Shandong Huarui Electric Furnace Co., Ltd. |
Verified Suppliers
|
|
Compared with thyristor , new generation IGBT transistor is
able to not only control conduction ,but also control its
turn-off action at will, however, the thyristor must be passively
turned off and requires time to finish this action. Inverter
power factor of IGBT transistor type is much higher (≥ 97%) and the
furnace voltage much higher under the same input voltage (380 V).
The IGBT inverter voltage is around 2800V, however, the
traditional thyristor inverter voltage is only 750V and can reach a
maximum value of 800V, therefore, the inverter voltage of IGBT
is four times higher than that of the thyristor type, and wiring
line loss is also low, about 15% energy saving is achieved.
Thick raw material for the shell of furnace, reasonable match
between induction ring and capacitor, intelligent type digital main
control board, constant output and high efficiency power factor are
guarantee for quick melting speed.
This medium frequency supply can drive two or multiple furnaces and
powered them at the same time, one is for insutaion and the
other furnace can melting the material, of course, both furnace can
also melting the raw material at the same time.
Induction melting furnace power supply, thyristor serial-connected inverter medium frequency power supply , one power supply cabinet drives two furnaces
Type | DX-1500Kw |
inlet power supply ( V) | 380V/ six phases |
inlet current ( A) | 1220A |
Direct current voltage (V) | 1000 |
Direct current (A) | 1500 |
medium frequency voltage (+-10%) V | 2400 |
medium frequency (Hz) | 100-400Hz |
medium frequency power (Kw) | 1500KW |
Our First Class Medium Frequency Induction Melting System is widely
used for melting metals such as iron, steel, copper and aluminum
as well as other non-ferrous and ferrous metals. It is
suitable for melting and it is an ideal choice for melting.
For Induction Melting System, we understand that you expect the highest quality of service and
technical support . Our team of specialists are here to provide you
with prompt and reliable assistance for any technical issues you
may encounter.
We provide a wide range of services, including:
We are dedicated to providing you with the best possible service and technical support for your system. If you have any questions or need assistance, please do not hesitate to contact us.
Packaging and Shipping for Induction Melting System:
Induction Melting System will be packaged in a wooden box
with heavy-duty foam padding to ensure that it arrives in good
condition during the shipping process. .
The system will be shipped via a reliable freight carrier and the
delivery will be tracked to ensure that it arrives on time. All
necessary paperwork, such as invoices and shipping documents, will
be included in the package.