Active Member
|
[China]
Address: Unit 919 of Yagang BLDG, Fu'an Avenue，Pinghu，Longgang，Shenzhen，China
Contact name:Ma
shenzhen merex technology co.,ltd |
|
|
HG14C / KYB-M771K-A00 ASSY NOZZLE Smt Pick and Place Nozzles for Hitachi
| Part No | HG14C / KYB-M771K-A00 |
| Part Name | Nozzle |
| Condition | Compatible new / Original new |
| Material | Steel/Ceramic |
| Usage | Hitachi machine |
| Type | Smt Pick and Place Nozzles part |
Hot sale stock list:
| SPRING_COMP | KYD-MC129-000 |
| F8 SENSOR-PELEC | KYF-M8609-000 |
| PIN_LOCATE | KYD-MC137-000 |
| TOOL | N510031628AA |
| NPM FILTER | N610097899AA |
| WASHER | 92902-03200 |
| SI -F130 REC PLUNGER KIT | A-1067-852-A |
| ASSY_LEVER(R) | KYD-MC11N-000 |
| ASSY,LEVER | KYM-M864H-000 |
| NOZZLE(Y TYPE) | KYB-M382A-000 |
| NOZZLE(FA05) | KYB-M77F5-000 |
| ASSY_GEAR | KYD-MC40F-000 |
| ASSY_VACUUM_VALVE | KYB-M7034-000 |
| SLIP RING | KYB-M7027-000 |
| COVER(MAK1-2) | KYD-MC11X-000 |
| PIN,HINGE | KYD-MC41S-000 |
| PIN,HINGE | KYB-M3T2Y-000 |
| BUSH,BEARING | KYB-M3T3R-000 |
| ASSY,LEVER | KYM-M8648-000 |
| MOTOR_AC-SERVO | KYA-M700N-000 |
| BALL | 4-719-920-01 |
| GXH-1 FILTER | KYL-M860S-000 |
| P_RCG_SCOPE | KYB-M730B-000 |
| BELT TIMING | KYA-M9152-000 |
| NOZZLE_HG82C | KYA-M7708-000 |
| WASHER | 90990-37J010 |
| MOTOR,AC-SERVO | KYL-M8625-000 |
| LEVER(SUP) | KYD-MC20D-000 |
| CPK JG0250 | CPK JG0250 |
| ETC MOTOR PKRK93S-2 | 2P 300W |
| PIN-GAUGE | KXF00YHUA00 |
| PIN,LOCATE | KYD-MCN3N-000 |
| VALVE | SY3120-MZD-C6-F2 |
| GUIDE,LINEAR | KYF-M867P-000 |
| BOLT,HEX-SCT 630 000 7527 | 91317-03010 |
| SONY NOZZEL | AF10071 |
| NOZZLE FILTER(10K) | KYF-M8645-000 |
| CAM_FOLLOWER | KYA-M912N-000 |
| LEVER | KYB-M3T33-000 |
| B-234 NOZZLE | 47561103-B-234 |
| MOTOR_DC | KYD-MCN2G-000 |
| NPM 8头 NOZZLE HOLDER | N610067607AE |
| 933 NOZZLE | 00346523-03 |
| FILTER | K46-M8527-COX |
| FFU | MX--575-A |
| LEVER | KYB-M3T21-000 |
| G5S ASSY_SHAFT | KYB-M700V-000 |
| 340F NOZZLE | 45466934 |
| VALVE | 2-673-684-01 |
| SPRING COMP | KYD-MC13T-000 |
| BELT | 6*3080*0.9 mm |
| GEAR | KYD-MC23C-00 |
| Special Nozzle SPO4R | Special Nozzle SPO4R |
| NOZZLE(FA06) | KYB-M77F6-000 |
| YG12F BELT | KHY-M9129-00 |
| ASSY_GEAR | KYD-MC412-000 |
| GXH Y AXIS GUIDE | GXH Y AXIS GUIDE |
| GEAR | KYD-MC424-000/223E0481 |
| HNS,CONV-MOT-R | KYB-M9143-000 |
| LABEL FEEDER FOR HITACHI | GL-00100 |
| BOLT,HEX.SOCKET HEAD | 91312-03004 |
| 937 NOZZLE | 00322591-06 |
| PIN_HINGE | KYD-MC41U-000 |
| DSP-2008K SQUEEGE | L:20CM |
| HV31 NOZZLE | KYL-M7718-000 |
| LEVER | KYK-M861V-000 |
| CORD,BCR | KYF-M86NC-000 |
| SDD Hard Disk | N610059692AA |
| BELT | 00334936S01 |
| BELT | N510060977AA |
| VALVE | SY3240-5LZD |
| HNS,EXT-POWER-FDR | KYB-M370R-000 |
| CYLINDER | KYK-M8629-000/KYB-M919H-000 |
| COVER(RB) | KYM-M8612-000 |
| PCBA FIXTURE | FC150-130-60 |
| ASSY_SHAFT | KYF-M8651-000 |
| ASSY GRIP | KYD-MC21H-000 |
| DD MOTOR | KYF-M860E-000 |
| GXH X AXIS GUIDE | GXH X AXIS GUIDE |
| ASSY_GEAR | KYD-MC11A-000 |
| GT-24040B FEEDER | KYD-MCN00-00 |
| SENSOR-PELEC | KYK-M861Y-000 |
| POWER SUPPLY | 1-474-020-11 |
| Fuji Packing | PH00991 |
| ASSY_VALVE_F | KYB-M3J0X-000 |
| YG12 BELT | KHY-M9129-10 |
| GUIDE LINER ASSY. | KYL-M866D-000 |
| GUIDE,LINEAR | LWHD12X3 |
| DISK | KYB-M3T1A-000 |
| MOTOR_AC-SERVO | KYF-M860D-000 |
| PIN,HINGE | KYL-M860R-000 |
| LEVER | KYB-M3T01-000 |
| SHROUDED POGO BLOCK | 0938A-0007 |
| CYLINDER | KYL-M869A-000 |
| PLATE | KYA-M3804-000 |
| ASSY_HOOK | KYD-MC10T-000/016J0024 |
| SEAL | KYB-M702B-000 |
| SHAFT ASSY. | N510054811AA/N510069637AA |
| POWER SUPPLY | 11632XA |
| 16mm FEEDER JIG TAPE | KYH-M8603-00 |
| WASHER | KYD-MC22H-00 |
| Y AXIS GUIDE | SSR5XW2UUC1+970LYH |
| ASSY,SPROCKET | KYM-M862A-000 |
| COVER ASSY | X-4700-067-4 |
| NPM H8 SENSON | N510048691AA |
| NPM 12*16 FEEDER | KXFW1KSCA00 |
| GREASE FOR PANASONIC | N510048188AA |
| NPM H16 SHAFT | N510064335AA |
| ECLIP,0625 | P/N:0062-ECLIP-E |
| PIN_GUIDE | KYB-M122F-000/216F0879 |
| COVER | KYK-M86RD-000 |
| SONY1000 FILTER | 4-761-920-01 |
| BUCK_UP_PIN | KYA-M3802-000 |
| 904 NOZZLE | Y074-V904-0015 |
| NOZZLE(HB03C) | KYB-M7720-100 |
| UNIT,I/O | KYL-M86LV-000 |
| ETC MOTOR | PK2K93S-2D |
| PIN_LOCATE | KYD-MC21Y-000 |
| LEVER | KYB-M3T22-000 |
| PCB-MOUNT | KYK-M861W-000 |
| FEEDER | GD38080 |
| KIC ON BOARD | 6-10 CHANEL |
| BLOCK L3 | KYB-M960C-000 |
| HNS,CORD | KYL-M8621-000 |
| BOLT,HEX-SCT 6300007626 | 91317-04010 |
| ASSY_PLATE(MAGNET) | KYD-MC115-000 |
| HNS,LIGHTING | KYF-M861W-000 |
| SPRING_COMP | KYD-MC3T-000 |
| BRACKET | KYL-M86KD-000/211FC709 |
| BOLT,HEX-SCT 630 000 7503 | 91317-03006 |
| GS-FB100 VIBRATION FEEDER | KYD-MCHA0-R00 |
| BELT | N510065133AA |
| FUSE | KYL-M86KH-000 |
| ROCK | 2-149-675-01 |
| NOZZLE HG33C SET 15 | KYA-M8C07-100 |
| SLIP RING | KYB-M7027-000 |
| DRIVER | N510002593AA |
| ASSY_SPRING_FL | KYD-MC20U-000 |
| GEAR | KYD-MC21U-000 |
| ASSY_NOZZLE(BA05) | KYB-M77A5-B00 |
| BOLT-HEX-SCT | 90990-01J115 |
| UNIT_DRIVER | KYK-M860F-000 |
| GUIDE | KYD-MC11T-000 |
| GXH SPECIAL NOZZLE | 13053 |
| NOZZLE | HG53G |
| ROLLER(B) | KYK-M86EM-000 |
| TIMING BELT | KYB-M919E-000 |
| BELT | 44548605 |
| PLATE | N610014970AE |
| MOTOR_AC-SERVO | KYK-M86T6-000 |
| GEAR | KYU-M868B-000 |
| CASE-CONN | KYF-M860Y-000 |
| COVER (12/16mm) | KYD-MC20Y-000 |
| BUSH,BEARING | KYB-M3T3S-000 |
| DEK POWER SUPPLY | V6G00KZ/185312 |
| BOLT,HEX.SOCKET HEAD | KYK-M86NS-000 |
| PIN_LOCATE | KYD-MC132-000 |
| NPM H16 SENSON | N510054833AA |
| FEEDER CABLE | KYL-M869D-000 |
| NOZZLE(VC74) | KYK-M7725-000 |
| BLOCK | KYA-M7027-000 |
| COVER(RB) | KYD-MC10L-000 |
| ASSY_NOZZLE(BC02) | KYB-M77C2-B00 |
| BELT | 6*3080*0.9 mm |
| HOLDER | KYB-M702F-000/0916DK2D |
| GREASE GUN KH-35 | KXF08V7AA00 |
| SONY E1000 FILTER | 4-761-920-01 |
| CAM FOLLOWER | KYB-M704A-000 |
| 938 NOZZLE | 00322592-05 |
| NPM X479 VALVE | N510054843AA |
| SONY NOZZLE | CF25200 |
| SENSOR,PELEC | KYL-M86HL-000 |
| ASSY_LEVER(L) | KYD-MC11M-000 |
| ASSY_CABLE | KYL-M86NC-000 |
| CASE-CONN | KYK-M860Y-000 |
| LINE-SENSOR | KYF-M8607-000 |
| COUPLING | KYK-M86AW-000 |
| 8mm FEEDER JIG TAPE | KYH-M8601-00 |
| TORX FLAT HEAD 3*5 | P/N:M03X05-TFHS |
| UNIT-DRIVER | KYK-M861A-000 |
| GEAR(Feeder GEAR) | KYD-MC130-000/1016B209 |
| COUPLING | KYB-M7116-000 |
| HOLDER | KYB-M701R-000 |
| SEAL | KYB-M704E-000 |
| MACHINE SCREW | KYD-MC14G-000 |
| ASSY_BLOCK_TOP | KYD-M701U-000 |
| ASSY,GEAR | KYM-M862C-000 |
| COVER | KYM-M860X-000 |
| PIPE FITTING | 630 048 4656 |
| GUIDE,LINEAR | KYK-M86LE-001 |
| ASSY_NOZZLE(VA06) | KYK-M7720-A00 |
| GEAR | KYD-MC20K-00 |
| Encoder Read Head For Universal | 49566101 |
| BLOCK | KYL-M86KC-000/211G5472 |
| 234F NOZZLE | 45466931 |
| V8V11 (MOTOR_HL) | KYA-M700S-000 |
| NOZZLE_HG52C | KYA-M7705-000 |
| PCB-MOUNT G5 CUP2 | KYF-M868C-000 |
| NOZZLE(HB04C) | KYB-M7721-100 |
| FAN | 1204KL-04W-B59 |
| PIN,HINGE | KYD-MC61N-000/216D0472/6301305042 |
| RT BELT | 3-212-264-01 |
| GEAR | KYD-MC23C-000/6301352305 |
| NOZZLE(FA04) | KYB-M77F4-000 |
| AIR_LINE_EQPT | KYB-M704D-000 |
| SONY MOTHER BOARD | 1-797-651-12 |
| MICRO METER | 350-251-30 |
| SENSOR,PELEC | KYL-M8609-000 |
| BM02 NOZZLE | BM02 |
| POGO BLOCK | 0738A-0029 |
| GUIDE,LINEAR | KYK-M86LE-001 |
| MOTOR | KYA-M700R-000 |
| ASSY_LEVER | KYD-MC212-000 |
| LEVER | KYB-M3T0M-000 |
| FUSH-SPECIAL | KYF-M860F-000 |
| NOZZLE_HV14C | KYA-M7714-000 |
| NOZZLE(WC01) | KYB-M77W1-100 |
| COGNEX BOARD | KYK-M86PW-000 |
| COVER(LB) | KYM-M8657-000 |
| ASSY GEAR | KYD-MC20K-000/0926220R |
| PIN,HINGE | KYB-M3T31-000 |
| PULLEY,FLAT GXH | KYL-M8681-000 |
| Fuji Filter | AA1FZ04 |
| ASSY,SPRING,FLAT | KYM-M862H-000/6301592541 |
| DEK SQUEEGE | DEK-03T 长25CM |
| UNIT,DRIVER | KYK-M860K-000 |
| BLOCK | KYF-M867D-000 |
| NOZZLE_HG33C | KYA-M7703-000 |
| NPM 185 NOZZLE | N610070338AB |
| NOZZLE_HV19C | KYA-M7719-000 |
| NPM 235CS NOZZLE | N610043815AA |
| GREASE | N990PANA-023 |
| SPRING_COMP | KYB-M91CS-000 |
| MOTOR,AC-SERVO | KYK-M860P-000 |
| GUIDE,LINEAR | KYK-M860S-000 |
| NPM 8mm FEEDER | KXFW1S5A00 |
| ACCESSORY,SV | KYL-M861C-000 |
| BOLT_HEX-SCT | 90990-06J009 M4*20 |
| WASHER | 92902-03100 |
| I/O CABLE,WIDE | 0938A-1007 |
| 1220 NOZZLE | 51305323 |
| 222L0935 Sigma-G5 Y AXIS GUIDE_LINEAR | KYF-M867L-000 |
| SONY NOZZEL AF12082 | AF12082 |
| P/N:JG000912 8mm | P/N:JG000912 8mm |
| NOZZLE (U TYPE) | KYB-M3828-000 |
| 360F NOZZLE | 45466917 |
| BOLT,HEX-SCT 630 000 7664 | 91317-04020 |
| GEAR | KYK-M864C-000 |
| LIGHTING_UNIT | KYB-M700T-000 |
| SPRING COMP | KYD-MC422-000 |
| ASSY_GEAR (8mm) | KYD-MC12L-000/1016120W |
| SEAL | KYT-M862W-000 |
| SONY TRAY SHUTTER CYLINDER | 1-478-936-11/MXU16-20-M9N |
| NPM 235C NOZZLE | N610043814AD |
| 32mm FEEDER JIG TAPE | KYH-M8604-000 |
| BOLT_HEX-SCT | 90990-01J142 M3*12 |
| MOTOR,AC-SERVO | KYL-M867G-000 |
| BOTTON | ZB6-EB3B |
| TAIL PIVOT BEARING | P/N:0740C-0110 |
| ASSY_SUPPRESSOR | KYD-MC10R-000 |
| ASSY_TENSION | KYD-MC21N-000 |
| 0603 CPK JIG CHIP(KOA) | KOA RK73Z1HTTC |
| NPM 230C NOZZLE | N610040784AD |
| BELT | N510021326AA |
| GERA(HASUBA) | KYD-MC131-000 |
| VALVE | 4-187-212-01 |
| ASSY_NOZZLE(VA05) | KYK-M770J-A00 |
| ARM STEEL | N210007284AB |
| NOZZLE_SHAFT | KYF-M8619-000 |
| NOZZLE(BA06) | KYB-M77A6-000 |
| LEVER | KYK-M86LV-000 |
| NPM 226CS NOZZLE | N610040783AB |
| NPM 256CS NOZZLE | NPM 256CS NOZZLE |
| SHAFT ASSY. | KYF-M864U-000 |
| GEAR | KYD-MC153-00 |
| RETAINING RING,EXTERNAL | 0125-ERRING-E |
| GUIDE,LINEAR | KYK-M86KY-000 |
| SENSOR,PELEC | KYK-M86DE-000 |
| 935 NOZZLE | 00346524-03 |
| COVER(HIRA-1) | KYD-MC20X-000 |
| ASSY,HOOK | KYD-MC40A-000 |
| ASSY_NOZZLE(BT06) | KYB-M77BA-A00 |
| BELT_TIMING | KYA-M914W-000 |
| NOZZLE(FF01) | KYB-M77F1-000 |
| MOTOR_DC | KYD-MC410-000 |
| NPM 230CS NOZZLE | N610040788AD |
| PULLEY_TIMING | KYB-M91AL-000 |
| UNIT-IO(DOM4G) | KYF-M8602-000 |
| PIN-GAUGE | KXF00YHTA00 |
| ASSY,GUIDE,LINEAR | KYL-M861U-000 |
| HELICAL SPRING | N210068065AA |
| SPRING_COMP | KYD-MCN41-000 |
| SENSOR | KYF-M8681-000 |
| COUPLING | KYB-M702C-000 |
| NOZZLE HG52C set 15 | KYA-M8C07-200 |
| AIR_LINE_EQPT | KYB-M704D-000 |
| NPM 240C NOZZLE | N610062681AD |
| TAIL PIVOT | P/N:0740C-0109 |
| MOTOR,AC-SERVO | KYF-M860P-000 |
| SPRING | P/N:0730C-0252 |
| NOZZLE_HV13C | KYA-M7713-000 |
| BOLT-HEX-SCT | 90990-01J135 M2.5*6 |
| CLAMP_GUM | KYB-M3T1R-000/0920H153 |
| GT38080 FEEDER | GT38080 FEEDER |
| ETC INDUCTION MOTOR | PKRK93S-2A |
| GRIP | KYD-MC109-000 |
| ASSY GEAR | KYD-MC211-000 |
| GEAR | 4-719-921-02 |
| PIN_HINGE | KYD-MC42S-000 |
About Us
Merex Techonologies Co.,Ltd
In 2016, Shenzhen merex Technology Co., Ltd. was established to build a more timely and effective
communication platform, and realize the company's service tenet of serving leading customers.
The engineers of the company are professional technicians who have been certified by the original
factory for more than 10 years. They always adhere to the value of putting the interests of customers
first, and provide customers with high-quality equipment accessories, consumables, fixtures and
technical support services.
In order to effectively reduce the cost of customers, the company set up a machining plant, and
changed most of the feeder parts to self-produced parts, so as to ensure sufficient inventory and
reduce the cost of customers at the same time
SMT technical service - 20 years
SMT parts sales - 18 years
Export to foreign customers - 6 years
Fixture development and manufacturing - 5 years
It is precisely because meire technology has the following advantages over the same industry that
more and more customers choose meire as their preferred supplier.
Professional pre-sales advice support
Excellent after-sales technical service
One stop solution for SMT accessories
Flexible payment and return policy
Stock in the factory with sufficient stock and fast delivery
Merex is a professional company engaged in SMT one-stop technical services, mainly engaged
in Hitachi, Yamaha, Panasonic and other SMT equipment and accessories, with a professional
after-sales service team, committed to rapid, efficient and low-cost solutions to all kinds of SMT
problems encountered by customers in production. In addition, the company also developed
automatic feeder calibrator, Cpk test fixture and other related products, and obtained national
patents. Welcome agent!
All engineering personnel of Merex are trained by the original factory, with advanced testing
instruments and a full set of technical documents. The average SMT related work experience
is more than 15 years, so our response speed and technology are better than others
Merex pursues the quality and details of the mechanism, and strives to deliver every product
to customers as a top-quality product. No matter domestic or overseas customers, we have
unified standards. If there are problems occasionally, we promise to deliver goods first to
minimize the loss caused by downtime.
