Active Member
|
[China]
Address: Rm1025, International Culture Building, ShenNan Mid Road #3039, FuTian District, Shenzhen
Contact name:will
Shenzhen Zhaocun Electronics Co., Ltd. |
|
|
STM32H743ZGT6 ARM® Cortex®-M7 STM32H7 Microcontroller IC 32-Bit Single-Core 480MHz 1MB (1M x 8) FLASH 144-LQFP (20x20)
Datasheet:STM32H743ZGT6
| Category | Microcontrollers |
| Mfr | STMicroelectronics |
| Series | STM32H7 |
| Package | Tray |
| Product Status | Active |
| Core Size | 32-Bit Single-Core |
| Speed | 480MHz |
| Number of I/O | 114 |
| Program Memory Size | 1MB (1M x 8) |
| Program Memory Type | FLASH |
| RAM Size | 1M x 8 |
| Voltage - Supply (Vcc/Vdd) | 1.62V ~ 3.6V |
| Data Converters | A/D 36x16b; D/A 2x12b |
| Oscillator Type | Internal |
| Operating Temperature | -40°C ~ 85°C(TA) |
| Mounting Type | Surface Mount |
| Package / Case | 144-LQFP |
| Supplier Device Package | 144-LQFP (20x20) |
| Base Product Number | STM32H743 |
Memories
•Up to 2 Mbytes of flash memory with readwhile-write support
• Up to 1 Mbyte of RAM: 192 Kbytes of TCM RAM (inc. 64 Kbytes of ITCM RAM + 128 Kbytes of DTCM RAM for time critical routines), Up to 864 Kbytes of user SRAM, and 4 Kbytes of SRAM in Backup domain
• Dual mode Quad-SPI memory interface running up to 133 MHz
• Flexible external memory controller with up to 32-bit data bus: SRAM, PSRAM, SDRAM/LPSDR SDRAM, NOR/NAND flash memory clocked up to 100 MHz in Synchronous mode
• CRC calculation unit
Reset and power management
• 3 separate power domains which can be independently clock-gated or switched off:
– D1: high-performance capabilities
– D2: communication peripherals and timers
– D3: reset/clock control/power management
• 1.62 to 3.6 V application supply and I/Os
• POR, PDR, PVD and BOR
• Dedicated USB power embedding a 3.3 V internal regulator to supply the internal PHYs
• Embedded regulator (LDO) with configurable scalable output to supply the digital circuitry
• Voltage scaling in Run and Stop mode (6 configurable ranges)
• Backup regulator (~0.9 V)
• Voltage reference for analog peripheral/VREF+
• Low-power modes: Sleep, Stop, Standby and VBAT supporting battery charging Low-power consumption
• VBAT battery operating mode with charging capability
• CPU and domain power state monitoring pins
• 2.95 µA in Standby mode (Backup SRAM OFF, RTC/LSE ON)
Data Picture:
