DLO Wind Turbine Cables Torsion Resistance Single Core Copper Wire RoHS 1kV

Torsion Resistance Wind Turbine DLO Cable

APPLICATIONS
DLO is especially suited to supply power to traction motors of diesel-electric locomotives. It is also recommended as a portable cable for drilling rigs, on-shore or off-shore, railroad and transit car wiring, electric earth-moving equipment, in shipyard applications, arc welder supply leads, power and control jumper cable, and motor leads. The cable is suitable for use in wet or dry areas, conduits, ducts, troughs or trays, and where superior electrical properties are desired. The maximum continuous conductor temperature for normal operation is 90°C in wet or dry locations. DLO resists oils, acids, alkalines, heat, flame, and has abrasion resistance.

CONSTRUCTION
DLO Cables are manufactured in sizes 14 AWG through 1111.0 KCMIL with stranded tinned annealed copper. A paper or polyester tape separates the conductor from the EPDM rubber insulation to aid in stripping. A black, heavy duty CPE sunlight resistant jacket is extruded over the insulation.

SPECIFICATIONS
Made in accordance with UL Standards
• RoHS Compliant
• UL listed as Type RHH-RHW-2 per UL 44
• Meets FT-4 / IEEE 1202 and VW-1 Flame Tests
• Oil Resistant / Sunlight Resistant / -40 °C