interests of customers
first, and provide customers with high-quality equipment accessories, consumables, fixtures and
technical support services.
In order to effectively reduce the cost of customers, the company set up a machining plant, and
changed most of the feeder parts to self-produced parts, so as to ensure sufficient inventory and
reduce the cost of customers at the same time
SMT technical service - 20 years
SMT parts sales - 18 years
Export to foreign customers - 6 years
Fixture development and manufacturing - 5 years
It is precisely because meire technology has the following advantages over the same industry that
more and more customers choose meire as their preferred supplier.
Professional pre-sales advice support
Excellent after-sales technical service
One stop solution for SMT accessories
Flexible payment and return policy
Stock in the factory with sufficient stock and fast delivery
Merex is a professional company engaged in SMT one-stop technical services, mainly engaged
in Hitachi, Yamaha, Panasonic and other SMT equipment and accessories, with a professional
after-sales service team, committed to rapid, efficient and low-cost solutions to all kinds of SMT
problems encountered by customers in production. In addition, the company also developed
automatic feeder calibrator, Cpk test fixture and other related products, and obtained national
patents. Welcome agent!
All engineering personnel of Merex are trained by the original factory, with advanced testing
instruments and a full set of technical documents. The average SMT related work experience
is more than 15 years, so our response speed and technology are better than others
Merex pursues the quality and details of the mechanism, and strives to deliver every product
to customers as a top-quality product. No matter domestic or overseas customers, we have
unified standards. If there are problems occasionally, we promise to deliver goods first to
minimize the loss caused by downtime.
