|
[China]
Trade Verify
Address: No. 255 Xiangzhang Road,Yuhua District,Changsha.
Contact name:Hank
HUNAN MEGA DRILLTECH CO., LTD. |
|
Verified Suppliers
|
|
|
MDT-30 construction drilling rig is used for drilling anchor holes in deep base pit of high building,anchor and reinforce side-slope for water conservatory project, water power station project,railways and highways . Especially used for drilling anchor holes in high position side-slope protection and drainage holes.
● MDT-30 drilling rig is a full hydraulic operated top drive
power head drill. It is composed of main set, control panel and
pump which are connected together with flexible joint. So it
features simple in structure, good disassembility and convenient to
mount and transport.
● Operating drill through the centralized control panel ensures
assure safety operation and on-site cleanliness.
● Transmission, built in the top drive power head, has two speed
range ― high and low. It can meet the requirements of both DTH
hammer drilling and carbide bit drilling.
● Hydraulic part is an international famous brand product which
ensures drilling rig's high reliability and permanence stability.
| Drilling depth (m) | 40-30 |
| Drilling diameter (mm) | ¢ 80- ¢ 130 |
| drill diameter (mm) | ¢ 50 × 1500 ¢ 73 × 1500 |
| Drilling dip | 0-360 ° |
| power head output speed (positive and negative r / min) | 24-114 |
| power head output torque (N.m) | 1500 |
| Power head stroke (mm) | 1800 |
| power head maximum pull force (KN) | 30 |
| Power Head biggest feeding force (KN) | 15 |
| motor power (kw) | 15 Type Y160L-4 |
| Rig Weight (kg) | about 550 |
| after assembly Dimensions (mm) | 2700 × 1150 × 1400 |
