Low TDS Domestic Ro Membrane 1812-50 Gpd 97% Desalination

Domestic 97% Desalination 50g Reverse Osmosis Water Purifier Parts RO Membrane

Characteristics of reverse osmosis membrane technology: this equipment has the advantages of compact structure, small floor area, low water production per unit volume, low energy consumption, etc., and has been applied in almost all industries. Without camouflage, it relies on the pressure greater than the osmotic pressure to drain the desalted water through the membrane capillarity. It also has the membrane screening function, which can remove very small bacteria and viruses.

The reverse osmosis membrane should have the following characteristics:

(1) high-efficiency salt rejection at high flow rates;

(2) high mechanical strength and service life;

(3) able to function at lower operating pressures;

(4) capable of Resistant to chemical or biochemical effects;

(5) It is less affected by factors such as pH value and temperature;

(6) The source of film-making raw materials is easy, the processing is simple, and low cost.

Performance and test conditions

Note: Single membrane permeate flow change in the range of ±15%

Test Conditions

Test Pressure 70psi (0.48Mpa)
Temperature 25 ºC
Concentration of Testing Solution (NaCl) 250ppm
Testing Solution PH value 6.5-8.5
Recovery Rate of Single Membrane Element 50%

1. When PH is above 10, the Maximum Temperature of Continuous Operation is 35ºC.
2. Under certain conditions, the presence of free chlorine and other oxidants in the water may cause serious membrane damage, which doesn't belong to product warranty range.

This standard specifies product specifications for reverse osmosis membrane elements for household and similar purposes (here in after referred to as reverse osmosis elements) .This standard applicable to reverse osmosis membrane elements that use municipal tap water or centralized water supply as raw water for use in homes and similar places.

FAQ: