Active Member
|
Address: 2F, Building 15, Longbi Industry Park, Dafa Road, Bantian, Longgang District, 518129, Shenzhen, P.R.China
Phone: 86-755-29340062
Contact name:Roger Chen
Fiberroad Technology Co., Limited |
|
|
Multimode Power Over Ethernet PSE Media Converter Over-current protection
FR-POE332 series is a 10/100/1000Base-TX to 1000Base-FX (also can be forced to 100Base-FX) media converter, which allows two types of network segment to be connected easily. Complied with IEEE802.3at or IEEE802.3af standard, the AC/DC powered PoE media converter is a Power Sourcing Equipment (PSE) which combines data transfered over a fiber optic link with 48V (or other voltage) power supply, providing power to IEEE802.3at or IEEE802.3af powered device (PD) over CAT5e/CAT6 UTP cable (cable length up to 100meters / 330feets).
The converter includes a single port PSE controller, which offers PD signature sensing and power monitoring features. Other features include over-current protection, LFP function, etc. The LFP (Link Fauit Pass-through) allows the media converter to monitor both the fiber and copper RX port for loss of signal. In case of a loss of RX signal on one media port, the converter will automatically disable the TX signal to the other media port, thus passing through the link fault.
Key Features
Specification
Data Rates | 10/100/1000Mbps(IEEE802.3U IEEE802.3z 1000Base-Tx) |
1000Mbps (1000Base-FX) or 100Mbps (100Base-FX) | |
Input Power Requirements | |
Input voltage | 100 VAC to 240 VAC |
Input frequency | 47 Hz to 63 Hz |
Power over Ethernet Output | |
Pin Assignment and Polarity |
|
For IEEE802.3af standard | 1/2 (V+),3/6 (V-) |
For IEEE802.3at standard (30watts maximum) | 1/2 (V+),3/6 (V-) |
For IEEE802.3at standard (50watts maximum) | 1/2/4/5 (V+),3/6/7/8 (V-) |
Output Power | please refer to ordering information |
Efficiency | 75% min |
Short circuit protection | auto recovery |
Over current protection | auto recovery |
Environmental Conditions | |
Operating temperature | 0℃ to 50℃ |
Cooling | free air convection |
Storage temperature | -20℃ to +85℃ |
Operating Humidity | 90% max, non-condensing |
Mechanical Specifications | |
Case Material | Iron |
Case Color | Black |
Net Weight | 560g approx. / unit |
Dimensions | 110(W) x 40(H) x 140(L) (mm) |
Do not include transceiver length | |
Connectors | |
AC Inlet | IEC-J-4 |
LAN | Shielded RJ-45 |
Fiber | see ordering information |
Ordering information
P/N | Description | - | X | X | - | X | X | X | X |
FR-POE332-XX-XXXX | 10/100/1000M POE (PSE) Media Converter |
| T: IEEE802.3at F: IEEE802.3af N: Non－standard | 1:15.4W 2: 25W 3: 30W 5: 50W |
| S: Duplex Single-mode M: Duplex Multi-mode B: Simplex Single-mode SFP: SFP Slot | 3: TX 1310nm 4: TX 1490nm 5: TX 1550nm 8: TX 850nm | S: SC F: FC T: ST L: LC | 05: 550M 2: 2KM 20: 20KM 40: 40KM |
